search for: ppp2

...y is using ADSL PPPoE connection with dynamic public IP assigned by ISP. My Internet gateway is Redhat AS3 U2, shorewall 2.0.9 As my ISP provided 4 simultaneous pppoe dailup connection for the same physical adsl line. My linux server can be configured for multiple pppoe connection i.e. ppp0, ppp1, ppp2, ppp3 Is it possible of shorewall to assigned say ppp0''s IP is assigned to local 192.168.100.10 ppp1''s IP is assigned to local 192.168.100.11 ppp2''s IP is assigned to local 192.168.100.12 ppp3''s IP is assigned to local 192.168.100.13

...be a solution ? Kind regards, Felix. interfaces: loc eth0 detect tcpflags modem eth1 detect dhcp,tcpflags,routefilter,nosmurfs,arp_filter net ppp0 - tcpflags,routefilter,nosmurfs,arp_filter pptp2 ppp1 - tcpflags,routefilter,nosmurfs,arp_filter pptp3 ppp2 - tcpflags,routefilter,nosmurfs,arp_filter pptp4 ppp3 - tcpflags,routefilter,nosmurfs,arp_filter zones: modem InodeInternal PPTP Connector via 10.0.0.0 loc Local Local networks via 192.168.47.0 net Tunnel1-Internet Inode PPTP Tunnel 1 pptp2 Tunnel2-Int...

...sh 165.165.160.1 dev ppp1 proto kernel scope link src 165.165.163.95 165.165.160.1 dev ppp3 proto kernel scope link src 165.165.187.47 165.165.160.1 dev ppp4 proto kernel scope link src 165.165.170.110 165.165.160.1 dev ppp0 proto kernel scope link src 165.165.179.151 165.165.160.1 dev ppp2 proto kernel scope link src 165.165.189.95 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.1 default nexthop via 165.165.160.1 dev ppp0 weight 1 nexthop via 165.165.160.1 dev ppp1 weight 1 nexthop via 165.165.160.1 dev ppp2 weight 1 nexthop via 165.1...

...rld via 3 dsl lines. I put up a linux box that handles all the dsl lines, lan gateway and all is working well...until...one of the dsl lines goes down. My routing table is: x.x.x.x dev ppp0 proto kernel scope link src x.x.x.x x.x.x.x dev ppp1 proto kernel scope link src x.x.x.x x.x.x.x dev ppp2 proto kernel scope link src x.x.x.x 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1 255.255.255.0/24 dev eth0 scope link 169.254.0.0/16 dev eth0 scope link 127.0.0.0/8 dev lo scope link default equalize nexthop via x.x.x.x dev ppp0 weight 1 nexthop via x.x....

That could have gone smoother. I had many problems with the NFS install on my firewall then once I got the server back up, mail delivery was broken :- ( I still haven''t gotten ulogd to run under RH9.0 but everything else seems to be working ok... -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline, \ http://www.shorewall.net Washington USA \ teastep@shorewall.net

...her one goes up. 3. Routing based on device model (VLAN10 gateway will be ppp0 and in a case of failover it will jump to ppp1 for example) post of my config files: interfaces: #NET net0 ppp0 detect tcpflags,dhcp,routefilter,nosmurfs net1 ppp1 detect tcpflags,dhcp,routefilter,nosmurfs net2 ppp2 detect tcpflags,dhcp,routefilter,nosmurfs net3 ppp3 detect tcpflags,dhcp,routefilter,nosmurfs #WAN wan0 eth0 detect tcpflags,routefilter,nosmurfs wan1 eth1 detect tcpflags,routefilter,nosmurfs wan2 eth2 detect tcpflags,routefilter,nosmurfs wan3 eth3 detect tcpflags,routefilter,nosmurfs dmz...

...) <--> eth1(ip public network), works fine. I make the accounting because y want to control the remote vpn access(pptpd) throught shorewall. Which is the way to control vpn /ip/access in /etc/shorewall/accounting? Is my example correct? and if i have diferents vpn wil be with ppp1, ppp2 .. ? or i have to control throght shorewall zone vpn1,vpn2,... acc1-out:COUNT    account-ip    -    ppp0:192.168.1.100 acc1-in:COUNT    account-ip    ppp0:192.168.1.100    - DONE    acc1 # #acc2-in:COUNT    account-ip    eth0    195.8.169.2 #acc2-out:COUNT    account-ip    195.8.169.2    eth0...

Albi Rebmann wrote: > Hallo, > > sorry to say again, but BindToInterface = interface [experimental] still > does not work here (tinc 1.08). I use SuSE Linux 8.0, 2.4 Kernel. > If I add a missing device I get an error, but I add ppp2 (my external > device) and tinc still listens on 0.0.0.0 > I hope you have an idea how I can bind tinc to only one ip address. Use BindToAddress. Ivo -- Software isn't released, it's allowed to escape. Tinc: Discussion list about the tinc VPN daemon Archive: http:/...

...ing gmane] I used the "Linux Advanced Routing & Traffic Control HOWTO" for doing source routing using iproute2. The documentation would be perfect if the source routing page <url:http://lartc.org/howto/lartc.rpdb.html> mentionned you may have to turn off spoofing protection on ppp2: ----8<----8<----8<----8<---- echo 0 > /proc/sys/net/ipv4/conf/ppp2/rp_filter ---->8---->8---->8---->8---- I was stuck for quite some time with no net and my logs full of: ----8<----8<----8<----8<---- kernel: martian source 42424242 for 42424242, dev ppp0 -...

