search for: peircing

Hello, I'm wondering if anyone else has been observing problems lately with 1.4.18 and higher releases of asterisk not properly recording calls. When using MixMonitor, the resulting file is only a few bytes long. I think this is because asterisk is doing Native bridging even though MixMonitor should block that. Did something change around the release of 1.4.18 that would have changed

Hello, I just got off the phone with my PRI provider, and was told that I am not sending an expected message when I reject a call with a Cause Code for Unassigned(1) and Congestion (42). Busy works fine though... Anyhow, they are seeing the RELEASE COMPLETE message with cause code 1, however the tech told me they expect a PROGRESS indicator with a value between 1 and 10. Any ideas on how

It seems to never fail - after 3 to 5 minutes SIP -> IAX calls drop audio on one side. I place a call out through voipjet, and call quality is flawless. However a few minutes later the person who I'm talking to can no longer hear me. I can still hear them. What should I look for to resolve this? Has anyone else had this problem? Using last night's CVS this problem still exists.

Hello, I've been playing around with two generic X100P analog cards to create a proof-of-concept system before we go ahead and hook up a PRI. I'm running into a reproducible problem with sound quality of bridged calls, and am hoping someone will be able to point me in the right direction. I have in my dial plan a _9. extension so outgoing calls can be made... the first thing is

test only. good luck! james.zhu -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070807/0fd2b827/attachment.htm

Hello, I know not too long ago I saw /something/ _somewhere_ about an adjustment to call parking that allowed blind transfers from SIP phones to park a call and still be able to hear the parking lot stall number. Unfortunately, I have no idea where I saw that (google turned up little, couldn't find it on the list either). I'm using Sipura SPA-2000 adapters and it doesn't seem to

Hello, I've got my dialplan configured to do a double ring when a customer service call comes in, and a normal ring when an extension is dialed directly. When a customer service call is transferred, I want to ring to revert back to normal. In the local extension macro, I have the following ; make sure ring is set to default exten => s,n,NoOp(${ALERT_INFO}) exten =>

Hi Folks, Apologies to anyone who'd prefer not to see this query on this list; but I'm asking because it is probably the forum where I'm most likely to get a good answer! I'm interested in the provenance of the name "normal distribution" (for what I'd really prefer to call the "Gaussian" distribution). According to Wikipedia, "The name "normal

Has anyone tried using a debit/credit card terminal as such: Terminal <-> SPA-2000 <-> Public Internet <-> * <-> PRI I'm hoping someone will tell me they have done this successfully and rarely experience dropped calls. Though I'd like to hear from anyone who has tried and failed as well. Thanks, Trevor Peirce

Hello all, I would like to rigorously test whether observations in my dataset are outliers. I guess all the main tests in R (Grubbs) impose the assumption of normality. My data is surely not normal, so I would like to use something else. As far as I can tell from wikipedia, Peirce's criterion is just that. The data I am interested in testing is: 1) Continuous on the unit interval 2)

Hello, Has anyone tried the combination of asterisk 1.2.24, zaptel 1.4.5 and HPEC 9.00.003? In particular, with a hardware configuration similar to: Module 0: Installed -- AUTO FXO (FCC mode) Module 1: Installed -- AUTO FXO (FCC mode) Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Not installed Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) I have two fully independent systems

This may not be the right place to ask, but I have an annoying issue with a Sipura/SPA1000-2.0.10(e) ATA device connected to an Asterisk box. (The system is remote to me, so I've only been able to observe this by dialling into a VoIP phone on-site, then run commands on the box remotely!) First of all it's all working fine connected to an Asterisk box and the user can make/take calls

Hi, I am about to buy ip pbx asterisk system but what ip phones do you recommend? Are polycom ip all functional with the ip pbx system??? Be waiting.thanks a lot Marlo -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050811/16cc52cd/attachment.htm

Hello all, I'm going to tackle learning C this week, and start writing my first * add-on/contribution; assuming it's actually worthy of contributing once it's done.. I think I've chosen a hefty project for my first go round here... I'd like to get some feedback from everyone on a FindMe/FollowMe spec I've put together. Before you read on, let me say, I don't want

So I recently developed a collection of bash scripts to run QC programs on the computer my company sells to customers before they ship out. Originally they would run off live cds, but we just made the switch to Live USB sticks for more automation and the benefits of persistence. Right now each of these sticks has syslinux 3.71 installed, and boots up into a custom debian system to auto-run the qc

Hello, I'm writing an AGI script that receives an incoming call, records the caller's name, places an outgoing call and plays the name back then asks if the call should be accepted or sent to voicemail. I know I can use Dial to call another number and bridge the call, but I need a much more advanced solution. It seems I'm missing a Bridge command, or something of that nature,

In my hunt to track down my echo issues, I tried disabling all echo cancellation, suppression, adaption, on my SPA-2000 (Advanced section of the config, under Line 1/2). Then calling from one local extension to another. (SPA-2000 Line1, to Line2 on the same device) I was pretty shocked with the results, the echo was HORRIBLE! I even tried 3 different analog phones. Now, once I turned the echo

Hello, In my quest to create several proof of concepts for what can be done with Asterisk, I've run into a bit of a problem. I have a pair of SPA-2000's acting as off premise extensions for an analog line. When a call waiting call comes in, the caller id information makes it though the ULAW codec and displays on the caller id box, however asterisk doesn't seem to want to pick

Hello, I've got some SIP clients, and an IAX2 long distance provider. Ideally, when a the dialed number is busy I will hear a busy signal. Instead, I get Congestion even though * knows it's busy. Is this a bug or am I missing something? The dial plan, in basically this Dial(IAX2/user@provider/19995551234,,) Goto(failedcall-${DIALSTATUS}) failedcall-CONGESTION plays congestion

I am using Console/DSP for an intercom. I want to play my MP3 collection over it when no one is using it, like when they do in the supermarket. Can anyone help me with this. Any suggestions will be appreciated. -- Christopher Dobbs