Displaying 5 results from an estimated 5 matches for "puc0".
Did you mean:
puc
2008 Nov 25
1
sio vs uart vs ucomm problems / differences
...cked devices, but still works with
sio. Stranger still, the app works with the uart driver when uart
attaches to the built in com port on the isa bus. However, its uart
devices when its connected to a PUC backed serial card where the
problems happen.
e.g. when the uart driver attaches as so,
puc0: <Oxford Semiconductor OX16PCI954 UARTs> port
0xe520-0xe53f,0xe540-0xe55f mem
0xa0005000-0xa0005fff,0xa0006000-0xa0006fff irq 15 at device 17.0 on pci0
puc0: [FILTER]
uart0: <16950 or compatible> on puc0
uart0: [FILTER]
uart1: <16950 or compatible> on puc0
uart1: [FILTER]
uart2:...
2008 Nov 30
1
panic: spin lock held too long on 7.1-PRERELEASE (sio)
...on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM.
System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC.
This happens with VSCom Card that was previously in use in a
5.3-STABLE system (also hp server, but older hardware) without
problems. The card is a 8-port serial card using puc0 and puc1
with 4 ports each.
Interestingly, problem seems to occur only if sendfax is using
devices attache to puc1. Works without problems at the moment
with sendfax only using puc0-sios. See dmesg below.
Any ideas what might be causing this, or is this even related
to kern/121322, 118044 or 1179...
2006 Apr 05
0
sunix rs-232 pcmcia card
...sio5,
but when i try to open these device the system freeze and must be restarted.
the same result with editing sio_pci.c
does anybody else use it?
i'm prepared to provide any additional information.
-- after inserting card into slot:
cardbus0: Resource not specified in CIS: id=10, size=20
puc0: <Sunix CBS2000X> port 0x1000-0x101f irq 10 at device 0.0 on cardbus0
sio4: <Sunix CBS2000X> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <Sunix CBS2000X> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mo...
2008 Aug 16
0
Panic in nfs/ffs after upgrade from 6.2 to 6.3-RELEASE
...usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
puc0: <Dolphin Peripherals 4036> port 0xcc00-0xcc1f,0xc880-0xc887,0xc800-0xc807 irq 20 at device 1.0 on pci1
sio4: <Dolphin Peripherals 4036> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <Dolphin Peripherals 4036> on puc0
sio5: typ...
2003 Sep 03
0
System hanging in acpi during shutdown
...0xdf7fffff,0xdfefc000-0xdfefffff,0xdc000000-0xddffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
pcm0: <Creative CT5880-E> port 0xec00-0xec3f irq 10 at device 8.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
puc0: <Oxford Semiconductor OX16PCI954 Dual UART> port 0xe400-0xe41f,0xe800-0xe81f mem 0xdfffe000-0xdfffefff,0xdffff000-0xdfffffff irq 10 at device 11.0 on pci0
sio2: type 16550A
sio3: type 16550A
sio4: type 16550A
sio5: type 16550A
pci0: <unknown card> (vendor=0x1415, dev=0x9500) at 11.1 ir...