search for: petersv

hi all, i am trying to get my TE410P (see previous posts) working in Austria (telekom Austria - i am still waiting for an answer for my questions). my /etc/zaptel.conf looks like -------------------------------- span=1,1,0,ccs,hdb3,crc4,yellow span=2,2,0,ccs,hdb3,crc4,yellow bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 loadzone=at defaultzone=at -------------------------------- after

Hi! I have a runing asterisk box and i want to dial to a analog. pbx using a 4FXS Welltech. Let's say that my pbx have no. 700. If i want to dial to a person in that direction i have to dial pbx prefix (ex. 700), wait for pbx to ansear with hello message and after that to dial internal number(ex. 101). It is possible to dial directly 700101 and asterisk to dial PBX prefix, wait for PBX to

...ng ? How do I debug the Zap channels ? You need to set up debugging in the corresponding conf file for Asterisk. Debugging of the PRI signalling is then set up with pri debug span ??? or pri intense debug span ??? Peter -- Peter Svensson ! Pgp key available by finger, fingerprint: <petersv@psv.nu> ! 8A E9 20 98 C1 FF 43 E3 07 FD B9 0A 80 72 70 AF ------------------------------------------------------------------------ Remember, Luke, your source will be with you... always...

I'm experience echo on outgoing calls: Snom 200 ----> Asterisk ----> T100P ----> PRI ----> called party I am getting echo on the Snom 200 phone. The called party does not hear the echo. Since the PRI is digital, I don't really understand where the echo is coming from. I turned on echotraining, echocancellation=yes (128), and echowhenbridged in zapata.conf, to no avail.

I am using a HFC-S card in nt mode with zaphfc driver to connect an internal isdn bus. I would like to signal an incoming call on, let's say, 4 phones. Right now I use: Dial(Zap/g1/21&Zap/g1/22&Zap/g1/24&Zap/g1/23&Zap/g1/29,,t) where g1 are my two isdn channels provided by HFC-S card an the 21,22,etc my internal numbers. When the command is executed however, only the

Hi. I've searched the archives and found nothing regarding collaborating Asterisk with a Panasonic PBX (TD1232 to be exact) Here's my question: Can I use a Wildcard X100P to connect an outgoing line jack (on the Panasonic) to Asterisk, so I can route calls from the PBX to Asterisk, and calls from Asterisk to the PBX? On the hardware page for the X100P card is says it's great for

Hi: Is DynExtebDB module still working?? -- JO

Hi Just received my spanky new TE405P today to replace my Cisco gateway... After much fiddling (I forgot to switch it to E1) I got it to work and everything "seems" to work perfectly on our ISDN PRI. If I dial-in from the PSTN to a SIP phone, the call goes through and if I hangup either the SIP phone or the remote end, the call gets disconnected and destroyed However, if I dial-in

...mand zttool. Are you sure the cables are correct? Have you set the jumpers on the card to E1 and not left them on T1? I think the leds should turn green when the card senses a correct carrier and framing on the lines. Peter -- Peter Svensson ! Pgp key available by finger, fingerprint: <petersv@psv.nu> ! 8A E9 20 98 C1 FF 43 E3 07 FD B9 0A 80 72 70 AF ------------------------------------------------------------------------ Remember, Luke, your source will be with you... always... --__--__-- Message: 4 From: Holger Schurig <hs4233@mail.mn-solutions.de> To: asterisk-users@l...

Well I'm slowly learning my way around asterisk although as yet I haven't had the chance to actually hook the system up to an ISDN line. I am going to migrate from an Argent Office setup. My only problem is keeping costs down on the phones. The Argent system is running about 30 POTS phones. Can someone suggest the cheapest option? Should I get some kind of large scale FXS box or would

I''m in the process of locking down as much of my systems here as possible as to available ports. I am down to only a handful but am not sure how much of a security risk they pose and was wondering if anyone here might be able to comment, or suggest secure versions to run: 21/FTP (WU-ftpd v2.4.2 BETA 14) 22/SSH (1.22) 23/TELNET (Netkit 0.09) 25/SMTP (Sendmail