search for: pvc1

Hello lartc! I have strange problem setting load balancing over 4 interfaces. Something won''t accept more than 3 interfaces, While setting: ip route add default scope global \ nexthop via 0.0.0.0 dev pvc0 weight 1 \ nexthop via 0.0.0.0 dev pvc1 weight 1 \ nexthop via 0.0.0.0 dev pvc2 weight 1 It''s ok: ip r l default nexthop dev pvc0 weight 1 nexthop dev pvc1 weight 1 nexthop dev pvc2 weight 1 But while I try to do same over 4 interfaces: ip route add default scope global \ nexthop...

...w [all|qdisc|class|filter] [devices] [root@qos tcng]# ./tcng stop Stopping some/all tcng services: No traffic control running on : eth0 Flushing : eth1 No traffic control running on : hdlc0 No traffic control running on : hdlc1 No traffic control running on : pvc0 No traffic control running on : pvc1 [root@qos tcng]# ./tcng start Starting tcng services: Execute : qdisc add dev eth1 handle 1:0 root dsmark indices 4 default_index 0: Execute : qdisc add dev eth1 handle 2:0 parent 1:0 htb: Execute : class add dev eth1 parent 2:0 classid 2:1 htb rate 56000bps: Execute : class add dev eth1 paren...

...ata-end = 24 alignment = same (The following is what our Vina T1 Integrator currently has in its settings. Our Linux box will replace the Vina) Synchronous Interface: encapsulation = Frame-Relay HDLC-inversion = off Encap-data: LMI-Type = T1.617-annex-D N391 = 6 N392 = 3 N393 = 3 T391 = 6 PVC1 : DLCI = 100 IP = ---.---.---.--- netmask = 255.255.255.252 RIP = disabled NAT = OUT Thank you for the help ahead of time! --Shawn