search for: pbd

Any troubleshooting steps I can follow to get this SR attached again? Has anyone seen this error before? xe pbd-plug uuid=b804d322-c501-6b59-fb7e-b6612042535c There was an SR backend failure. status: non-zero exit stdout: stderr: Traceback (most recent call last): File "/opt/xensource/sm/LVMSR", line 1446, in ? SRCommand.run(LVHDSR, DRIVER_INFO) File "/opt/xensource/sm/SRCommand.py&quo...

Package: xcp-storage-managers Version: 0.1.1-3 Severity: normal XCP cannot use iscsi block devices. Fails with iscsiadm: No active sessions. I ran the following commands trying to diagnose the problem: First introducing a SR and then creating a PBD with the needed configuration for the iscsi block device. These steps work fine but when I tried to plug the PBD I got the error: root at xcpcompute1:~# SR_UUID=$(uuidgen) root at xcpcompute1:~# SR_NAME_LABEL="Test-${SR_UUID}" root at xcpcompute1:~# xe sr-introduce name-label=${SR_NAME_L...

Hi to everyone ! I''m new here, so this is my first post. I''m playing around with Xen Server on an Ubuntu server installation using LVM as its main disk management framework. Well it''s an installation option to do so ... (maybe that wasn''t a good idea to choose in the first place...) Now... Of course I came to the point where I needed an SR. Following some

...ocalhost::Backup/Address Book/" building file list ... done sent 66 bytes received 16 bytes 164.00 bytes/sec total size is 719936 speedup is 8779.71 Executing: rsync.exe -v -rlt --delete "/cygdrive/C/GRIP32/" "localhost::Backup/GRIP32/" building file list ... done Pbd/ Pbd/Events.dat rsync: writefd_unbuffered failed to write 4 bytes: phase "unknown" [sender]: Connection reset by peer (104) rsync: read error: Connection reset by peer (104) rsync error: error in rsync protocol data stream (code 12) at /home/lapo/packaging/tmp/rsync-2.6.6/io.c(584) Er...

...in being created. If we know our configuration going into domain creation (as we should) such that the backend is, say /dev/sda1 and we want this to ultimately be visible as /dev/hda on the guest - how would I go about this? I can see that the relationship in the API is such that a host contains PBD''s (Phys. Bock Devs) PBD''s contain SR''s (Storage Repos) SR''s contain VDI''s ((Virtual Disk Image) and the VDI is what the VM ultimately sees as its disk. Should I be looking up all PBD''s from the host, and comparing it''s name with my co...

Package: xen-utils-3.2-1 Severity: important Hello! When using xenapi.PBD.create() the following error occurs: xen.xm.XenAPI.Failure: Internal error: global name 'genuuid' is not defined. (Attached you can find the logging of the remote host.) This (and other syntax errors) are already fixed in the xen-unstable.hg (see http://xenbits.xensource.com/xen-unstable.h...

...ilt my first Xen box using a 2, 1TB drives in a raid configuration, 2TB total. I installed Xen, I am able to access it via XenCenter. However, I am trying to use some of that 2TB as a local datastore but for the life of me I cannot get it mounted, I keep on getting this error: [root@xen1 dev]# xe pbd-plug uuid=6f3aa3c9-cd9e-adc6-c164-00655e6fe154 The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: Failure("Storage_access failed with: SR_BACKEND_FAILURE_47: [ ; The SR is not available [opterr=no s...

...shows that the VBD is not "currently-attached". I''m somewhat perplexed now as to what the issue might be. I''ve included the dumps for all the relevant objects at the end of the mail (last bits of the SMlog, short listing of VM object, long listing of VBD, VDI, SR, and PBD objects, the output of "tap-ctl list", and the mounts in dom0) Thanks for any help. Cheers. -kannan Relevant info: The SMlog has the following at its tail: [3973] 2011-04-15 13:44:04.806595 [''/usr/sbin/tap-ctl'', ''list'', ''-m'', '...

