Displaying 14 results from an estimated 14 matches for "perc4".
Did you mean:
perc
2008 Apr 21
1
rejecting I/O to offline device (PERC woes)
Haven't gotten any tips on a solution to the problem below.
It happened again this weekend.
My next test steps (order not determined):
1. Downgrade to CentOS 4
2. Swap out PERC controller with a spare
I have never had a problem with the PERC4/DC controllers on our
other machines (RHEL3/4, CentOS 4). Although, I've no other
machine that has 5 300G Fujitsu SCSI drives either.
Any suggestions on the below, or which order on the above to
try ?
Thanks,
-- Curt
-------------------------------
I have a 6650 with a PERC4/DC running Ce...
2006 Sep 14
4
Compiling Kernel with raid driver for my Dell poweredge 2850 RAID Controler
Hello
I have a problem to boot my xen kernel,
I have a debian sarge 3.1 stable, download xen-3.0.2-src.tgz, extract and
compil it with the command "make world"
But at boot I have an error : "cannot open root filesystem sda1"
My raid controler is a perc4/di raid 5 controler
lspci -v said :
0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller
4 (rev 06)
So I would like to know how to compil my kernel (2.6.16) with raid support ?
Must I have to set y instead of m for these options or for some of these
options :
CONFIG_MEGARAID...
2005 Aug 09
2
Compiling legacy LSI megaraid drivers (Linux 2.6.11) with xen 2.0.7?
Hi all,
I''ve been using Xen for a while and I am trying to install it onto a
Dell Poweredge 2950. The 2850 uses a PERC4/Di raid on motherboard,
which requires the LSI Legacy SCSI Raid driver to be compiled into the
2.6.11-xen0 kernel. I''ve been recompiling the kernel by:
1. Go into the linux-2.6.11-xen0 directory. Select the driver using
"make ARCH=xen menuconfig" and then finding the approp...
2005 Apr 12
6
Centos-4 Kernel pannic
...ecord of what happens. I've included the error messages from the last
time it locked up... but it doesn't really mean much to me. Anybody have
any ideas what might be causing this server lock up?
Server description:
-Dell PE1750 - dual 2.8Ghz Xeon (with Hyper Threading on) - 2GB DDR RAM
- Perc4-DI onboard RAID using 3 scsi drives in raid-5 configuration
-ext3 file system
-kernel-smp-2.6.9-5.0.3.EL
-mysql - from distribution
-2 postfix instances rebuilt with MySQL support
-amavisd-new
-clamav
-spamassassin
-rbldnsd
-bind
Here's the captured output from a serial console connected to t...
2008 Oct 03
2
Slightly OT: Dell Poweredge 2850 with 4GB RAM
Hi all,
I got the previously mentioned Dell Poweredge 2850 with 4GB RAM and Perc4e
raid controller. Installation went well and the raid is pretty fast even with
level 5.
However I have another problem now... CentOS 5.2 only sees 256MB RAM. Googling
a bit, got me to install kernel-PAE, this went well, but CentOS still sees
only 256MB.
Googling some more, I found a bios update w...
2005 Aug 09
1
RE: Compiling legacy LSI megaraid drivers (Linux 2.6.11)with xen 2.0.7?
...8
> To: xen-users@lists.xensource.com
> Subject: [Xen-users] Compiling legacy LSI megaraid drivers
> (Linux 2.6.11)with xen 2.0.7?
>
> Hi all,
>
> I''ve been using Xen for a while and I am trying to
> install it onto a Dell Poweredge 2950. The 2850 uses a
> PERC4/Di raid on motherboard, which requires the LSI Legacy
> SCSI Raid driver to be compiled into the 2.6.11-xen0 kernel.
> I''ve been recompiling the kernel by:
>
> 1. Go into the linux-2.6.11-xen0 directory. Select the
> driver using "make ARCH=xen menuconfig" an...
2009 Feb 11
1
poweredge 1850 won't boot 7.1? maybe LSI-related : amr0: adapter is busy
Hello,
This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge
servers which were running FreeBSD 6.x. It went fine and quickly on the
poweredge 1950, but it failed completely on the poweredge 1850.
Facts:
- boot cd and setup / operation of freebsd 6.x or 7.0 is fine
Message log abstract:
$ uname -v
FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008
2006 Feb 19
1
Help with megaraid_mbox driver
Hi All,
I've built a custom CD based on CentOS 4.2. An OOB CentOS 4.2 disk will
detect the megaraid (Perc4) card in a Dell 1850/2850, and load properly.
My version does not. I have checked, and the original shipping kernel
for CentOS contains the same megaraid_mbox driver as the updated kernel
that is on my CD. Basically, my CD removed some RPMS, and added others
for a custom distro. As far as...
2010 Jul 19
0
prob boot xen-4 2.6.32 megaraid
Hallo,
I have to try install xen-4 on dell pe2850 (Raid: perc4).
booterror: megaraid Couldn''t register IRQ 7!
But megaraid works with linux-2.6.18.8.
Enclosed my tests:
1. Compile xen-4.0 + linux-2.6.32 snapshot (Jeremy) from [8] (test 1).
cd /usr/src/xen-b29254c
make all modules modules_install 2>&1 | tee make.out
cp -p ./arch/x86/boo...
2015 Feb 12
2
test, and H/W
...ntroller installed in it, I don't believe firmware updates will make the
drive usable or extra space visible to the controller.
<snip>
IMPORTANT NOTE! Only the Dell H700 and H800 currently support the 3TB
drives (H200 will add support later this year) - NO earlier controllers,
such as the PERC4/5/6, SAS5/6 (or ANY other Dell controller not mentioned)
have this support and in some cases, even though you may be able to see
the drive, this has NOT been tested or validated, so possible data loss
could be experienced. ONLY use the Dell H700 and H800 with the proper
firmware to ensure a tested...
2011 Nov 29
8
megaraid/PERC
I've got two drives from a now-dead server, they were RAIDed, a mirror,
I'd assume. I need to see if there's anything on them I need to transfer
to the replacement, so I just shoved them into another Dell server, with a
PERC 5 controller - I think that's what the dead one had. I fired up
MegaRAID storage manager... but can't see any way to tell it to recreate
that RAID. Anyone
2004 May 12
6
Dell server for asterisk question!
I am planning to buy Dell 2650 server with dual Xeon processors.
And I would like to buy two TE410P cards for PCI with 3,3v.
This is on Dell site about PCI slots for Dell 2650 server:
3 PCI-X
(1x64-bit/133MHz, and
2x64-bit/100MHz)
Does that mean I will be able to buy two TE410P cards ?
Or I need to buy two TE405P cards ?
Thanks for help.
bartek
2008 Jul 31
17
Can I trust ZFS?
Hey folks,
I guess this is an odd question to be asking here, but I could do with some feedback from anybody who''s actually using ZFS in anger.
I''m about to go live with ZFS in our company on a new fileserver, but I have some real concerns about whether I can really trust ZFS to keep my data alive if things go wrong. This is a big step for us, we''re a 100% windows
2003 Aug 13
6
5.1-R-p2 crashes on SMP with AMI RAID and Intel 1000/Pro
Dear Sirs.
It seems to me a never ending story. We run a box with a TYAN Thunder
2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise
1600 RAID adapter and additional Intel 1000/Pro server type (64 bit)
GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this
state was really hard! It is a story similar to that what happend when
we changed towards FreeBSD