search for: psched_clock_source

Hey, fellow LART controlllers, I''d like to ask if someome has a real esfq experience with HTB class hierarchy and esfq qdiscs. Lets say that I want to unite the connections to 10 client PCs with u32 or fw filters (doesn''t matter which one in fact) into one HTB class with esfq qdisc at the end. Did anyone tried it, and more important, did it worked the way it is supposed to? As

During my tests I''m starting to feel stupid :). Traffic shaping works quite on its own. System: RedHat 7.3, RedHat kernel 2.4.18-18.7.xsmp, HTB version 3.6, interfaces eth0 and eth1 are acting as bridge br0. If TCP shaping almost works, it just exceeds limits UDP is not shaped. Traffic flows PC=>eth0=>eth1=>PC. Statistics shown is for just UDP traffic (1mbit of small udp

Hello one more time, As others seem to already asked without reply, I''m getting lower speed rates than specified via ingress. How do I know. Because I have this in my script: tc qdisc add dev $DEV handle ffff: ingress # Filter intranet traffic, so fit it to intranet speed tc filter add dev $DEV parent ffff: protocol ip prio 10 u32 \ match ip src $Q_2_HOSTS \ match ip dst

Hi there! I am working a lot with VoIP in my company, so I thought to use linux bridge functionality together with tc to emulate delay, jitter, packet loss, duplication, reordering etc. for testing purposes in our lab against our VoIP products. I just recognized, that a basic bridge just with it''s minumum configuration of 2 network interfaces creates latency of approx. 5ms on very low

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I''m absolutely new to tc and found The Ultimate Traffic Conditioner to be exactly what I wanted as a starting point. Now the script doesn''t behave as I expected though, which applies to both the CBQ and HTB versions, the latter of which being my preference. The only changes made to the script are these assignments:

Dear All, I need to setup different route with different tos value. I can use the flowing command to add a tos route to routing table. ip route 192.168.0.2/32 via 192.168.0.1 tos 0x1c and ip route 192.168.0.2/32 via 192.168.0.1 tos 0x40 I used "ping -Q" to test it with different tos, the output packet is marked correctly. The problem that is only the tos value defined at

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

Hi, machine: AMD K6 200 MHz Linux distribution: Mandrake 8.1 kernel: compiled 2.4.21 applied this: #define PSCHED_CLOCK_SOURCE PSCHED_CPU in file linux/include/net/pkt_sched.h bevore compiled the kernel (described on http://www.docum.org/stef.coene/qos/faq/cache/40.html) bandwitch on eth0: 128kbit The most simple configuration - 122kbit guaranted for WWW (sport 80) and 6kbit for the rest. tc qdisc del root dev eth0 t...