search for: p1_net

...xpr $VALOR_IP + 1) done ip route add 192.168.33.0/24 via 10.1.2.1 dev eth1 src 10.1.2.2 ip route add 192.168.33.0/24 via 10.1.2.1 dev eth1 src 10.1.2.2table T1 ip route add 192.168.33.0/24 via 10.1.2.1 dev eth1 src 10.1.2.2table T2 } IP1=xxx.xxx.xxx.18 IF1=eth0 P1_NET=xxx.xxx.xxx.16/30 P1=xxx.xxx.xxx.17 IP2=192.168.254.250 IF2=eth2 P2_NET=192.168.254.248/29 P2=192.168.254.254 ip route add $P1_NET dev $IF1 src $IP1 table T1 ip route add default via $P1 table T1 ip route add $P2_NET dev $IF2 src $IP2 table T2 ip route add default via $P2 table T2 ip route ad...

..., and I saw the "MASQUERADE: Route sent us somewhere else." error. googling for that, I see lots of suggestions to use connmark, but no examples of how connmark and the multiple link stuff interact. Does anyone have a pointer? The rules I''m using are roughly: /sbin/ip route add P1_NET dev IF1 src IP1 table 201 /sbin/ip route add default via P1 table 201 /sbin/ip route add P1_NET dev IF1 src IP1 /sbin/ip route add 127.0.0.0/8 dev lo table 201 /sbin/ip rule add from IP1 table 201 /sbin/ip route add P2_NET dev IF2 src IP2 table 202 /sbin/ip route add default via P2 table 202 /sbin/...

...ent PCs. Do you have any idea why does it take so long to start navigating and why sometimes it works and sometimes doesn´t. This is the current script running in my server: #================================================= P0_NET=10.0.1.0/24 IF0=eth1 IP0=10.0.1.1 IF1=eth0 IP1=xxx.xxx.xxx.7 P1_NET=xxx.xxx.xxx.0/24 P1=xxx.xxx.xxx.1 IF2=eth2 IP2=yyy.yyy.yyy.21 P2_NET=yyy.yyy.yyy.0/24 P2=yyy.yyy.yyy.1 echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter echo 0 > /proc/sys/net/ipv4/conf/eth2/rp_filter echo 3 > /proc/sys/net/ipv4/route/gc_elasticity echo 1 > /proc/sys/net/ipv4/route/gc_...

...are inferring one router - if I had two routers, one connected to each of the two providers, are those setup commands applicable, by changing the destination values to be the internet Ethernet interface of the other router for the other link? Eg: Router 1 - Provider 1: ip route add $P1_NET dev $IF1 src $IP1 table T1 ip route add default via $P1 table T1 ip route add $P2_NET gw $RTR2 src $IP2 table T2 ip route add default via $P1 ip rule add from $IP1 table T1 ip rule add from $IP2 table T2 ip route add default scope glob...

...n server 2. Main Server --> Client ; Main server -> small server 3. Client -> small server The problem is, when connection 1. use different uplink then connection 2. Those icq related rules below corrected the problem. My script: IF0=eth2 IF1=eth1 IF2=eth3 IF3=eth0 P0_NET=192.168.1.0/24 P1_NET=public1 P2_NET=public2 IP0=192.168.1.254 IP1=publicip1 IP2=publicip1 #gateway P1=publicgw1 P2=publicgw2 #table T1=211 T2=212 T3=222 IP=/sbin/ip # Delete everything #$IP route flush cache $IP route flush all $IP route flush all table $T1 $IP route flush all table $T2 $IP route flush all table $...

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip route add $P2_NET dev $IF2 src $IP2 table $TABLE2 ip route...

...ike. The ip route outputs below show a third nexthop to the 70.25.176.129 address but I only have that currently running as a test of outputing to all three ISP connections. Kirk #!/bin/bash IF0=eth0 IP0=10.10.10.1 P0=70.25.176.129 P0_NET=10.10.10.0 IF1=eth1 IP1=70.25.176.154 P1=70.25.176.129 P1_NET=70.25.176.128 IF2=ppp0 IP2=209.213.232.127 P2=209.183.132.10 P2_NET=209.0.0.0 IF3=ppp1 IP3=69.63.33.227 P3=209.183.132.10 P3_NET=209.0.0.0 #ip route add $P0_NET dev $IF0 src $IP0 table 50 #ip route add default via $P0 table 50 #ip route add $P1_NET dev $IF1 table 50 #ip route add $P2_NET d...

