search for: portnumber

Hi all, I have trouble making a tinc daemon on a Windows XP machine behave properly. In order to let the connection go through the (NAT) firewall I need to be able to pinpoint the exact portnumber used, so I can make the proper rewriting rules. However when I don't specify any Port number the firewall receives connection attempt for the other tinc machine on the internet from a "random" high port number (1025 and up, increasing with each attempt). If I *do* specify a Port dir...

At the moment I have 2 network connected in a VPN and I'm planning to extend this. Actual status: Network A has a public IP Network B is behind a provider-scale NAT. Actually I'm using openvpn with a single UDP connection from B to A, and hosts inside Network A can communicate with B. I tried with tinc, and I saw tinc has to go TCP-Only for accomplish this. This is because Tinc

...to take over the failed machine's services. Also the IP adress is moved (the machine will now have multiple IP adresses (on the same logical net)). So what I want to do is to run two SAMBA-servers with diffrent configuration on one machine. Is this possible? Must I run the servers on diffrent portnumbers? If I have to change one of the servers portnumber how do I do with my NT4 clients ?? My clients are configured to access both of the SAMBA-servers and need to do this also in a case of a failure. Suggestions? Regards, Henrik Henrik Ejderholm Phone: + 46 13 23 52 00 Sectra-Imtec AB...

if I: ssh -fND localhost:6000 somebody at 192.168.56.5 -p PORTNUMBER from computer "A" to computer "B" [B = 192.168.56.5] then I can set the SOCKS proxy for e.g.: Firefox to use "localhost:6000" on computer "A". Ok. I can surf the web through "B". But: - Can anyone sniff the traffic of "A"? [e.g.: co...

...t hv_device *Device) DPRINT_INFO(STORVSC, "QUERY_PROPERTIES_OPERATION..."); memset(vstorPacket, 0, sizeof(struct vstor_packet)); - vstorPacket->Operation = VStorOperationQueryProperties; - vstorPacket->Flags = REQUEST_COMPLETION_FLAG; - vstorPacket->StorageChannelProperties.PortNumber = + vstorPacket->operation = VSTOR_OPERATION_QUERY_PROPERTIES; + vstorPacket->flags = REQUEST_COMPLETION_FLAG; + vstorPacket->storage_channel_properties.port_number = storDevice->PortNumber; ret = vmbus_sendpacket(Device->channel, vstorPacket, @@ -290,26 +290,27 @@ static i...

...t hv_device *Device) DPRINT_INFO(STORVSC, "QUERY_PROPERTIES_OPERATION..."); memset(vstorPacket, 0, sizeof(struct vstor_packet)); - vstorPacket->Operation = VStorOperationQueryProperties; - vstorPacket->Flags = REQUEST_COMPLETION_FLAG; - vstorPacket->StorageChannelProperties.PortNumber = + vstorPacket->operation = VSTOR_OPERATION_QUERY_PROPERTIES; + vstorPacket->flags = REQUEST_COMPLETION_FLAG; + vstorPacket->storage_channel_properties.port_number = storDevice->PortNumber; ret = vmbus_sendpacket(Device->channel, vstorPacket, @@ -290,26 +290,27 @@ static i...

...reboot (which is almost never.) On the dom0 server I have to do the following steps: */usr/sbin/xm usb-list-assignable-devices* (get the bus-id of the USB device) */usr/sbin/xm usb-hc-create $Domain 2 2* (Create a USB 2.0 Root Hub with 2 ports in $Domain) */usr/sbin/xm usb-attach $Domain $DevId $PortNumber $BusId* (Attach the USB bus-id found in step 1 to the hub created in step 2) On the domU the lsusb looks like this after the above (before it returns nothing) * mgaca:~ # lsusb Bus 001 Device 002: ID 04e6:5116 SCM Microsystems, Inc. SCR331-LC1 SmartCard Reader Bus 001 Device 001: ID 1d6b:0002 Linu...

...ing else too, though the speed of how the site runs has increased a lot. there is another thing though: I''m using a shared account on textdrive, and there it''s set up with lighttpd. bottom line, you have to setup a proxy in order to see the site at domain.tld instead of domain.tld:portnumber. When the site was running really slow, I didn''t have this proxy setup and probably it took a lot to find out the app or something. what''s the right explanation? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Goo...

hi I know that I could use ssh tunneling: ssh -fND localhost:6000 SOMEBODY at 192.168.56.5 -p PORTNUMBER to surf the web through another machines internet connection -> I just need to set Firefox to use proxy 6000. But: How can I set that on the client side, to e.g.: ping through the machine with openssh-server? Not just setting Firefox to use port 6000. Is there any method for setting the...

It seems that wine broke the ability to connect to a proxy server. Has anyone else noticed this? i.e. after establishing a proxy connection on my linux platform to another server ...... ' ssh -o "ServerAliveInterval 60" -D portnumber user at ipaddress' I used to and ought to be able to connect whilst running metatrader4 Tools -> options -> enable proxy server -> "localhost:portnumber" But is currently broken. I thought it may have been the build of metatrader4, but seems more likely that it is wi...

