Displaying 5 results from an estimated 5 matches for "pppoe_timeout".
2010 Jan 10
1
ADSL ppp0, persist
...ed for this
interface. I do not want that, as I have load balancing configured and
default route is removed when ppp0 interface disapears.
This is my ifcfg-ppp0 config :
USERCTL=yes
BOOTPROTO=dialup
NAME=DSLppp0
DEVICE=ppp0
TYPE=xDSL
ONBOOT=yes
PIDFILE=/var/run/pppoe-adsl.pid
FIREWALL=NONE
PING=.
PPPOE_TIMEOUT=80
LCP_FAILURE=3
LCP_INTERVAL=20
CLAMPMSS=1412
CONNECT_POLL=6
CONNECT_TIMEOUT=60
DEFROUTE=no
SYNCHRONOUS=no
ETH=eth0
PROVIDER=DSLppp0
USER=O2
PEERDNS=no
DEMAND=no
PERSIST=yes
As you can see, I have PERSIST=yes , which according to documentation
should keep ppp0 interface ON. Well it does but only...
2008 Jul 06
0
PPPoE and IPv6
...tting the its
IPv4 address. Shorewall is doing the forwarding and the static routes
on the internal interface for IPv4 are working.
But no IPv6.
Here is my ifcfg-ppp0:
USERCTL=no
BOOTPROTO=dialup
NAME=DSLppp0
DEVICE=ppp0
TYPE=xDSL
ONBOOT=no
PIDFILE=/var/run/pppoe-adsl.pid
FIREWALL=NONE
PING=.
PPPOE_TIMEOUT=80
LCP_FAILURE=3
LCP_INTERVAL=20
CLAMPMSS=1412
CONNECT_POLL=6
CONNECT_TIMEOUT=60
DEFROUTE=yes
SYNCHRONOUS=no
ETH=eth0
PROVIDER=DSLppp0
USER='me'
PEERDNS=no
DEMAND=no
PERSIST=no
IPV6INIT=yes
Interesting also about the FIREWALL entry. I do have iptables off, as I
am using shorewall that u...
2013 Mar 11
1
/etc/sysconfig/network-scripts/ifcfg-xxx for CHAP PPPoE
Hi all
I get a Cisco 1841 router, connecting the office through a CHAP PPPoE link:
[...]
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname username at isp
ppp chap password 0 s0meStr0ngP4sswd
[...]
As
2007 May 07
2
adsl-setup (compaq presario sr5010nx)
I just bought a new cheap compaq presario sr5010nx and so far have been
unable to get my dsl up and running on Centos5. pppoeconf on Ubuntu
works just fine -- same machine -- same harddrive.
I've run adsl-setup and system-config-network? (separately) numerous
times without success.
So far I suspect a missing driver but suppose it could also be a
detection issue.
Suggestions or workarounds
2013 Feb 11
1
Centos 6 and VLAN-ID7 for vDSL (Telekom)
...hernet
VLAN=yes
with pppoe-setup I've generated /etc/sysconfig/network-scripts/ifcfg-ppp0
cat /etc/sysconfig/network-scripts/ifcfg-ppp0
# generated with pppoe-setup
USERCTL=yes
BOOTPROTO=dialup
NAME=DSLppp0
DEVICE=ppp0
TYPE=xDSL
ONBOOT=yes
PIDFILE=/var/run/pppoe-adsl.pid
FIREWALL=NONE
PING=.
PPPOE_TIMEOUT=80
LCP_FAILURE=3
LCP_INTERVAL=20
CLAMPMSS=1412
CONNECT_POLL=6
CONNECT_TIMEOUT=60
DEFROUTE=yes
SYNCHRONOUS=no
ETH=eth0.7
PROVIDER=DSLppp0
USER=feste-ip/<benutzerkennung>@t-online-com.de
PEERDNS=no
DEMAND=no
/etc/ppp/chap-secret an /etc/ppp/pap_secret hast follewing content:
# Secrets for aut...