Displaying 5 results from an estimated 5 matches for "qualifyfreqnotok".
2012 Jun 12
1
IAX2 Registered OK without IP
This has come up before on the list and archives but I don't seem to
find a solution for this. On just a few nodes we have this situation
where we see the IP disappear from the CLI iax2 show peers list but
the status shows OK:
3012/3012 (Unspecified) (D) 255.255.255.255 0 OK (89 ms)
How can the status be OK a few milliseconds ago and have no IP ?? The
strange thing is
2013 Aug 21
1
IAX qualify timers
...bug in the qualify timers for IAX on asterisk
1.8 but I'd like to check if I'm not messing up in my config somewhere
before reporting a bug.
In my IAX peer configuration I have this:
[remote-host]
type=friend
host=172.16.6.45
username=remote-host
secret=test
notransfer=yes
qualify=16000
qualifyfreqnotok=30000
disallow=all
allow=alaw
allow=ulaw
allow=ilbc
auth=md5
encryption=no
With this configuration, I expect that I can receive a response PONG
message from 172.16.6.45 up to 16 seconds after the POKE is sent out
before the peer is marked UNREACHABLE or LAGGED.
On the 172.16.6.45 machine I ha...
2011 Apr 20
1
[IAX] Everyone is busy/congested at this time (1:0/0/1)
...aultip,sourceaddress,mask,regexten,regseconds,accountcode,mohinterpret,mohsuggest,inkeys,outkey,language,callerid,cid_number,sendani,fullname,trunk,auth,maxauthreq,requirecalltoken,encryption,transfer,jitterbuffer,forcejitterbuffer,disallow,allow,codecpriority,qualify,qualifysmoothing,qualifyfreqok,qualifyfreqnotok,timezone,adsi,amaflags,setvar)
VALUES ('admin.my.domain','friend','100','admin at my.domain','123','','default','','dynamic','10.0.100.56','26564','','','','','0','...
2009 Oct 23
1
Strange IAX2 / Iaxmodem problem
...) that lead to the UNREACHABLE state don't appear on the console and on the log I get only 10% of the total state change messages I was getting first. Disabling the debug, the lines reappear as before.
The state is changed from UNREACHABLE to REACHABLE after 10 seconds(given by qualifyfreqnotok), as documented above.
Here is what I'm using to do my tests:
Debian 5.0.2 Kernel 2.6.26
Asterisk 1.4.21 (tried 1.6 but the problem it's still there)
Iaxmodem-1.1.1
DAHDI 2.2.0
Sangoma A104 CARD and to be safe...
2006 May 01
1
Using frequent keepalives to eliminate need forNAT port forwarding?
Qualify=yes will send a SIP OPTIONS periodically and keep the NAT open,
if you use 1 to 1 NAT (versus PAT where it is "many to one NAT") it will
work because port 5060 on the private address will still be port 5060 on
the public address.
With PAT the port could be anything over 1024, but usually much higher,
and the originator will send to port 5060, which your NAT router will
drop.