search for: onbat

...adcast another message - give system 120 s to shut down, then power off bcmxcp is running as /usr/bin/bcmxcp -a PW9125 with ups.conf [PW9125] driver = bcmxcp port = /dev/cua0 shutdown_delay = 120 desc = "tfp-8" upsd and upsmon are running, too upssched is used and works fine, e.g. AT ONBATT * START-TIMER a-onbat 30 AT ONBATT * START-TIMER a-onbat2 120 do alright Problem: When shutting down, shutdown_delay is not recognized, system is powered off immediately as soon as upsdrvctl shutdown is executed. upsc reports shutdown_delay as set. As described in the man pag...

...addr 2: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion addr 3: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion (UPS1 and UPS2) I've configured our NUT system to monitor the UPSes, and it went very fine till the time had arrived for a test. UPS unpower (-> ONBAT), and test what NUT does to the boxes connected to it. After I've unplugged the power cable of UPS1, nut started not to notice that on its cgi interface. It was showing a duplicate of the on-power UPS. After this I've restarted the NUT ups daemon and thus the drivers along with it. After...

On Thu, 8 Jun 2017, Robbie van der Walle wrote: > The "upsrw" command contacts upsd, so it sounds like you should be able to add a user to upsd.users on the NAS, and then run something like > this on the Mac: > > ??upsrw -s battery.charge.low=80 -u upsmaster -s sekret UPS at synology > > Per?http://networkupstools.org/docs/man/upsd.users.html?,