...hine (more crazyness: even connected to the same nic. it works fine, I swear). this machine will serve this conenction to a local net. so, I setup the ifaces correctly, everything works. I add balancing using this command: # ip route replace default nexthop dev ppp0 nexthop dev ppp1 nexthop dev ppp2 nexthop dev ppp3 I try this downloading a iso image using BT and checking with iptraf. the load gets balanced. fine. then I issue this command to setup masquerading for each ppp line: # for i in 1 2 3 4; do > sudo iptables -t nat -A POSTROUTING -s 172.16.16.0/22 -o ppp$i -j MASQUERADE; &g...

Hi Paul, thanks for your answers. > 3 DSL (ppp0,ppp1,ppp2) providers from the same ISP. (which means they have > the same gateway, but different static ISP''s) Do they actually have the same peer address? The connection is pppoe, the gateway is assigned by the ISP and the 3 ADSL connections next hop is to the same Router at the ISP. The gate...

...-j MARK --set-mark 4 ip rule add fwmark 1 table isp1 ip rule add fwmark 2 table isp2 ip rule add fwmark 3 table isp3 ip rule add fwmark 4 table isp4 ip route add default via $GWIPADDR dev ppp0 table isp1 ip route add default via $GWIPADDR dev ppp1 table isp2 ip route add default via $GWIPADDR dev ppp2 table isp3 ip route add default via $GWIPADDR dev ppp3 table isp4 $PORT1 thru $PORT4 are unique and $GWIPADDR is the same for all 4 ppp links. Using these rules, data going out of my Intel box is shaped nicely based on looking at the transmit columns in /proc/net/dev. On the receive side, all...

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/c...

...u32 port match and that is when specifying a mask. tc filter add prio 1 dev ppp1 parent 2:0 protocol ip u32 match ip dst 0.0.0.0/0 match ip protocol 17 0xff match ip dport 27015 0xffff flowid 2:4 Using 27015 0xffff works just fine, all packets to dport 27015 go to 2:4 tc filter add prio 1 dev ppp2 parent 2:0 protocol ip u32 match ip dst 0.0.0.0/0 match ip protocol 17 0xff match ip dport 27015 0xFFD2 flowid 2:4 Using 27015 0xffd2, no packets go to 2:4. What should happen if my theory below is right is putting ports 27015 - 27050 in 2:4 The way I calculate the mask is: - Convert lowest bo...

....114.103 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 212.179.37.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp6 172.26.255.245 0.0.0.0 255.255.255.255 UH 0 0 0 eth3 212.199.5.226 0.0.0.0 255.255.255.255 UH 0 0 0 ppp2 212.199.17.49 0.0.0.0 255.255.255.255 UH 0 0 0 ppp5 212.25.127.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth1 212.179.61.77 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 212.25.114.89 0.0.0.0 255.255.255.255 UH 0 0...

Hi all iam trying to deploy loadbalance and failover My setup description --Fedora Core 4 --Linux 2.6.12.3 #1 SMP Mon Jul 25 22:37:34 IST 2005 i686 i686 i386 GNU/Linux --tc utility, iproute2-ss050314 --ip utility, iproute2-ss050314 --iptables v1.3.0 And i had deployed Following configuration #table main with priority 50, the highest one ip rule add prio 50 table main #table 201 ip rule add

Hi, I want to be able to specify actions for different classes of traffic in any of these four ways, and I''d like to use only HTB if possible: 1. No guranteed rate, No ceil 2. Guaranteed rate, No ceil 3. No guranteed rate, Ceil specified 4. Guaranteed rate, Ceil specified For types 2, 3 and 4 there can be several classes of each, with different rates and ceilings. 4 is ofcourse easy.

...urfs,logmartians loc eth0 detect tcpflags,detectnets,nosmurfs dmz eth2 detect tcpflags,detectnets,nosmurfs ovpn tun0 detect tcpflags,detectnets,nosmurfs wlan eth3 detect tcpflags,dhcp,detectnets,nosmurfs vpn1 ppp1 detect tcpflags,detectnets,nosmurfs vmn eth4 detect tcpflags,detectnets,nosmurfs l2tp ppp2 - /etc/shorewall/policy ... # Policies für l2tp # l2tp net ACCEPT info l2tp loc ACCEPT info l2tp vmn ACCEPT info l2tp wlan ACCEPT info l2tp dmz REJECT info l2tp $FW REJECT info l2tp all REJECT info loc l2tp ACCEPT info /etc/shorewall/rules ... # Prevent IPSEC bypass by hosts behind a NAT gateway...

Woops... this didn't show up here but it did on BugTraq. Questions answered! -- Chuck Mead, CTO, MoonGroup Consulting, Inc. <http://moongroup.com> Mail problems? Send "s-u-b-s-c-r-i-b-e mailhelp" (no quotes and no hyphens) in the body of a message to mailhelp-request@moongroup.com. Public key available at: wwwkeys.us.pgp.net ----------

...o/samba Return-Path: <brazell@bmh.com> Delivered-To: samba@lists.samba.org Received: from scrappy.bmh.com (scrappy.bmh.com [209.219.216.47]) by lists.samba.org (Postfix) with ESMTP id 4536D55A6 for <samba@lists.samba.org>; Wed, 22 Aug 2001 05:52:18 -0700 (PDT) Received: from rogue (ppp2.bmh.com [209.219.216.112]) by scrappy.bmh.com (8.9.3/8.9.3) with SMTP id IAA24828; Wed, 22 Aug 2001 08:55:45 -0400 Message-ID: <001801c12b21$bfa2b0b0$70d8dbd1@rogue> From: "Natr Brazell" <brazell@bmh.com> To: "Christian Barth" <barth@cck.uni-kl.de>, <samba...