search for: pw_command_start_byt

...DSAups Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3) RS-232 communication subdriver 0.17 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyUSB0" 0.000035 debug level is '5' 0.008369 Attempting to autodect baudrate 1.603672 Receive error (PW_COMMAND_START_BYTE): 0!!! 2.604114 Receive error (PW_COMMAND_START_BYTE): 0!!! 3.604528 Receive error (PW_COMMAND_START_BYTE): 0!!! 3.604547 No response from UPS on /dev/ttyUSB0 with baudrate 1200 5.199170 Receive error (PW_COMMAND_START_BYTE): 0!!! 6.200268 Receive error (PW_C...

...the communication is regained for a few minutes but then drops again. Below are excerpts from running '/lib/nut/bcmxcp -DDD -a pw9120'. Any ideas? Many thanks, Chris 0.000000 debug level is '3' 0.000659 Attempting to autodect baudrate 1.591977 Receive error (PW_COMMAND_START_BYTE): 0!!! 2.592977 Receive error (PW_COMMAND_START_BYTE): 0!!! 3.593976 Receive error (PW_COMMAND_START_BYTE): 0!!! 3.593992 No response from UPS on /dev/ttyS0 with baudrate 1200 5.184976 Receive error (PW_COMMAND_START_BYTE): 0!!! 6.185976 Receive error (PW_COM...

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

Hi, I have an HP R5500XR and a Compaq R3000XR that I would like to use with nut. I searched the compatibility lists and the mail list archives but couldn't find anything. They both have 9 pin serial ports. Can anyone give me any information about them, and if they are supported by nut? Thanks, Denny Fox

Hi All, I'm a system administrator of a large data center, and I've recently replaced the machine that acted as the nut master for our cluster/cloud. The machine that was interfacing with our Powerware 9135 450KVA 3 phase UPS, not to confused with Eaton's Powerware 9135, and was a Fedora Core 4 box running nut version 2.0.3-4 connected by a serial cable. We are using these versions

Fellows, time has come for a new NUT release: I'm planning on 2.6.1 next week (max Friday 27), and I'm currently processing remaining patches. If you have some more on your side, please send in. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

On Jun 10, 2013, at 11:05 AM, Jim Seymour wrote: > I tried all three: bcmxcp (produced only "Receive error > (PW_COMMAND_START_BYTE): 0!!!"), blazer_ser ("blazer_status: short > reply") and bestups ("debug level is ..." and "Unable to detect..."). You mentioned the null-modem cable, but are you using a motherboard RS-232 port, or a USB-to-serial converter? This thread has some informatio...

Hi There, We have this rather large-ish floor-standing Best Axxium Pro, Model Series 0650. I tried using both the "bestups" and "blazer_ser" drivers with it, but no go. So before I go any further: *Should* one of these work with it and, if not, do I have any options? (E.g.: Modify a current driver, resuscitate one that was started and abandoned, etc.? I can code.) My test