search for: pingabl

...default gateway defined and the other NIC has an IP on a different subnet with a different gateway on a different VLAN defined. Now when I activate both NICs, and run an ifconfig -a, I see that both IP addresses are showing. Now here is the problem. When I ping the VM, the first NIC's IP is not pingable at all, but the second NIC's IP is pingable. How do I configure the networking so that both IPs are pingable and the VM is reachable via both IPs? Please let me know what I may be doing wrong! Thank you! Sean

Hi, Has anyone met something like this ? dialor*CLI> sip show peers Name/username Host Dyn Nat ACL Port Status 7541/7541 (Unspecified) D 0 UNKNOWN 7540/7540 (Unspecified) D 0 UNKNOWN 7534/7534 (Unspecified) D 0 UNKNOWN 7533/7533 (Unspecified)

...g some hosts on the network, they are all up. Cannot resolve via DNS which is one of the hosts that I cannot ping, internal nor external DNS hosts. Unplugging the NICS and plugging them back in will then not allow pining if the default d=gateway. When cold booting it somewhat works, some hosts are pingable while others are not. When restarting the network service via /etc/init.d/network, nothing is pingable. Here are my configs; ifcfg-bond0 DEVICE=bond0 USERCTL=no BOOTPROTO=none ONBOOT=yes IPADDR=10.0.0.10 NETMASK=255.255.0.0 NETWORK=10.0.0.0 TYPE=Unknown IPV6INIT=no ifcfg-eth0 DEVICE=eth0 BOOTP...

...ge problem that I could not figure out, maybe someone here can lelp. I have a script that uses scp to distribute files to many servers, I use '-o BatchMode=yes -o ConnectTimeout=2 options so the scp will not get stuck if something is wrong with the remote host. If the remote host is down (non-pingable) or sshd is down the timeout option works and the scp continues to the next host in 2 seconds, but if the host is up (pingable) and sshd is listening on port 22 and host is either in trouble e.g. irresponsive then ssh connection hangs and wont every timeout. In that case, I will have to logon to...

...=eth1:1 BOOTPROTO=none PEERDNS=yes GATEWAY=IP.OF.HOST.GATEWAY HWADDR=22:22:22:22:22:22 IPADDR=IP.OF.GUEST.ETH1:1 NETMASK=255.255.255.255 ONBOOT=yes ARP=yes USERCTL=no IPV6INIT=no I get the following error when restarting the network: SIOCADDRT: Network is unreachable and IP.OF.GUEST.ETH1:1 is: - pingable from the same guest - not pingable from other guests by the same provider - not pingable from outside Setting BOOTPROTO=static or commenting out #GATEWAY=IP.OF.HOST.GATEWAY or setting: NETMASK=255.255.255.252 (the IP block was a /30, but I don't think that has something to do here) did not c...

Hi, I had successfully setup my bridge (br0) but after few minutes the br0 interface seems not working. ifconfig eth0 0.0.0.0 ifconfig eth5 0.0.0.0 brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth5 brctl stp br0 on I check on my system's /var/log/syslog file. It shows something strange messages as below: - Jan 2 10:44:22 fw01 kernel: ipt_tcpmss_target: bad length (64 bytes)

...''t do name lookups (service dns/client is enabled, resolv.conf has the nameservers, ipv4-routing and ipv4-forwarding enabled, also ipv6 routing and forwarding enabled on router01 and dmz01). I can set up a route to the static IP that''s assigned to sppp0 on dmz01, and it''s pingable, but the packets go no further : I can''t ping the IP/gateway of the ISP, or the nameservers (nameservers are pingable from dmz01, so they aren''t blocking ICMP). I''m pretty sure that it''s getting "stuck" at the sppp0 device. It''s almost like t...

...:99:in `initialize'' from /usr/lib/ruby/site_ruby/1.8/puppet/network/client/master.rb:203:in `initialize'' from /usr/sbin/puppetd:312:in `new'' from /usr/sbin/puppetd:312 [FAILED] puppet is pingable, so I''m at a loss... sorry for the excess traffic --e Eugene Ventimiglia Director of Systems GridApp Systems e: eventi@gridapp.com o: 646 452 4081 _______________________________________________ Puppet-users mailing list Puppet-users@madstop.com https://mail.madstop.com/mailman/li...

Connecting to proxy.dca.broadvoice.com Calls all of a sudden cannot be completed. Cannot ping proxy.dca.broadvoice.com Changed to proxy.chi.broadvoice.com pingable, but now get the following: Got SIP response 500 "Internal Server Error" back from 147.135.12.128internal error Called Tech Support... get dead air then carrier busy signal. Anyone else having problems? -Mark -------------- next part -------------- An HTML attachment w...

