search for: ps514

...by sip clients or by asterisk itself ? What I have to configure in ATA and what keys I have to press on my phones ? Three way calling is enabled by setting bits 28-29 to 10 ( Select the Cisco VG248 Style for mid-call services. as described at http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00800c4d1f.html#42433 But it seems not works,I always get conference call with 3 persons. -- Pavel Zheltouhov

Should I expect a standard fax machine connected to an ata-188 connected to an asterisk server, connected to a pri fed from a cisco 7206vxr to work correctly? It needs to have a standard fax machine, receiving and emailing it won't be acceptable. Thanks dave -- Dave Weis "I believe there are more instances of the abridgment djweis@sjdjweis.com of the freedom of the

...188 working with any kind of fax machine? I've tried many different configuration following the Cisco Online Manual and I couldn't get this working with Asterisk. I were trying do change the ATA Connect Mode and Audio Mode reading the (http://www.cisco.com/en/US/products/hw/gatecont/ps514/ products_configuration_example09186a00800d698e.shtml) and allowing all codecs on Asterisk and did not work either. best regards Oz

...from the TFTP server. CSCeb40099 The Cisco ATA plays an incorrect tone after unconditional call forwarding is enabled or disabled. CSCeb44406 Change the behavior of the Cisco ATA to not remove all registrations. Full information can be found here: http://www.cisco.com/en/US/products/hw/gatecont/ps514/prod_release_note09186a00801a2519.html JT

Hi, Is there is some form of VAD on * for SIP channels, cause I have a problem with MOH. I made an extension which simply plays MOH, when I dial that extension with my ATA188 MOH sounds choppy if I talk on the phone the MOH keeps playing. I saw the sip channel (show channel SIP/*) and I see no packets going in/out when I talk then packets shows going in/out. I don?t have this kind of problem

Hi All, Having searched the archives, I can see there has been much discussion at various points regarding capture of caller id information from good old BT. If I understand correctly, it seems that not only do the drivers not currently support it, but my X101P possibly/probably can't do it anyway due to hardware? So, that leaves me with the modem route, which seems more and more unlikely,