search for: omni1000lcd

...ransmitter (not connected to > the UPS), and another Belkin UPS 500 I gave my father has shown > problems, Yes, my experience with Belkin has been that their hardware and software is crap. It barely works and easily breaks. > so I decided to replace them with multiple TrippLite > OMNI1000LCD units. Unfortunately, these use a USB connector, and > TrippLite's Linux software doesn't support recent versions of Linux > using USB (later than RedHat 8), so I'm presently running them without a > software connection. > > I see from a Google search that you had a...

Hello NUT-UPSUSERS, I would just like to try and help other and indicate that I was able to use the development trunk and get the Tripp Lite OMNI1000LCD UPS (USB) working with the newhidups drivers on Gentoo Linux. The one that is currently available at many local Costco stores and online. In case others need to replicate, I've attempted to document my steps over here. http://linuxlore.blogspot.com/2006/12/howto-set-up-nut-on-gentoo-linux-for...

Hi all: I am trying to get a TrippLito OMNI1000LCD working with nut. Even with the development branch, I get the following.... upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: HID UPS driver 0.13 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. Detected Tripp Lite...

Hello Nut Devs, I'm working with usbhid-ups and a Tripplite OMNI1000LCD. I used a USB packet sniffer to discover something cool about the watchdog feature in this unit. (not sure if the other OMNI-X-LCD models work the same or not.) Basically there's a single HID variable at Report ID 0x52 (UPS.OutletSystem.Outlet.ffff0092) that's one byte (0-255 int) and it co...

...PLUS1000LCD from Costco (USA). I have it attached via USB to a Dell computer with Ubuntu 8.04 server (all updates on it). I've gone through a lot of research on google and this list and can't figure out why my UPS will not connect using nut/usbhid-ups. My setup in ups.conf is: ------- [OMNI1000LCD] driver = usbhid-ups port = auto desc = "Tripp-Lite OMNIPLUS1000LCD USB" ------- Syslog tells me: ------- Sep 3 10:08:03 bigdog kernel: [ 8641.228674] usb 2-1: new low speed USB device using uhci_hcd and address 2 Sep 3 10:08:04 bigdog kernel: [ 8641.645072] us...

Joel Peshkin wrote: > > I hacked in the following additonal changes... > > Index: newhidups.c > =================================================================== > RCS file: /cvsroot/nut/nut/drivers/newhidups.c,v > retrieving revision 1.1.1.1.8.6.2.21 > diff -u -r1.1.1.1.8.6.2.21 newhidups.c > --- newhidups.c 7 Nov 2005 22:14:20 -0000 1.1.1.1.8.6.2.21 > +++

Greetings, Any suggestions? I think I'm close but I can't quite get tripplite_usb to talk to my OMNI1000LCD. I'm new to NUT and couldn't find an answer using Google. With any luck, I've simply missed the obvious. The system I'm using, kaylee, is a debian stable system with some debian testing installed and a 2.6.15.4 kernel. I downloaded NUT 2.0.3 and built it from source using ....

...s ATTR{idVendor}=="09ae", ATTR{idProduct}=="1010", MODE="664", GROUP="dialout" # e.g. TrippLite SU3000LCD2UHV - usbhid-ups ATTR{idVendor}=="09ae", ATTR{idProduct}=="1330", MODE="664", GROUP="dialout" # e.g. TrippLite OMNI1000LCD - usbhid-ups ATTR{idVendor}=="09ae", ATTR{idProduct}=="2005", MODE="664", GROUP="dialout" [...] -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170706/16...

>From section 4.23 of the Developer Guide: "There are a few USB UPS devices that are not HID devices. These devices typically implement some version of the manufacturer?s serial protocol over USB (which is a really dumb idea, by the way). An example is the Tripplite USB. Such devices are *not* supported by the usbhid-ups driver, and are not covered in this document." I guess that

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD