search for: pyunyh

Hi list, Are there any problems with the if_re ? After upgrade RELENG_7 on my laptop NIC stopped to work:( uname -a: FreeBSD notebook.minsk.domain 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #3: Fri Apr 10 20:38:55 EEST 2009 root@notebook.minsk.domain:/usr/obj/usr/src/sys/tiger-asus-a6m i386 notebook# dhclient re0 DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on re0 to

I'm having problems getting PF + ALTQ to work on em(4) interfaces under 8.0-RELEASE. Kernel was rebuilt with the additional options necessary for ALTQ and what not. Same basic configuration works fine under 7.2-RELEASE. Basically, the queues create successfully but running a pfctl -vsq shows a zero packet/byte count for all queues, even the interface's root queues. This same problem is

Hi, tuning my network fixing nic's speed and duplex (both on server and switch) i got this error with bce driver: # ifconfig bce0 bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> ether 00:15:c5:fe:11:01 inet 192.168.1.13 netmask 0xffffff00 broadcast

Hello, after upgrading my system from 7.1-RELEASE to recent RELENG_7 I noticed stalled network transfers in certain cases. I have an Intel PRO/100 ethernet adapter (card=0x00408086 chip=0x12298086 rev=0x0c). In general networking works fine. I can ping hosts, surf on websites and so on. But if I send large files (>1 MB) to my server the transfer stalls after a few kilobytes. This concerns FTP

Hello! Is anybody having stability problems with if_re under FreeBSD 6.3-stable? I know about PR kern/118719[1] but it doesn't look like the problem I'm having - at least my machine doesn't panic. My machine[2] runs FreeBSD 6.3-stable / amd64: root@kg-vm# uname -a FreeBSD kg-vm.kg4.no 6.3-STABLE FreeBSD 6.3-STABLE #1: Sun Jan 27 02:10:15 CET 2008

Hi I installed the following driver. http://www.f.csce.kyushu-u.ac.jp/~shigeaki//software/freebsd-nfe.html Before I had the nve driver which was unstable on this server and on a prior server in both cases causing either spontaneous reboot or just a crash when under load. So far touchwood the nfe driver has stayed up and running at almost 3 days uptime and has had some stress. I know the driver

Hi, I noticed that network connection of one of my boxes got significantly slow just after upgrading it to 8.0R. The box has an em0 (82547EI) and worked fine with 7.2R. The symptoms are: - A ping to a host on the same LAN takes 990ms RTT, it reduces gradually to around 1ms, and then it returns to around 1s. The rate was about 2ms/ping. - The response is quite slow, but no packet

Monitoring a tcpdump between two systems, a FreeBSD 9.1 system has the following interface: msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c011b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,VLAN_HWTSO,LINKSTATE> ether 00:11:2f:2a:c7:03 inet 10.0.1.199 netmask 0xffffff00 broadcast 10.0.1.255 inet6 fe80::211:2fff:fe2a:c703%msk0 prefixlen 64 scopeid

----- Original Message ---- > From: Pyun YongHyeon <pyunyh@gmail.com> > To: Ian FREISLICH <ianf@clue.co.za> > Cc: FreeBSD Current <freebsd-current@freebsd.org>; Robert Backhaus <robbak@robbak.com> > Sent: Monday, March 17, 2008 8:12:03 AM > Subject: Re: Packet corruption in re0 > > On Fri, Feb 22, 2008 at 10:43:22AM...

Hi all, I am having an issue where my hme0 interface is always turning up and down with dhclient requesting a lease. I am thinking this could be the same issue described by Jeremy Chadwick on June 9th: http://lists.freebsd.org/pipermail/freebsd-stable/2013-June/073711.html Everything was fine on 8.2-STABLE and older versions. It was then upgraded directly to 9.0-STABLE

Hello I have some problems with 3Com nics, after a upgrade from 5.5-STABLE to 6.4-STABLE. This machine has two 3com nics (one is LAN other is WAN) and i see too much "watchdog timeout" on both cards. This on/off up/down on cards, affect the interrupt to clients that are downloading from apache web server, especially on large files. --------------------------------------------

1. I have a realtek network card and am using a cable modem router. Does anyone know if fixes for problems with these (see below) have been backported from HEAD to RELENG_7? 2. Is this a good time to upgrade to RELENG_7? 3. I read a post last week that advised that 7.1 is a long way off. Appreciate any advice on use of ULE 3.0 and ZFS prior to 7.1 and a comment on what is holding up 7.1. Thanks