search for: pxe

...#39;t expect people to be crying out for a 5.02 final release, but if that is something that people want we can always do it retroactively at any time. That isn't a problem. With Syslinux-5.10-pre1 we've now got two network stacks; the old legacy stack which is a very thin layer around the PXE interface, and the new lwIP TCP/IP stack. The easiest way to include both of these stacks in Syslinux was to build two separate .0 files, pxelinux.0 for the legacy stack and lpxelinux.0 for the lwIP stack. Note there are no plans to make the new http/ftp code work with the legacy stack, it's ma...

Hi: First - pxelinux works great - got it up and running with few problems. However - I ran into a snag, I am assuming I have a configuration issue. Here are the details. Using: syslinux-1.75 dhcp-3.0pl1 tftp-hpa-0.29 A lot of what I have done is from: http://frank.harvard.edu/~coldwell/diskl...

Hi, I have a Linux server at ip address 10.215.144.7 running DHCP, TFTP and syslinux. DHCP config contains the following: next-server 10.215.144.7; filename "/pxe/syslinux/pxelinux.0"; and the 'default' pxelinux.cfg contains: LABEL altiris ??? MENU LABEL ^7. Altiris ??? COM32 pxechn.c32 ??? APPEND 10.215.144.60::/BStrap/x86pc/BStrap.0 When a PXE client boots in my network it loads the menu from 10.215.144.7. However, when the user selects men...

Sorry for top-posting but my webmail forces me to. I added -W to the APPEND line as suggested but I'm still getting the same result: Booting... Altiris, inc. X86PC PreBoot, PXE-2.x Enhanced Build ID=402 PXEPreZero: Invalid PXE Server list format. and the client PC freezes right there. Here's the full content of my dhcp.conf: max-lease-time 86400; ddns-update-style interim; ddns-domainname "mydomain.org."; ddns-rev-domainname "in-addr.arpa."; ign...

The behaviour of default ISRs as provided by the BIOS varies wildly between platforms. Some will simply iret, some will send EOI, some will send EOI and disable the interrupt at the PIC, some will crash the machine due to single-bit errors in the ISR address. When PXENV_UNDI_ISR_IN_START returns PXENV_UNDI_ISR_OUT_NOT_OURS, send the EOI ourselves rather than risking the unpredictable behaviour of chaining to the original ISR. Signed-off-by: Michael Brown <mcb30 at ipxe.org> --- core/fs/pxe/isr.c | 5 +++-- core/fs/pxe/pxe.h | 1 - core/pxeisr.inc | 1...

Hi, I've got pxelinux 2.00 working to boot rh 7.3, 8.0, and phoebe-beta pxe install images but I've recently tried to load the rh 9 pxe install images and I get this.. 4000 AX:0208 BX:0200 CX:0002 DX:0000. Any thoughts? Thanks aaron

Hello, Starting version PXELINUX 3.83 2009-10-05, i am not able to boot anymore using "localboot 0" entry. It show "" Booting from local disk... """ Then loop on the network boot of the interface then after a few try show the message: """ It appears your computer has less...

Hi everybody Attached you will find a file pxe.mnu (encoded with mime). It is PXE menu file created by 3COM MBA IMGEdit.exe tool. It is very strange since: 1) When I point DHCP bootfile to this file it loads with no problem and the menu is displayed. 2) When I point DHCP bootfile to pxelinux.0 and in pxelinux.cfg I put the command "KERNE...

Issue Statement: PXE booting from BIOS systems works fine on both 6.03 and 6.04-pre1. New clients only support (u)EFI which results in the inability to load remote kernel or initrd. Tested with both Syslinux 6.03 and 6.04-pre1. So far unable to boot any (u)EFI clients unless both initrd and kernel are on PXE server. U...

Currently, the TFTP configuration file discovery process will request a set of files based on the UUID, MAC address, lease IP address and eventually fall back to "default": /mybootdir/pxelinux.cfg/b8945908-d6a6-41a9-611d-74a6ab80b83d /mybootdir/pxelinux.cfg/01-88-99-aa-bb-cc-dd /mybootdir/pxelinux.cfg/C000025B [...] /mybootdir/pxelinux.cfg/C /mybootdir/pxelinux.cfg/default When serving PXE config files to machines of different architectures (requiring separate boot images...

hpa, etal, pxelinux works great from a push of the reset button. machine boots normally. However, after i issue 'reboot' command, my box fails to find the tftp server during reboot. This looks to be happening before pxelinux has any chance to participate, so it cannot be to blame. Im seeking corroborat...

