Displaying 20 results from an estimated 106 matches for "pci2".
Did you mean:
pci
2003 Apr 06
1
Broken NIC in 4.8 Stable - reposted here as original was in -questions
...steps on my "dev" box all appeared to be OK until I
rebooted when it failed to probe correctly my network card. Below is the
output of my "/var/log/messages file for the old 4.7 working kernel followed
closely by the output from the 4.8 kernel.
4.7
Apr 6 23:02:12 dev /kernel.keep: pci2: <PCI bus> on pcib2
Apr 6 23:02:12 dev /kernel.keep: pci2: <SiS 6326 SVGA controller> at 1.0
Apr 6 23:02:12 dev /kernel.keep: de0: <Digital 21140A Fast Ethernet> port 0xc400-0xc47f mem 0xe5010000-0xe501007f irq 11 at device 5.0 on pci2
Apr 6 23:02:12 dev /kernel.keep: de0: DEC...
2008 Dec 02
2
Freebsd 7 STABLE 200807 amd64 - Realtek 8168 not working
...ef
0000-0xfdefffff irq 16 at device 0.0 on pci3
Dec 2 17:37:21 nas kernel: re0: Unknown H/W revision: 3c400000
Dec 2 17:37:21 nas kernel: device_attach: re0 attach returned 6
Dec 2 17:37:21 nas kernel: pcib7: <ACPI PCI-PCI bridge> irq 18 at
device 28.5 on pci0
Dec 2 17:37:21 nas kernel: pci2: <ACPI PCI bus> on pcib7
Dec 2 17:37:21 nas kernel: re1: <RealTek 8168/8111B PCIe Gigabit
Ethernet> port 0xb800-0xb8ff mem 0xfe4ff000-0xfe4fffff,0xfddf
0000-0xfddfffff irq 17 at device 0.0 on pci2
Dec 2 17:37:21 nas kernel: re1: Unknown H/W revision: 3c400000
Dec 2 17:37:21 nas ker...
2008 Jul 24
2
sparc quota bug
...otdb 552c000-55ac000
pci1 at schizo1
mpi0 at pci1 dev 2 function 0 "Symbios Logic 53c1030" rev 0x08: ivec 0x740
scsibus0 at mpi0: 16 targets, initiator 7
schizo2 at mainbus0: "Tomatillo", version 4, ign 780, bus A 0 to 0
schizo2: dvma map c0000000-dfffffff, iotdb 5694000-5714000
pci2 at schizo2
ebus0 at pci2 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"flashprom" at ebus0 addr 0-fffff, 290-290 not configured
rtc0 at ebus0 addr 70-71: m5819p
pcfiic0 at ebus0 addr 320-321 ivec 0x1b
iic0 at pcfiic0
"SUNW,i2c-imax" at iic0 addr 0xb not configured
&...
2009 Mar 16
1
bge0: EEPROM read timed
Hi.
I got this on today's RELENG_6 with Broadcom BCM5722 A0, ASIC rev. 0xa200.
>From dmesg (bge related):
bge0: <Broadcom BCM5722 A0, ASIC rev. 0xa200> mem
0xe8400000-0xe840ffff irq 16 at device 0.0 on pci2
bge0: firmware handshake timed out, found 0x4b657654
bge0: firmware handshake timed out, found 0x4b657654
bge0: EEPROM read timed out
bge0: failed to read EEPROM
device_attach: bge0 attach returned 6
bge1: <Broadcom BCM5703 B0, ASIC rev. 0x1100> mem
0xe8600000-0xe860ffff irq 21 at device 1.0...
2008 Oct 14
0
Orinoco 802.11b PC Card doesn't work on STABLE
...801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link3: BIOS IRQ 11 for 2.5.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xd0200000-0xd0201fff irq
10 at device 5.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethern...
2009 Jan 06
2
ACPI support?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello All,
I have had a problem detecting the network card on my notebook when ACPI
is enabled for a year. The problem still exists in 7.1-RELEASE.
with ACPI:
...
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002>
irq 17 at device 0.0 on pci8
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't
2003 Aug 11
3
support of SMBus on ICH3
...evice 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xd6800000-0xd68000ff irq 9 at device 5.0 on pci2
rl0: Ethernet address: 00:e0:18:9a:3d:a6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FD...
2009 Jan 22
2
expire plugin error
Hi,
I am using the db backend for the expire plugin and found the following
error message in the logfile:
dovecot: Jan 22 10:10:55 Error: dict: secondary db: unable to allocate
space from the buffer cache
dovecot: Jan 22 10:10:55 Error: dict: Failed to initialize dictionary
'expire'
dovecot: Jan 22 10:10:55 Error: IMAP(xxxxxxxxxx):
read(/var/dovecot/dict-server) failed: Remote
2012 Sep 21
3
tws bug ? (LSI SAS 9750)
...at should be sent
directly to LSI ?
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
LSI 3ware device driver for SAS/SATA storage controllers, version:
10.80.00.003
tws0: <LSI 3ware SAS/SATA Storage Controller> port 0x4000-0x40ff mem
0xc2460000-0xc2463fff,0xc2400000-0xc243ffff irq 17 at device 0.0 on pci2
tws0: Using legacy INTx
panic: _mtx_lock...
