search for: phyad

...odes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: g Wake-on: d Link detected: yes ethtool em2 Settings for em2: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full...

...seT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes But in a xen kernel (in dom0), a lot of the information is not available. # ethtool eth0 Settings for eth0: Link detected: yes How does one get (and se...

My system is: Intel CC820 motherboard (which supports PME# wake up for wake on LAN) 3com 3C905C which also supports wake on LAN via PME# Linux 5.5 The motherboard BIOS is later than one that reports an issue with WOL and this particular network card was fixed. But when I turn off the PC (shutdown or poweroff commands or front panel button), it cannot be restarted via WOL. The network light on

...pports auto-negotiation: Yes     Advertised link modes:  10baseT/Half 10baseT/Full                             100baseT/Half 100baseT/Full                             1000baseT/Half 1000baseT/Full     Advertised auto-negotiation: Yes     Speed: 100Mb/s     Duplex: Full     Port: Twisted Pair     PHYAD: 1     Transceiver: internal     Auto-negotiation: on     Supports Wake-on: g     Wake-on: g     Current message level: 0x000000ff (255)     Link detected: yes Xen Dom0 [root@Server1-FC11 ~]# ethtool eth0 Settings for eth0:     Link detected: yes [root@Server1-FC11 ~]# mii-tool eth0 SIOCGMIIPHY on...

...pports auto-negotiation: Yes     Advertised link modes:  10baseT/Half 10baseT/Full                             100baseT/Half 100baseT/Full                             1000baseT/Half 1000baseT/Full     Advertised auto-negotiation: Yes     Speed: 100Mb/s     Duplex: Full     Port: Twisted Pair     PHYAD: 1     Transceiver: internal     Auto-negotiation: on     Supports Wake-on: g     Wake-on: g     Current message level: 0x000000ff (255)     Link detected: yes Xen Dom0 [root@Server1-FC11 ~]# ethtool eth0 Settings for eth0:     Link detected: yes [root@Server1-FC11 ~]# mii-tool eth0 SIOCGMIIPHY on...

...eT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Half Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: off Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes ethtool says the device has auto-negotiate off and running half duplex. Any attempts to use ethtool to fix it fail. So my biggest fru...

...: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: umbg Wake-on: d Current message level: 0x00000007 (7) Link detected: y ------------------------- -- ------------------------------------------------------------------ Steven C. Ti...

...orts: [ TP ] > Supported link modes: 10000baseT/Full > Supports auto-negotiation: No > Advertised link modes: 10000baseT/Full > Advertised pause frame use: No > Advertised auto-negotiation: No > Speed: Unknown! > Duplex: Unknown! (255) > Port: Twisted Pair > PHYAD: 0 > Transceiver: internal > Auto-negotiation: off > MDI-X: Unknown > Supports Wake-on: g > Wake-on: g > Current message level: 0x00000014 (20) > Link detected: no > > [root at node002 ~]# brctl show > bridge name bridge id STP enabled interfaces > br0 800...

...ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10000baseT/Full Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: Unknown! Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Supports Wake-on: g Wake-on: g Current message level: 0x00000014 (20) Link detected: no [root at node002 ~]# brctl show bridge name bridge id STP enabled interfaces br0 8000.009c02241ae0 no eth1 vnet0 virbr0 8000.52540...

We have an HP DL360 server with dual on-board Tigon3 ethernet cards. We are using eth0, eth1 is unused at the moment. Sometimes when the network interface is under heavy load, for example moving large file transfers over rsync or NFS, the network interface stops working and we lose all connection to the server. The only solution at this point is to jump on the console and restart the network

...gotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes

...1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: No Speed: Unknown! (65535) Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: g and the eth1 link stops working. What could be a problem here? I tried loading both drivers with the parameter for 1000Mbps speed parameters but that didn't help. ( I used on host 1, a...

Hello, Just did a fresh install of xen-4.0 and using the 2.6.31.13 dom0 kernel. I have 6 linux debian guests running, and on my host console i am getting these errors rolling pretty constantly. "Attempting to checksum a non-TCP/UDP packet, dropping a protocol 1 packet" I tried doing the ethtool -K eth0 tx off and same thing on peth0, using bridged mode for network config. Any tips?

Hello, Just did a fresh install of xen-4.0 and using the 2.6.31.13 dom0 kernel. I have 6 linux debian guests running, and on my host console i am getting these errors rolling pretty constantly. "Attempting to checksum a non-TCP/UDP packet, dropping a protocol 1 packet" I tried doing the ethtool -K eth0 tx off and same thing on peth0, using bridged mode for network config. Any tips?

...odes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes And the nic stats also look good: root at comm...

...0baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes -- john r pierce, recycling bits...

...yvpn Settings for myvpn: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Current message level: 0xffffffa1 (-95) drv ifup tx_err tx_queued intr tx_done rx_status pktdata hw wol 0xffff8000 Link detected: yes

...r < 100G. Trying to see if there was a network issue, I tried ethtool on the older box that I'm pulling from, and the relevant lines that surprised me are these: Advertised auto-negotiation: Yes Speed: Unknown! Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Note it's a tg3 driver. mark

...0baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes mpower@dodtsair:~$ sudo /etc/Xen/scripts/network-bridge status ============================================================ 10: peth0:...

anyone know how to force network cards talk at gig speeds when all it wants to do is establish a connection at 100mbits root at host1 [/backup/cpbackup/daily]# mii-tool eth0: negotiated 100baseTx-FD, link ok eth1: negotiated 100baseTx-FD flow-control, link ok 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) Subsystem: Broadcom