search for: onduleurs

Hello, I forgot nut since more than a year because a lot of job with other application My server nut failed since severals months We had 3 electric failure so I must install a new server nut I work with ubuntu 10.04.4 (64bits) / I installed nut 2.4.3 with deposits I have a MGE Pulsar evolution 2200 connected on usb last week when I began my tests all was ok (communication etc etc ..)

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

...> supports delayed start after power return. Here is the model I use : https://www.eaton.com/fr/fr-fr/skuPage.EL1600USBFR.html The web page is in french since I use the french model, but you will see the technical data. I bought these UPS units reference EL1600USBFR from my local supplier onduleurs.fr : http://onduleurs.fr/product_info.php?cPath=123_483_397&products_id=3689/Onduleur-Off-Line-Eaton-Ellipse-ECO-1600-USB-FR-EL1600USBFR-EL1600USBFR.html Best Regards, Roger

Hi, I have the Eaton 5E850iUSBDIN UPS connected via USB to a Raspberry Pi 3B+. It seems that everything but the ondelay parameter works so far. when I test the setup with this command: upsmon -c fsd The NUT server makes the NUT clients shut down properly and the Raspberry Pi running the NUT server shuts down correctly too. The problem is that after UPS shuts down, it immediatelly brings the

My UPS is a Eaton Ellipse 1000S (But its identified as MGE Ellipse 0463:ffff). I have been using the usb interface with the usbhid-ups driver, but I found that sometimes (too much times) the driver doesn't respond and NUT doesn't receive changes nor notifications from the UPS. The kernel lose the connections with USB device, in the kernel logs appears: Dec 30 11:24:12 rei kernel:

Hello, I can't make a brand new APC SmartUPS 1000 (REF SMT1000I) communicate with a ubuntu 8.04 server via usb port. NUT version 2.2.1 seems to be the last on ubuntu 8.04 Could you help me please ? Thanks Herv? Mazzilli ----------------------------------------------------------------------------------------------- root at myserver: lsusb -vvv --> Protocol spec without prior Class and

Hi everybody, I recently bought a UPS Cyber Power DX600E ad I'm trying to manage it through Nut under FreeBSD. Unfortunately, usbhid-ups returns an error when I do: [root at berkelium /usr/local/etc/nut]# /usr/local/libexec/nut/usbhid-ups -u root -DD -a onduleur Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '2'

Hi all :) Using lm_sensors, I can see few temperature indicator. M/B Temp: +39?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +33?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +53?C (low = +15?C, high = +45?C) sensor = diode What is that Temp3? It's the hottest. Which one is the best to use if I want to use lm_sensor as a general

Dear List, I'm trying to perform an automatic server shutdown and restart with NUT 2.6.3, openSUSE 12.2 and an Eaton Eco 1600. The server shutdown works but there is no automatic restart when wall power returns. Unlike successful tests with earlier versions of openSUSE, the UPS unit is never switched off. It goes on beeping for as long as I let it. When I pulled the plug from the wall