2003 Oct 01
0
AC-97 problem between RELENG_4_8 and RELENG_4
...revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:08:0d:05:70:0b
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto...
2005 Jul 31
1
Questions on Asterisk and CallerID
...ul 20 00:50:26 boldsoft kernel: Zapata Telephony Interface Registered
on major 196
Jul 20 00:50:26 boldsoft kernel: ZapTel device: vendor=e159 device=1
subvendor=8085
Jul 20 00:50:26 boldsoft kernel: wcfxo0: <Wildcard X101P> port
0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at device 9.0 on
pci2
Jul 20 00:50:26 boldsoft kernel: ZapTel Attach for wcfxo0: deviceID :
0xe159
Jul 20 00:50:26 boldsoft kernel: wcfxo: DAA mode is 'FCC'
Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
Jul 20 00:50:33 boldsoft kernel...
2005 Aug 02
0
Few questions about Asterisk
...ul 20 00:50:26 boldsoft kernel: Zapata Telephony Interface Registered
on major 196
Jul 20 00:50:26 boldsoft kernel: ZapTel device: vendor=e159 device=1
subvendor=8085
Jul 20 00:50:26 boldsoft kernel: wcfxo0: <Wildcard X101P> port
0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at device 9.0 on
pci2
Jul 20 00:50:26 boldsoft kernel: ZapTel Attach for wcfxo0: deviceID :
0xe159
Jul 20 00:50:26 boldsoft kernel: wcfxo: DAA mode is 'FCC'
Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
Jul 20 00:50:33 boldsoft kernel...
2009 Apr 08
1
watchdog timeout
...to UP
xl1: watchdog timeout
xl1: link state changed to DOWN
xl1: link state changed to UP
---------------------------------------------
xer:/root# cat /var/run/dmesg.boot | grep xl
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem
0xfceffc00-0xfceffc7f irq 23 at device 11.0 on pci2
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:e0:04:1b
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem
0xfceff800-0xfceff87f irq 20 at device 1...
2003 Sep 06
2
TV tuner
Dear All,
Can anyone recommend a TV-tuner card that works well on 4.x or 5.x
Thanks in advance
Regards
Dmitry
2003 Aug 07
0
understanding a panic / crash dump
...thernet address 00:d0:b7:db:69:6a
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
IOAPIC #0 intpin 19 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
pci2: <PCI bus> on pcib2
pci2: <OHCI USB controller> at 0.0 irq 9
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem
0xf1000000-0xf10000ff irq 10 at device 5.0 on pci2
rl0: Ethernet address: 00:50:fc:61:6a:6f
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media inte...
2009 Feb 11
1
poweredge 1850 won't boot 7.1? maybe LSI-related : amr0: adapter is busy
...s fine
Message log abstract:
$ uname -v
FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
$ dmesg|grep amr
amr0: <LSILogic MegaRAID 1.53> mem 0xd80f0000-0xd80fffff,0xdfde0000-0xdfdfffff irq 46 at device 14.0 on pci2
amr0: Using 64-bit DMA
amr0: [ITHREAD]
amr0: delete logical drives supported by controller
amr0: <LSILogic PERC 4e/Si> Firmware 521X, BIOS H430, 256MB RAM
amr0: delete logical drives supported by controller
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 69880MB (14311424...
2006 Mar 22
0
"TIMEOUT - WRITE_DMA" with SiI 3512 SATA on IBM eServer 326
...102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfe000000-0xfe00ffff,0xfe010000-0xfe01ffff irq 24 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-F...
2003 Jun 12
1
NIC has IP, but has "no carrier"
Hello,
My computer is not connecting to the local network with the following
configuration:
dmesg.boot contains the following lines:
-----------------------------------------
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xec00-0xec7f mem
0xfeafbc00-0xfeafbc7f irq 11 at device 12.0 on pci2
vr0: Ethernet address: 00:40:05:a5:00:04
miibus0: <MII bus> on vr0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ifconfig -a reports the following after booting up:
-----------------------------------------
vr0: flags...
2003 Sep 29
3
Frequent reboots...
Hello,
I am having a problem with a new server running FreeBSD 4.9-PRERELEASE.
Once every two days or so, it reboots itself.. there is no exact time of the day it reboots..
It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today).
I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...
2003 Sep 06
1
ATA problems caused by cable or drive?
...18:10 polo /kernel: pci1: <PCI bus> on pcib1
Sep 5 16:18:10 polo /kernel: pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11
Sep 5 16:18:10 polo /kernel: pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
Sep 5 16:18:10 polo /kernel: pci2: <PCI bus> on pcib2
Sep 5 16:18:10 polo /kernel: de0: <Digital 21041 Ethernet> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 3 at device 10.0 on pci2
Sep 5 16:18:10 polo /kernel: de0: SMC 21041 [10Mb/s] pass 1.1
Sep 5 16:18:10 polo /kernel: de0: address 00:00:c0:e6:7d:cf
Sep 5 16...