...sed Yahoo but I didn't think I had that issue. GMail does default to top-posting but clicking the ellipsis to look at the previous email is enough. > I added -W to the APPEND line as suggested but I'm still getting the same result: > > Booting... > Altiris, inc. X86PC PreBoot, PXE-2.x Enhanced > Build ID=402 > PXEPreZero: Invalid PXE Server list format. > > and the client PC freezes right there. Strange. Only the ACK and REPLY packets have your TFTP's IP address. This sounds like we'll likely need to force an option in to tell it where to find the Altir...

The following changes since commit 6438fbcb6cb7e0cd40e4bb3681ada047fe77ffdd: Gene Cumm (1): Allow for UNDIIF_ID_DEBUG in 1 mk line are available in the git repository at: git://github.com/geneC/syslinux.git elflink-pxe-fixes-for-mfleming https://github.com/geneC/syslinux/tree/elflink-pxe-fixes-for-mfleming Gene Cumm (12): core/lwip/undi: Improve UNDIIF_ID_DEBUG messages core: mbox/semaphore NULL checks core: make mbox_post()/__sem_down_slow() check if valid PXELINUX: Use sendto() instea...

I am sending a patch that makes the debugging output of PXELINUX slightly more concise, without (intentionally) affecting its completeness at all. Additionally, I am proposing that the debugging output of PXELINUX -- specifically the messages that appear after the copyright statement, but before the menu is loaded -- only be shown in response to keyboard i...

Hi, hm at seneca.muc.de schrieb am 29.05.03 21:40:34: > I would like to load pxelinux as a second stage bootloader from a machine > which does not have a PXE BIOS (namely, from a VMware guest machine) in > order to perform an automated Linux installation. A boot floppy would > be nice. It seems that there are some commercial solutions around but > is there someting...

...the same configuration doesn't work for my desktop computer with Intel network card, with Intel Boot Agent 2.2 DHCP server is 10.0.0.1, tftpd (used tftp-hpa) runs on 10.0.0.32. netstat told me the daemon listen to 69 UDP port just fine. running tftp in commandline also shows it works (retrieve pxelinux.0 less then 1 second). The Thinkpad X32 boots fine (I think their boot code is based on intel boot agent too), loads Linux kernel fine. The desktop computer with IBA 2.2 boots, obtain IP address like this: DHCP Client: 10.0.0.7 MASK: 255.255.255.0 DHCP IP: 10.0.0.32 GATEWAY...

Question: If syslinux.efi is loaded locally off USB rather than via an EFI PXE option ROM boot, but on a client whose EFI firmware has TCP support, should that locally-booted syslinux.efi be able to process HTTP URLs? Initial experiments indicate "no", but why not? Purpose: My TCP-capable EFI client is on a subnetwork with broken DHCP not under my control, s...

...th by being >>> unauthenticated. If an unauthenticated client can't have any network access, >>> that's what they get. Presumably you could drop an unauthenticated machine >>> into a different VLAN. >> >> That would be a problem because clients using PXE-boot require network access, >> and it wouldn?t contribute to security if unauthorized clients were allwed to >> PXE-boot. >> > So restrict based on MAC address at the PXE boot stage. MAC addresses could be faked. > The PXE protocol, as far as I can see, has no concept of...

Currently it appears that when PXE booting the domain search option is ignored and only the domain name option used for name resolution. The following patch adds support for domain search path usage when PXE booting: - adds parsing of the DHCP domain search option (119) - When resolving names via dns_resolv uses the search path...

...ocessing the result as if it were a single option value. In particular, the server is ending each instance of option 43 with tag 255 (END). This has the effect that a correct client ignores everything after the first END tag(*). This means the client sees only the following vendor options: 1 PXE MTFTP IP address 2 PXE MTFTP client por 3 PXE MTFTP server port 4 PXE MTFTP timeout 5 PXE MTFTP delay 6 PXE discovery control 8 PXE boot server list The client would _not_ see these options: 9 PXE boot menu 10 PXE menu prompt control 71 PXE boot item 224 private use? pr...