search for: pre6aa1

mdew:~# tc qdisc add dev imq0 handle 1: root htb default 12 r2q 1 Cannot find device "imq0" mdew:~# lsmod Module Size Used by Not tainted ipt_REDIRECT 728 0 (autoclean) ipt_MARK 728 2 (autoclean) iptable_mangle 2100 1 (autoclean) ipt_REJECT 2712 4 (autoclean) iptable_filter 1672 1 (autoclean)

...t wouldn't be unusual for the packets to reach the destination, but be unable to return to the source, so check the routing tables and follow the path the packets would travel. Hope it helps. -- Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Woody (Linux 2.4.19-pre6aa1) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ,S f)+-L)Y=jyaffvZ_j)fjb?psLmr

Just a quick question... Is there a way to do content based routing (i.e. routing based on a TCP or UDP port) without using iptables, i.e. using the ip command? Thanks Andrew _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

hi all, This is my first message to the group.My name is Anirban Chakraborti and I am with new mexico state university. I have recently built a router using suse linux.I need to turn on IGMP and PIM to allow it do multicasting.How to do that? Secondly I also want to control the rate of the datatransfer from the router''s ethernet interface to the ppp interface. Thanks for the

I''m testing to see how fast A can ping C without losing packets. A -- B -- C B is a dual processor (Intel(R) XEON(TM) CPU 1.80GHz) machine. /proc/stat shows me that all of the work is done by one cpu, the other does nothing. Does anyone have any ideas of why this should be the case and what I can do to change it? I''m hoping I can get higher throughput if both of the

... do not work anymore. Anybody with a hint? I''ve got a fully functional HTB setup and just wanted to replace the kernel from 2.4.17 to 2.4.19. In the end the modified tc binary doesn''t recognize "tc filter add" (yet it does accept qdisc show and recognizes htb...) I''ve downloaded the 2.4.19 from kernel.org, iproute2 (2.4.7), installed the patches

Hi, All, So far, all the applications I have seen for Iptables are focusing on connecting a WAN with one IP address to a LAN and using NAT. My question is if the iptables support multiple IP address on WAN side? If so, how it works (you only have one NIC on WAN side)? Is static NAT (it might not be the right term, I mean a static and permanent connection between WAN IP address and LAN IP address)

Hello Sir, I want some help from you. I have my configuration like this. I have three machines. PC1,PC2,PC3. hub hub PC1--------------------PC2-----------------------PC3 eth0 eth0,eth1 eth0 I want to work my configuration like diffserv. I am generating traffic from PC3 and sending it to PC1 via PC2(as a router)and from

I have a dual-homed firewall. It has 2 Internet connections, provided by different ISPs (each with an associated IP address). The 2 Internet connections are connected to the same physical interface. The 2 Internet connections do NOT have equal bandwidth How do I configure the SNAT/MASQ and ensure sharing of the gateways with the correct ratio of usage and with the correct source IP address? I

Hello, I hope i wont make it too complicated and sorry for my englihs... The company has multiple connections to the internet ADSL + CABLE + XDSL... and i only want to use two for load balancing for now. I have read the HOWTO and i got it up and working it works great but i still have a few questions if anyone could help! the setup is: ADSL on ETH0 and CABLE on ETH1 When i load balance on

...ASCII version of the email seems to include some kind of ASCII-art that depicts the sender''s network. But at least in my email client the drawing seems broken and gives no clues about topology. -- Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Woody (Linux 2.4.19-pre6aa1) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi all, I have a strange setup I am trying to get working. Initally I thought I could set it up by just setting up the correct routes. However after thinking about it I have convinced myself (maybe incorrectly) that I most likely need some sort of advanced NAT/routing setup. Below is a description of the networks involved: Local net (192.168.101.0/24) | | Linux machine eth1