search for: ospfv3

Hi Michael, when I was looking for information on tinc in combination with IPv6, I also found your new tutorial at that time (earlier this month). Somehow a couple of things are less clear to me in the newer tutorial (maybe the nice network topology image is missing). OK, you added the unique local addresses to the setup. But I dont't get it how the routing is done in your setup. You

The same client was used for syslinux.efi (both success on same subnet and failure on different subnet) and grub.efi. The DHCP host block is setup like: host testing { hardware ethernet {mac} ; next-server 10.16.195.178 ; filename "rhel64/syslinux.efi" ; } I'll pull a tcpdump filtering by the IP tomorrow when I get back to the systems. On Mon, Nov 4, 2013 at 6:41 PM,

...using 6.01 by mistake. Please let me know if any more information would be helpful. Thanks all your help. mirrored-port# tcpdump -i eth0 -vv 09:52:52.687565 IP6 (hlim 1, next-header OSPF (89) payload length: 36) fe80::a17:f4ff:fe62:631f > ff02::5: OSPFv3-hello 36: rtrid 2.2.2.2 backbone V6/E/R ifid 0.0.0.32 pri 1 int 10 dead 40 dr 2.2.2.2 nbrs 09:52:58.795974 IP (tos 0xc0, ttl 1, id 57703, offset 0, flags [none], proto OSPF (89), length 64) 10.16.233.1 > 224.0.0.5: OSPFv2, Hello, length: 44 <snip/>

...se > let me know if any more > information would be helpful. Thanks all your help. > > mirrored-port# tcpdump -i eth0 -vv > 09:52:52.687565 IP6 (hlim 1, next-header OSPF (89) payload length: 36) > fe80::a17:f4ff:fe62:631f > ff02::5: OSPFv3-hello 36: rtrid 2.2.2.2 backbone > V6/E/R ifid 0.0.0.32 pri 1 int 10 dead 40 dr 2.2.2.2 nbrs > 09:52:58.795974 IP (tos 0xc0, ttl 1, id 57703, offset 0, flags [none], > proto OSPF (89), length 64) 10.16.233.1 > 224.0.0.5: OSPFv2, Hello, > length: 44 > <snip/> > ___________...