Displaying 3 results from an estimated 3 matches for "pd_count".
Did you mean:
pdb_count
2016 Feb 17
1
slightly off-topic, RAID program for on-board SAS 2308-4i ?
...ftware does support these chips in IR mode
The on-board 2308-4i has a RAID-1 set connected, configured in the BIOS
before installing the OS. From dmesg:
**
scsi 0:1:0:0: Direct-Access LSI Logical Volume 3000 PQ: 0 ANSI: 6
scsi 0:1:0:0: RAID1: handle(0x0143), wwid(0x0dafbe8ecd4f4330), pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
**
So, one of these must be true:
1) The machine came from HP with the IR firmware, yet MegaCli64
does not work on the 2308-4i. For the record, it dies because
/dev/megaraid_sas_ioctl_node is not...
2010 Oct 08
1
SCSI/SAS error message by mpt2sas.ko
...pt2sas0: failure at
drivers/scsi/mpt2sas/mpt2sas_scsih.c:4637/_scsih_add_device()!
mpt2sas0: port enable: SUCCESS
Vendor: Dell Model: Virtual Disk Rev: 1028
Type: Direct-Access ANSI SCSI revision: 06
scsi 0:1:0:0: RAID1: handle(0x004f), wwid(0x04adb846d46d5f0a),
pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0),
scsi_level(7), cmd_que(1)
SCSI device sda: 285474816 512-byte hdwr sectors (146163 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write through
SCSI device sda: 285474816 512-byte hd...
2016 Feb 16
3
slightly off-topic, RAID program for on-board SAS 2308-4i ?
Does anyone know what program can be used to query the RAID status
from the OS for an on-board LSI SAS 2308-4i?
On this page:
http://docs.avagotech.com/docs/12351997
there is a curious note on the left that reads:
"Integrated MegaRAID support available upon request"
After one mostly fruitless round of chatting with LSI/Avago/Broadcom
and one completely fruitless round of chatting