search for: perman

On 11/16/2015 01:39 PM, Nick Bright wrote: > This is very frustrating, and not obvious. If --permanent doesn't work > for a command, then it should give an error - not silently fail > without doing anything! But --permanent *did* work. What you're seeing is the documented behavior: --permanent The permanent option --permanent can be used to set options...

...mydomain.example.com mydomain 4. Gotta deal with firewalld. Either uninstall it and use the iptables commands you've fought to finally understand over the years; or, use firewalld and zones, etc. Open all those scary ports to make sure all the complex AD DC components work: firewall-cmd --permanent --add-service=samba firewall-cmd --permanent --add-port=53/tcp firewall-cmd --permanent --add-port=53/udp firewall-cmd --permanent --add-port=88/tcp firewall-cmd --permanent --add-port=88/udp firewall-cmd --permanent --add-port=135/tcp firewall-cmd --permanent --add-port=137/tcp firewall-cmd --p...

Hi everybody, Actually, we know that If we create a dataset in R ,after closing the session the dataset automatically is closed. I tried for creating dataset permanently in R.I am facing the problem of creating permanent dataset. can we create dataset permanently If possible? Could somebody help me out in this aspect,plz? Any help would be appreciated. Thanks in advance. -- View this message in context: http://www.nabble.com/How-to-create-a-permanent-datase...

Hi everybody, Actually, we know that If we create a dataset in R ,after closing the session the dataset automatically is closed. I tried for creating dataset permanently in R.I am facing the problem of creating permanent dataset. can we create dataset permanently If possible? Could somebody help me out in this aspect,plz? Any help would be appreciated. Thanks in advance. -- View this message in context: http://www.nabble.com/How-to-create-a-permanent-datase...

Thanks, Rowland. I'll give it some thought. At this point, I may even go back to slackware or gentoo. It is a bit much learning all the new system tools (systemd, systemctl, firewalld, NetworkManager, etc.) while moving from a samba standalone configuration to AD/DC, DNS, Kerberos, all for the first time. I'm also considering calling Pantek.com - - - I've had some very good

...10208 3 sb_lib,snd,sound psmouse 34308 0 ide_cd 39684 0 cdrom 36768 1 ide_cd genrtc 9864 0 ext3 126856 1 jbd 55188 1 ext3 ide_disk 16512 2 ide_generic 1408 0 [permanent] via82cxxx 12700 0 [permanent] trm290 4228 0 [permanent] triflex 3840 0 [permanent] slc90e66 5888 0 [permanent] sis5513 14856 0 [permanent] siimage 11264 0 [permanent] serverworks 8712 0...

...gt; 4. Gotta deal with firewalld. Either uninstall it and use the iptables > commands you've fought to finally understand over the years; or, use > firewalld and zones, etc. > Open all those scary ports to make sure all the complex AD DC components > work: > > firewall-cmd --permanent --add-service=samba > firewall-cmd --permanent --add-port=53/tcp > firewall-cmd --permanent --add-port=53/udp > firewall-cmd --permanent --add-port=88/tcp > firewall-cmd --permanent --add-port=88/udp > firewall-cmd --permanent --add-port=135/tcp > firewall-cmd --permanent --add...

Hi Everybody, I''m a using xen for my first time in a debian sarge using the testing repository of Xen. I have the following problem: When boot with kernel 2.6.11-ksxen0, after a day or some running, the X crash and then the machine reboots. Will it''s running i''m seeing this erros on dmesg: [drm:i830_wait_ring] *ERROR* space: 131056 wanted 131064 [drm:i830_wait_ring]

...my biggest frustrations with CentOS 7 has been firewalld. >> >> Essentially all of the documentation just flat doesn't work. >> >> One common thing that needs to be done is to change the zone of an > interface, however I've tried: >> >> firewall-cmd --permanent --zone=internal --change-interface=ens192 >> firewall-cmd --permanent --zone=internal --add-interface=ens192 >> >> I've also tried setting in /etc/sysconfig/network-scripts/ifcfg-ens192: >> >> ZONE=internal >> ZONE="internal" >> >> No...