...Internet access through the eth0 interface and the other half through the tun0 interface. I''ve set up a script like the "load balancing split access" instructions in the lartc howto, but it doesn''t work. Here''s the important part of the script: ip route add $P1_NET dev $IF1 src $IP1 table T1 ip route add default via $P1 table T1 ip route add $P2_NET dev $IF2 src $IP2 table T2 ip route add default via $P2 table T2 ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 ip rule add from $IP1 table T1 ip rule add from $IP2 t...

...ytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=128 time=0.726 ms root@enrutizador:~# ping 192.168.254.254 PING 192.168.254.254 (192.168.254.254) 56(84) bytes of data. 64 bytes from 192.168.254.254: icmp_seq=1 ttl=255 time=0.802 ms And here is the script I use to do it work... #!/bin/sh P1_NET=192.168.1.0/24 IF1=eth1 IP1=192.168.1.128 P1=192.168.1.1 P2_NET=192.168.254.0/24 IF2=eth2 IP2=192.168.254.128 P2=192.168.254.254 ip addr add $IP1/24 brd + dev $IF1 ip addr add $IP2/24 brd + dev $IF2 ip link set $IF1 up ip link set $IF2 up ip route add $P1_NET dev $IF1 src $IP1 table T1 ip route...

...lso not quite sure how the nat 0 works in the ip rule statement so yes I am confused in a big way! I will include my policy route script below so you can see the bit I do have working. Any help or pointers will certainly be appreciated. Kirk #!/bin/bash IF1=eth0 IP1=10.10.10.15 P1=10.10.10.1 P1_NET=10.10.10.0 IF2=ppp0 IP2=69.63.33.227 P2=209.183.132.10 P2_NET=69.0.0.0 ip route add $P1_NET dev $IF1 src $IP1 table T1 ip route add default via $P1 table T1 ip route add $P2_NET dev $IF2 table T1 ip route add 127.0.0.0/8 dev lo table T1 ip route add $P2_NET dev $IF2 src $IP2 table T2 ip rou...

...+++++++ # Script criado por NATANIEL KLUG #------------------------- # #---- # Variaveis de sistema #---- IPTABLES="/usr/local/sbin/iptables" IP="/sbin/ip" # #---- # ENTRADA DE LINKS #---- IF1=''eth0'' IF2=''eth0'' # #---- # Declara as redes #---- P1_NET=172.30.0.0/24'' P2_NET=''10.1.1.0/24'' # #---- # Declara IPs #---- IP1=''172.30.0.55'' IP2=''10.1.1.10'' # #---- # Declara gateway das conexoes #---- P1=''172.30.0.1'' P2=''10.1.1.1'' # #---- # Mascara as redes...

...ent PCs. Do you have any idea why does it take so long to start navigating and why sometimes it works and sometimes doesn´t. This is the current script running in my server: #================================================= P0_NET=10.0.1.0/24 IF0=eth1 IP0=10.0.1.1 IF1=eth0 IP1=xxx.xxx.xxx.7 P1_NET=xxx.xxx.xxx.0/24 P1=xxx.xxx.xxx.1 IF2=eth2 IP2=yyy.yyy.yyy.21 P2_NET=yyy.yyy.yyy.0/24 P2=yyy.yyy.yyy.1 echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter echo 0 > /proc/sys/net/ipv4/conf/eth2/rp_filter echo 3 > /proc/sys/net/ipv4/route/gc_elasticity echo 1 > /proc/sys/net/ipv4/route/gc_...

...ent PCs. Do you have any idea why does it take so long to start navigating and why sometimes it works and sometimes doesn´t. This is the current script running in my server: #================================================= P0_NET=10.0.1.0/24 IF0=eth1 IP0=10.0.1.1 IF1=eth0 IP1=xxx.xxx.xxx.7 P1_NET=xxx.xxx.xxx.0/24 P1=xxx.xxx.xxx.1 IF2=eth2 IP2=yyy.yyy.yyy.21 P2_NET=yyy.yyy.yyy.0/24 P2=yyy.yyy.yyy.1 echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter echo 0 > /proc/sys/net/ipv4/conf/eth2/rp_filter echo 3 > /proc/sys/net/ipv4/route/gc_elasticity echo 1 > /proc/sys/net/ipv4/route/gc_...