...basically a vestigial portmap daemon which gets launched before the mount() call and then just records any transactions it gets to a file and sends back an affirmative reply. There are two ways to use it (this belongs in a README file, but it's too late at night right now): a) Set a fixed portnumber in /proc/sys/nfs/nlm_tcpport and /proc/sys/nfs/nlm_udpport before calling nfsmount; once the portmapper starts feed that fixed portnumber to pmap_set(8). In this case the pmap_file can be /dev/null. b) Allow the kernel to bind to any port and use the file produced by nfsroot to feed to pmap_s...

...ring the call there is about 6-7 seconds before audio is heard on either side. When looking at the CLI traces when I answer the incoming call that asterisk extensions were dialing, I see immediately upon answering >0xhexnumber -- Probation passed - setting RTP source address to 192.168.1.11:portnumber then not until about 6 seconds later I see this >0xhexnumber -- Probation passed - setting RTP source address to 192.168.1.11:diffportnumber and immediately hear audio what appears to be an issue is that the RTP link(audio) setup is delayed. Anyone have suggestions on how to fix this issue?...

...ssh -p 2224 fw.somesite.com > ssh -p 2223 fw.somesite.com > ssh -p 2222 fw.somesite.com > Thus, there are different host keys, which leads `ssh' to believe that > the host key has been altered between sessions. > Would it be possible to save both host/IP as well as portnumber as > keys in the 'known_hosts' file? Ciao Christian -- Debian Developer and Quality Assurance Team Member 1024/26CC7853 31E6 A8CA 68FC 284F 7D16 63EC A9E6 67FF 26CC 7853

...e6 3ed8 13ca 2722 1388 0028 4893 8062 b576 0000 7800 6cee c076 19c0 227f a415 aebc d7e5 eab3 e9cf 8ba9 fbb7 c039 So, each UDP package with 20 bytes speex-data, we send: 20 bytes speex 12 bytes ogg headers (and others?) 28 bytes UDP/IP headers (2 IP numerbers, 2 portnumbers, checksum, etc, etc) and, if it goes over the phone, each package has a few ppp headers. <p>Am I overlooking something, or does this fixed frame size mean that the "8kbps" in reality means at least 24kbps? Or is there something ohphone/gnomemeeting/etc can/should do to put more...

...option is still processed in "client.c". I was hoping that there would be a patch available, so I don't have to try to debug it myself. Here again is the description of the problem: ************************************************************ It appears that "smbclient -p <portnumber>" doesn't work as advertised in Samba 2.x. On both Linux 6.2 and Solaris 2.6, independent of firewalls and the like, it works with old Samba (e.g. 1.9.18p10) , but not with new Samba (e.g. 2.0.7). The new version seems to *IGNORE* the port specification and stubbornly attempt to conne...

On Wed, Apr 28, 2010 at 4:19 PM, zerlgi <zerlgi at gmail.com> wrote: > ?Probably the easiest VPN to set up, but not terribly secure, is VTun. > > If you use (horrors) PPTP, then windows already has a client for it. > .. openVPN also has a nice Windows client that can be run as a service > at startup or called on demand. > .. openVPN supports multiple tunnels (one per .cfg

Hi *, What''s the best way to find out on which port mongrel is running from within Rails? I have a cluster of mongrels behind a balancer (Pen) behind a webserver (Apache). In Rails, request.port return 80 and request.env[''SERVER_PORT''] returns 3000 (the port of Pen) Any ideas? Cheers, Max

Joost Witteveen (joost@iliana.nl) wrote: > > So, each UDP package with 20 bytes speex-data, we send: > > 20 bytes speex > 12 bytes ogg headers (and others?) > 28 bytes UDP/IP headers (2 IP numerbers, 2 portnumbers, checksum, etc, etc) > > and, if it goes over the phone, each package has a few ppp headers. > > Am I overlooking something, or does this fixed frame size mean that > the "8kbps" in reality means at least 24kbps? > > Or is there something ohphone/gnomemeeting/etc...

Try a free or paid DDNS service like noip.com ? just remember to port forward to your server address on the lan with the port you use for icecast From: Can Kirca<mailto:cankirca at gmail.com> Sent: Sunday, March 19, 2017 7:08 PM To: icecast at xiph.org<mailto:icecast at xiph.org> Subject: [Icecast] Hello to all Hello to all, My name's Can, I'm a server administrator in a

...+746,36 @@ </group> <group> <attribute name="type"> + <value>spice</value> + </attribute> + <optional> + <attribute name="port"> + <ref name="PortNumber"/> + </attribute> + </optional> + <optional> + <attribute name="tlsPort"> + <ref name="PortNumber"/> + </attribute> + </optional> + <optional&gt...