...and it can call into Asterisk. Am I barking up the wrong tree, and does the device have to be different for it to work in Brazil, or is there some magic I need to apply to the Sipura config to make it work? Any previous experience shared would be welcomed, and eventually, published on the wiki. -pbd -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051005/d4c79703/attachment.htm

...all! I''ve just made the jump from standalone Xen to Xen Cloud Platform. I''ve been impressed with everything about XCP except trying to get an NFS SR to work. Backend system is FreeBSD with an NFSv3 server. I can create the SR and XCP creates it on the NFS server but the PBD will not plug and leaves the SR unusable. xe pbd-plug gives a return code of 32, which I Google as a permissions problem, however I can mount the share from the command line without a hitch. I''m open to suggestions :) Vern -- Vern Burke SwiftWater Telecom http://www.swiftwaterte...

...a what they'd be called there) to an Asterisk box. Is digium's TDM400 series availble down there? Recommended? Undesirable? ATA's? (Sipura, presumably) - channel banks? If anyone has any solid knowledge they can share- gotchas appreciated- feel free to contact me off list. Thanks, -pbd

Hello, I hope to be in the right list. my question is the following. I can''t seem to get multipathing configure on XCP 1.6. In XenCenter I was able to enable "Multipath" however, in the LUN under general tab I see " multipath 1 of 1 active", the the CLI I do the following command xe --m node session it list only one session. Can someone help me please? Thanks in

Package: xcp-squeezed Version: 1.3.2-9 Severity: important When trying to start a guest I get: # xe vm-start name-label=squeeze-2 The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: Failure("The ballooning daemon is not running") If I then manually run "/etc/init.d/xcp-squeezed

...15193 406bf998 0x406bf8e0: 00000000 14041001 140097b1 00000000 0x406bf8f0: 1404102c 00000000 403daff8 403db004 0x406bf900: 00000000 00000000 403e4270 401adcf4 0200: sel=1007 base=40018000 limit=00001fff 32-bit rw- Backtrace: =>1 0x17015778 ?AddAllow@ProfileAddrFilter@@QAEXPAVIInternetAddress@@PBD@Z+0x618 in ssh2client31 (0x17015778) 0x17015778 ?AddAllow@ProfileAddrFilter@@QAEXPAVIInternetAddress@@PBD@Z+0x618 in ssh2client31: movl 0x0(%eax),%edx Modules: Module Address Debug info Name (93 modules) PE 0x00400000-005c3000 Deferred securecrt PE...

...have as many version-related changes, but it's definitely quirky. And I strongly recommend use of a stable gatekeeper- some versions of gnuGK don't hold up to stress well in this type of use. I'm happy to discuss how I'm doing it, and work with you to get a stable configuration. -pbd -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060406/577043bb/attachment.htm

Hello I like to make calls to an h.323 device. I'm using Nuphone h323. Compiled everything okay "I Guess" When I make a connection * SIP > h323 device, the phone is ringing and then * tells me "No one available....." and disconnect Thinking this is a codec problem and check in CLI h.323 show codecs and * shows nothing. I try many combination in the h323.conf like.

Hi, Where can I find information on H.323 for Asterisk and/or integration with Cisco CallManager in particular? <http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration> I have oh323 working on Asterisk. Since the CallManger I am working with is running 3.3.3 I cannot use SIP... Thanks, Adi

Thanks to OvermindDL1 for pointing this out: compiling with Visual C++ actually works! Basically it's just a matter of running cmake (default settings are fine) then nmake, and I've got what appears to be a working version of LLVM. Kaleidoscope crashes on attempting to exit with ^Z: C:\llvm\bin>Kaleidoscope.exe ready> 1+2; ready> Evaluated to 3.000000 ready> 3*4; ready>

I'm trying to get the Kaleidoscope tutorial mini compiler working on Windows (as a trial run for developing a compiler using LLVM). Kaleidoscope uses the C++ linkage method of code generation (as opposed to spitting out intermediate code in a text or binary file), which as I understand it is the preferred way of doing it for a few reasons, one of them being that it gives you JIT capability,

I need to pick all the Asterisk and Cisco People a little. My company has a Cisco Call Manager 3.3, configured via h323 gateways. I have remote users that I want to place a SIP Server on the external WAN and be able to connect their phones to the system and be able to get calls and call people in the office going through the Cisco Call Manager and the h323 router. My only problem is that Cisco