Hi, Very sorry for my poor Enlgish because I''m not a native speaker. I had read the lartc HOWTO and ip-cref very hard but puzzled by those commands in lartc, 4.2.1. Split access. They are (only xx1 listed): ip route add $P1_NET dev $IF1 src $IP1 table T1 ip route add default via $P1 table T1 ip route add $P1_NET dev $IF1 src $IP1 ip route add default via $P1 ip rule add from $IP1 table T1 I think here "ip rule add from $IP1 table T1" means, the IP package which source address is $IP1 will be passed to table T1....

..., tunnel0 works flawlessly. I used Debian Stable with kernel 2.4.20 Freeswan: 1.98b The setup for the advanced routing looks like this: - -snip- #!/bin/sh function ip { echo ip "$@" /sbin/ip "$@" } [ "$DEBUG" != "1" ] && unset ip # P1 Gateway, P1_NET Network address, IP1 local address, IF1 interfac e export IF1=eth0 export IP1=212.202.224.34 export P1=212.202.224.33 export P1_NET=212.202.224.32/29 export IF2=eth2 export IP2=83.236.132.166 export P2=83.236.132.165 export P2_NET=83.236.132.164/30 if [ "$1" == "start" ]; then...

hi all, we were trying to configure our system with 2 ethernet catds connected to two different providers using iproute2 so that it recieves and transmits data from both of them. We have followed the configuration as given on lartc''s howto But the most wierd part of the story is that after we restart the system (We have put the script in rc.local) the system works fine and we can ping

...the ppp config, but it hasn''t worked. I need to run connection specific scripts as I have other ppp''s going up & down which aren''t related. The routing script starts as follows... #!/bin/sh ## ip route multi path configuration script ## Provider 1 (SWIFTEL)network P1_NET="202.154.xxx.0/24" ## Provider 2(NTT) network P2_NET="202.53.xxx.xxx/30" ## Provider 2 alias network P2_ALIAS_NET="xxx.xxx.xxx.xxx/30" ## Interface for Provider 1 IF1="ppp0" ## Interface for Provider 2 IF2="eth1" ## Static IP Address of provider 1 c...

...Balanceamento de carga entre pontos de rede #------------------------- #---- # Variaveis de sistema #---- IPTABLES="/usr/local/sbin/iptables" IP="/sbin/ip" # #---- # ENTRADA DE LINKS #---- IF1=''eth0'' IF2=''eth3'' # #---- # Declara as redes #---- P1_NET=''200.163.208.0/25'' P2_NET=''10.1.1.0/24'' # #---- # Declara IPs #---- IP1=''200.163.208.6'' IP2=''10.1.1.10'' # #---- # Declara gateway das conexoes #---- P1=''200.163.208.1'' P2=''10.1.1.1'' # #---- #...

...Router/Modem IP (Gateway) P3=10.254.10.10 #Sattelite 3 Router/Modem IP (Gateway) P4=10.254.16.10 #Sattelite 4 Router/Modem IP (Gateway) P5=10.254.17.10 #Sattelite 5 Router/Modem IP (Gateway) P6=10.254.18.10 #Sattelite 6 Router/Modem IP (Gateway) #Networks P0_NET="10.10.1.0/24" # BBSM Net P1_NET=10.254.7.0/24 #Satellite 1 Network P2_NET=10.254.9.0/24 #Satellite 2 Network P3_NET=10.254.10.0/24 #Satellite 3 Network P4_NET=10.254.16.0/24 #Satellite 4 Network P5_NET=10.254.17.0/24 #Satellite 5 Network P6_NET=10.254.18.0/24 #Satellite 6 Network #Perform Network Address Translation for this net...

i´ve been searching for a load balance solution since a month ago... what i can say is that it simply doesn´t work. I was unable to find one guy that did it with sucess. When "load balance" is the subject of the message on the list, the message is simply ignored. So... if it doesn´t work... why LARTC don´t delete it from the HOW TO and answer us with some "it simply doesn´t