search for: powersure

Hi, I have a Liebert PowerSure Personal XT that I have connected via its USB interface. lsusb shows that it is there and when I plugged in I got the kernel messages: Jul 3 11:25:37 mint kernel: usb 2-2.2: new low speed USB device using address 4 Jul 3 11:25:38 mint kernel: hiddev96: USB HID v1.11 Device [LIEBERT PowerSure P...

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically) ================================================================ Driver: liebert Conn.: Original RS232 cable Starts OK, but fails to detect any events I tried (p...

Hi, I have a Liebert POWERSURE PSP connected via USB. Cleanly built and installed from source nut-2.4.3.tar.gz using kernel 2.6.30.5 #cat /proc/bus/usb T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=10af ProdID=0003 Rev= 0.00 S: Manufacture...

...y ... No problem, take your time, just don't forget to let us know when you get it to work :) > I basically had modified the code as instructed when Murphy hit, but > there seems to still be a snag that needs some debugging to pinpoint: > > # nut-2.1.0b/drivers/newhidups -DD -a PowerSure A common problem is that, even when you run newhidups as the "root" user, it will actually drop root privileges before opening the USB device. To prevent it from dropping them, you must give it the "-u root" option (you can get around this by setting up some hotplugging magic,...

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2...

Hi David As per the link http://www.llondel.org/ups.shtml & the final testing paragraph. I have set up a Lantech UPS similiar to your write up for your Powersure Proactive and Powersure Personal UPS's On LOW BATT it shuts down OK. BUT as with other many UPS's during the wait period from low batt to start of shutdown ... IE [SHUTDOWNCMD "/sbin/shutdown -h +20"] 20 minutes in this case. Reapplying AC power before the 20 minute ma...

Hello, I need help configuring my USB connected UPS "Emerson Power Liebert PowerSure PSI 1440" to my freebsd machine, using NUT. here's the manufacturer's product page http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx I'm not a BSD expert, so please ask me for any information you need. regards Da...

On Apr 3, 2014, at 7:24 AM, Daniele Borghesi wrote: > nothing appens. The output is exactly the same as below (attached screen with freenas config) > What happens without the leading "-x"? (just "productid=0004") The "-x" is what you would add if you were running the driver from the command line. -- Charles Lepple clepple at gmail

...r: nut_upsmon not running? (check /var/db/nut/upsmon.pid). > > > 2014-04-03 2:15 GMT+02:00 Charles Lepple <clepple at gmail.com>: > On Apr 2, 2014, at 9:52 AM, Daniele Borghesi wrote: > > > Hello, I need help configuring my USB connected UPS "Emerson Power Liebert PowerSure PSI 1440" to my freebsd machine, using NUT. > > here's the manufacturer's product page http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx > > > > I'm not a BSD expert, so please ask me for any infor...

...;> /var/db/nut/upsmon.pid). > > > > 2014-04-03 2:15 GMT+02:00 Charles Lepple <clepple at gmail.com>: > >> On Apr 2, 2014, at 9:52 AM, Daniele Borghesi wrote: >> >> > Hello, I need help configuring my USB connected UPS "Emerson Power >> Liebert PowerSure PSI 1440" to my freebsd machine, using NUT. >> > here's the manufacturer's product page >> http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx >> > >> > I'm not a BSD expert, so please...

Nice! it seems to works. Later this evening when I'll be back to my home I'll try to unplug the power chord from my ups. Apr 3 14:08:11 archivio notifier: nut not running? (check > /var/db/nut/upsd.pid). > Apr 3 14:08:11 archivio notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > Apr 3 14:08:11 archivio notifier: nut_upslog not running? (check >

...searched the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS 6.3) to monitor the UPS, but couldn't find a successful configuration. I'm running kernel 2.6.32-279.14.1.el6.x86_64. The UPS is connected with an USB cable: Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x10af Liebert Cor...

...500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x10af Liebert Cor...

Hello everyone, Charles suggested (about a week ago) that I repost to this list. I took a moment to run some additional tests ... The basics: -- UPS: Liebert PowerSure PSA 500 (from the 230 VAC / 50 Hz line) -- Kernel: 2.6.11.5 (from sources), USB support (down to and including CONFIG_USB_HIDDEV) compiled in statically (not as a module) -- Rest of OS: Basically still from the original SuSE 9.1 install :-/ -- Connection: USB cable (as supplied by Liebert) -- N...

Replaced ups with a new Liebert UPS and it seems the device may not be known to nut. Below is output of lsusb: ID 10af:0002 Liebert Corp. PowerSure PST UPS Sent from Outlook<http://aka.ms/weboutlook> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20231204/7c08a727/attachment.htm>

...NUT from 2.0.2 to 2.2.0 and have read the upgrading file, which led me to submitting this message. I have changed nut.conf to use 'driver = usbhid-ups' and 'productid = ffff', but I still get 'No matching HID UPS found' when I try to start the driver. The UPS (a Liebert PowerSure Personal XT 450VA) was working fine with 2.0.2 and the hidups driver. Is there a workaround for this with 2.2.0?

Hi, I have a Liebert Powersure Personal XT 700 and have followed the installation instructions from here http://www.networkupstools.org/doc/2.0.0/INSTALL.html. I'm pretty sure I've got the ups.conf, upsd.conf and ups.users correct. I have setup upsmon.conf as suggested in the installtion guide with the exception of...

...the HAL drivers are installed, hald can fire up the right addon. I've made the necessary change for the above, and also checked for other missing entries (r1041). The only remaining things are (I've not checked the matching driver yet): - Mustek Powermust 600USB (OMRON/87XXUPS) - LIEBERT/PowerSure Personal XT - Cypress Semiconductor USB to Serial - Powercom - unknown driver And I'm still reluctant with Krauler and Ablerex entries (non compliant IDs), though I leaved these in the fdi file for now. Arnaud -- Free Software Developer - http://arnaud.quette.free.fr/ Debian Developer - http...

Since repeated power cuts last week I've been a bit worried about the state of my server. Today it spontaneously rebooted - but failed to complete. Now it isn't recognising me as a user, by the look of it, so I've got some questions before I do something that might make things worse. I can boot as root, and it appears that all my files are present. System-config-user sees me as user

...ial Number: unknown 0.001470 - Bus: 002 0.001475 Trying to match device 0.001481 Device does not match - skipping 0.001488 No appropriate HID device found 0.001496 No matching HID UPS found So far so good [root at aemaeth:/lib/nut]$ lsusb -d 10af:0004 Bus 002 Device 007: ID 10af:0004 Liebert Corp. PowerSure PSI UPS This command indeed goes a little further and tries belkin driver (not really operational tho): [root at aemaeth:/lib/nut]$ ./usbhid-ups -a liebert -x productid=0004 -u root -DD Network UPS Tools - Generic HID driver 0.35 (2.6.0) USB communication driver 0.31 0.000000 debug level is '...