Displaying 5 results from an estimated 5 matches for "nutusb_qx".
2014 Jun 09
2
Lupus 500 MEC0003 Problems
...rom lsusb
idvendor 0x0001 Fry's Electronics
iManufacturer MEC
iProduct MEC0003
The driver is using the Megatec protocol with the Krauler subdriver
So I connected the USB to my Windows machine and using Upsilon2000 it was possible to shutdown the UPS.
I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if this improved matters, unfortunately it didn't help.
So after some sniffing on the USB port I observed that there were some differences between Upsilon200 and NUT (on Upsilon only the shutdown command and beeper toggle have any effect)
So I downloaded NUT 2.7.1 from source an...
2014 Jun 11
0
Lupus 500 MEC0003 Problems
...:
>
> productid 0000
> vendorid 0001
> firmware VER40141F1
>
> and from lsusb
>
> idvendor 0x0001 Fry's Electronics
> iManufacturer MEC
> iProduct MEC0003
>
> The driver is using the Megatec protocol with the Krauler subdriver
Were the blazer and/or nutusb_qx drivers able to match the Krauler subdriver automatically, or did you have to specify it manually in ups.conf?
> So I connected the USB to my Windows machine and using Upsilon2000 it was possible to shutdown the UPS.
>
> I then installed NUT 2.7.1 and tried the nutusb_qx driver to see i...
2014 Jun 29
2
Lupus 500 MEC0003 Problems
...rked.
>
> Can you post the output of upsc, and note if any of those values look wrong?
Seconding Charles's request.
>> So I connected the USB to my Windows machine and using Upsilon2000 it was possible to shutdown the UPS.
>>
>> I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if this improved matters, unfortunately it didn't help.
>>
>> So after some sniffing on the USB port I observed that there were some differences between Upsilon200 and NUT (on Upsilon only the shutdown command and beeper toggle have any effect)
>>
>> So I d...
2014 Jun 30
0
Lupus 500 MEC0003 Problems
...and note if any of those values look
>> wrong?
>
> Seconding Charles's request.
>
>>> So I connected the USB to my Windows machine and using Upsilon2000 it
>>> was possible to shutdown the UPS.
>>>
>>> I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if this
>>> improved matters, unfortunately it didn't help.
>>>
>>> So after some sniffing on the USB port I observed that there were some
>>> differences between Upsilon200 and NUT (on Upsilon only the shutdown
>>> command and beepe...
2014 Jul 04
2
Lupus 500 MEC0003 Problems
...look
>>> wrong?
>>
>> Seconding Charles's request.
>>
>>>> So I connected the USB to my Windows machine and using Upsilon2000 it
>>>> was possible to shutdown the UPS.
>>>>
>>>> I then installed NUT 2.7.1 and tried the nutusb_qx driver to see if
>>>> this improved matters, unfortunately it didn't help.
>>>>
>>>> So after some sniffing on the USB port I observed that there were some
>>>> differences between Upsilon200 and NUT (on Upsilon only the shutdown
>>>&g...