search for: prism2

What does it take to use either of these chipsets? I can get dongles for either of them very inexpensively on ebay...

...t; command to brctl, the wireless access point that my card is connected to is shown as the root bridge no matter how low I set the bridge priority. If I tell my wireless card to act as the master, the bridge seems to function perfectly. The card I'm using is a D-Link DWL-520 Rev E1 with a Prism2.5 chipset using the HostAP drivers. I read in the FAQ page that some wireless cards cannot act as bridges because they are unable to spoof MAC addresses. I do not believe this to be the case with my card. I am able to change my MAC address without problems by issuing the following command:...

I have a linux AP with prism2 (hostap) wireless nic. I whant to filter traffic that pass betwen clients of the AP, this is layer 2 traffic (802.11) and netfilter does not sees it, at first i think in physdev target, but is for layer2 bridged interfaces, and this is not the case. There is a way to filter layer2 traffic indep...

Hi There . Iam runnig a Freebsd5.0 Access Point with a PCMCIA card PRISM 2.5 chipset 200mw , I have got 32 clients on it but is not working fine, keep crashing and I have lot wi0: timesouts on the screen. I was using with same computer other prism card but prism2 and that card work very well but with a lot lower power and more noise because I need use an Ampl. With The prism2.5 the Access point work so good , we have customers close of 27km, until the wireless card crash and I need restart it . at this moment I tried with the firmaware 1.4.9 and 1.5.6,...

...r the end of the payload in the skb while searching for PORT/PASV commands. If you can reproduce the same problem with the 'string' match (but no ip_nat_ftp) loaded, this would confirm my theory. Without the respective hardware, I am unable to reproduce that problem. As stated before, my prism2/hostap combination was never showing such a problem. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

I have a prism 2.5 firmaware 1.5.6 but I can't make work this in 11Mbps on Freebsd 5.1 but the same card work perfect in Freebsd 5.0 help pls! this is my ifconfig wi0:flags=8947<UP,BROADCAST,DEBUG,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:60:b3:7a:a3:1d media: IEEE 802.11 Wireless Ethernet DS/11Mbps <hostap> (DS/2Mbps <hostap>) status:

Hi, A collegue of mine wants to go wireless at his home. Anyone got any buyer tips for a low-maintenance 54Mb brand/model and Centos? Kind regards Barrie

Hi, I'll need to buy a new wireless card. I need a recommendation for PCMCIA wireless card that simply works with CentOS out of the box. By "works out of the box", I mean that it doesn't need ndis wrapper (or whatever it is called), kernel hacks, or whatever. Thanks

OK What client cards do work? For each of the following: 802.11a 802.11b Media: PCI PCMCIA USB OS: FreeBSD 4.7 Recomendations please Thanks David ----- Original Message ----- From: <john@critchley.biz> To: "vizion communication" <vizion@ixpres.com> Sent: Monday, April 14, 2003 2:04 PM Subject: Re: Annother Wireless network card annother problem > > > > I

Has anyone had any experience with wireless LANs and Asterisk? We have and here are my impressions. We configured an Asterisk in the office as a precaution to see how it would work for our own retail customers. Our office is open space, about 800 sq ft. (20x40 area). We use Snom200 and Grandstream SIP phones. Using the latest Linksys wireless access point (WAP54g) and 3 wireless bridges

hi all... again... i sent this message to general questions but nobody got excited about it. i just installed 6 on my t30 laptop. brand new. when trying dhclient i get: DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 5 this trys 6 times then this shows up: No DHCPOFFERS received. No working leases in present database - sleeping. i run a tcpdump while requesting a lease and for