I am having issues with guest OSes running on SLES10 (Sun 4200) hosts. Periodically, the guest OS system drops off the network. From the general network it is not pingable, consequently, ssh fails. If however, I log into the SLES10 server that is hosting the guest OS and ssh to the guest OS, then it becomes immediately pingable and accessible to the rest of the network. Almost like the network on the guest os is sleeping. The guest OSes are configured to have tw...

Just had a box go unresponsive on all services (still pingable) had a session still open to it but any command would result in the error "no more processes" Checks clean for a rootkit and nothing amiss in the logs (that I can find). I have never heard of a bsd box giving this error before, I can't even think of what (other than a hack) would...

A week ago, I tried give realtime priority to asterisk proces using -p switch, asterisk was running inside astcanary, but yestarday asterisk probably starts eating all cpu and lock any access to computer, only ping was possible, so, anybody have experience, that ascanary process does really work to lower process priority in case of overloading? PJ

Hello, Freebsd-stable. I installed 7.1-STABLE on my new Soekris net5501. Kernel config is in attach. This unit lock up in strange way every day. It is pingable, but no access to host on any network protocol (sshd, named, etc are not answering), and serial console (only one this unit has) DOESN'T ANSWER too! Only way to un-freeze it is cold reboot. I've thought, it is overheating problem (before I discovered, that it pingable even when con...

...o matter how many ConnectTos I placed in the tinc.conf(on the client side), only one connection can made to the server, and only one tun0 bring up with is the p2p connection can only go with one server, even though from debug message, I saw to connections all established, but only one connection is pingable. If this is the case, then can I assume the ConnectTo in the tinc.conf is connection by sequence which is a failover machoism, instead of "connect them all"? But multiple netname can do the “connect them all" -- Bright Zhao sent from Gmail -------------- next part --------------...

Hi All, I have three Linux boxes running RH7.2 and each one of these has two 3com Ethernet NICs. I am trying to do some routing stuff with these. Ethernet interfaces on these boxes shut down by its own if I do not pass the packet through them for a while. I am not able to understand why is it happening. One more thing when I use “ip addr show” it shows that interface is there , but ifconfig

I am running Redhat 6.1 as a firewall between a cable modem and my home network. Occasionally, I see messages such as these under /var/log/messages: Jan 17 13:38:16 saturn5 portmap[3726]: connect from 24.28.77.200 to dump(): request from unauthorized host Jan 18 14:00:34 saturn5 portmap[1544]: connect from 204.151.148.146 to dump(): request from unauthorized host My assumption is that the

...ng to benh on IRC, I created the attached patch. nouveau.ko can at least load on PPC64 now. :) However, during X-server start up, the system hard-locks. Since Apple systems don't have a reset button (sigh...), I have to power-cycle the machine. I cannot ssh into the machine, and it's not pingable. It's really toast. I've attached a log with DRM debug messages. The bits about "iommu_alloc failed" seem suspicious to me. I don't have another system with an Nvidia card to test. I'd appreciate it if someone could test this patch on x86 or x86-64 and report results...

Small addition again: This error shows up in the log while removing snapshots WITHOUT rendering the Vms unresponsive — Jun 01 01:33:45 mc-dc3ham-compute-02-live.mc.mcon.net libvirtd[1657]: Timed out during operation: cannot acquire state change lock Jun 01 01:33:45 mc-dc3ham-compute-02-live.mc.mcon.net vdsm[6839]: vdsm vm.Vm ERROR vmId=`56848f4a-cd73-4eda-bf79-7eb80ae569a9`::Error getting block

...e, What is the hypervisor that hosts the VM? What does ifconfig show on it? Boris. On Mon, Nov 7, 2016 at 4:36 PM, Gordon Messmer <gordon.messmer at gmail.com> wrote: > On 11/06/2016 11:00 PM, Sean Son wrote: > >> How do I >> configure the networking so that both IPs are pingable and the VM is >> reachable via both IPs? >> > > > You need one rule file per interface, which directs traffic out the > appropriate interface based on the source address of the packet: > > https://blogs.oracle.com/networking/entry/advance_routing_for_multi_homed >...

...a strange problem here. I have a filesystem with one snapshot that simply refuses to be destroyed. The snapshots just prior to it and just after it were destroyed without problem. While running the zfs destroy command on this particular snapshot, the server becomes more-or-less hung. It''s pingable but will not open a new shell (local or via ssh) however existing shells will occasionally provide some interaction, but at an obscenely slow rate, if at all. Also, since this snapshot is unusually large in size so I''ve allowed the server to chew on it over night without success. It set...