While migrating from mbox to maildir using dsync, I kept running into a brick wall. Some folders would not sync. The message in stderr was: Error message GUID: Mailbox GUIDs are not permanent without index files. This is what solved things for me. I hope this might help someone. Let me know if I'm completely off sides. When working with dsync to migrate from mbox to maildir format mailboxes, I kept running into the error: dsync(someuser): Error: Couldn't get mailbox Drafts...

...ake effect. >> >> If you specify a zone in NM then this will override the firewalld >> configuration if the zone is specified there. >> >> Here's some firewalld stuff: >> https://www.hogarthuk.com/?q=node/9 >> >> Don't forget that if you use --permanent on a command you need to do >> a >> reload for it to read the config from disk and apply it. > Thanks for the articles, they're informative. > > Here's what's really irritating me though. > > firewall-cmd --zone=internal --change-interface=ens224 --permanen...

Hi, I've a set of public mailboxes that all users can access. The index is stored per user, so each user can mark the message as read for themselves. This is with dovecot 1.2.10. However, when selecting the mailbox, system flags are not announced as permanent but only as session flags: 3619 SELECT "public.Admin" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 324 EXISTS * 0 RECENT * OK [UNSEEN 171] First unseen. * OK [UIDVALIDITY 1254326934] UIDs valid * OK [UIDNEXT 1102] Predicted next UID...

Hello, first of all i am not sure wheter this is a correct behavior according to the RFC or not... Problem is, when i set a new custom permanent flag (e.g. testflag) and remove it afterwards, the flag still stays in the list of the permanent flags of this drawer even if there are no messages left with this flag set. So the keyword list gets "polluted" with unused flags. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRA...

Hi, I would like to see this addressed. I found more information on the issue at https://kb.isc.org/article/AA-01183/0/Linux-connection-tracking-and-DNS.html Is there a firewalld solution to this issue? On 04/11/2017 11:05 AM, Chris Adams wrote: > One additional DNS server note: you should disable firewalld for any DNS > server, caching or authoritative. If you need firewalling, use

I'm unable to join my computer to the domain. On the domain controller, initially I only had firewall-cmd --permanent --add-service=samba but that didn't work. The computer couldn't join but when I turned off the firewall all-together I was able to join. I then tried firewall-cmd --permanent --add-service={samba,dns,ldap,ldaps,kerberos,kpasswd} but that didn't work either. Are there some other ser...

I am trying to send a POST request ( ''remove_tag_named'' )and getting a simple OK back on success ; it doesn''t work.. the post is correctly sent , but after then it''s looping on sending a GET request to the same url, with the error 301 Moved Permanently I should not be far fro the solution, but I am stuck : In my routes.rb *namespace :administration* do *resource :dashboards*, :only => :show do collection do *post :remove_tag_named* end end end In my view : *= link_to t(:del...

Hi Earl, >The problem is you added the rule in runtime and when you reloaded it >removed the rule that you added; therefore you need to use --permanent >or >do not reload. Thanks! That worked. [root at appd:~] #firewall-cmd --zone=home --list-ports [root at appd:~] #firewall-cmd --zone=home --add-port=8181/tcp --permanent success [root at appd:~] #firewall-cmd --reload success [root at appd:~] #firewall-cmd --zone=home --list-ports 8181...

This patch adds a flag to mdb entries so that we can distinguish permanent entries with temporary ones. Cc: Stephen Hemminger <shemminger at vyatta.com> Signed-off-by: Cong Wang <amwang at redhat.com> --- bridge/mdb.c | 24 +++++++++++++++--------- include/linux/if_bridge.h | 3 +++ 2 files changed, 18 insertions(+), 9 deletions(-) diff...

...e and R commander we see some packages like car and datasets. In these packages we have default datasets. For example: "Women" and "Prestige" so on. Now we created a "Sales" dataset importing either from excel, xml or text file. Now we are trying to store that dataset permanently in any one of the packages mentioned above (car or datasets). I am able to create them temporarily untill that pirticular session. But once we close the session and try to log into R Console and R Commander. We are not able to find the earlier created datasets "Sales" in the packa...

...y to the route through "route add default gw 10.10.10.10" which is also shown in "route -n" but the problem is that as soon as I restart the network through /etc/init.d/network restart; the route sets to default one...! SO, my question is there any way to save the modified route permanently by hardcoding the changes? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080819/642570c3/attachment-0005.html>