search for: nut_usb_set_altinterface

Displaying 20 results from an estimated 45 matches for "nut_usb_set_altinterface".

2017 Jun 19
1
Unable to use nut-2.7.4 with Eaton 5E1500I USB
On Jun 19, 2017, at 4:02 AM, Manuel Wolfshant wrote: > On 06/18/2017 05:42 PM, Charles Lepple wrote: >> On Jun 16, 2017, at 6:12 AM, Manuel Wolfshant wrote: >>> >>> running autogen.sh was triggered automatically. but even if I do it explicitly, I still get: >>> + autoreconf -i
2020 Aug 19
4
Eaton 5E 1100i USB UPS - failed to claim USB device error
...duct: unknown 2.024090 - Serial Number: unknown 2.024093 - Bus: 002 2.024096 - Device release number: 0001 2.024099 Trying to match device 2.024122 Device matches 2.024134 failed to claim USB device: Device or resource busy 4.898305 detached kernel driver from USB device... 4.898344 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) 9.901010 Unable to get HID descriptor (Connection timed out) 9.901031 HID descriptor length (method 1) -1 9.901037 i=0, extra[i]=09, extra[i+1]=21 9.901044 HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 25 02 9.901048 HID descriptor l...
2015 Aug 18
2
Need help with Tripp Lite SMART1300LCDT NUT v2.7.3
...>? ? 0.278835? ? - ProductID: 3016 >? ? 0.278843? ? - Manufacturer: unknown >? ? 0.278852? ? - Product: unknown >? ? 0.278859? ? - Serial Number: unknown >? ? 0.278867? ? - Bus: /dev/usb >? ? 0.278876? ? Trying to match device >? ? 0.278925? ? Device matches >? ? 0.278937? ? nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) Just for grins, can you try adding "usb_set_altinterface" to the ups.conf section for your UPS, and see if that changes this part of the log? (That is, after "[upstl1300]"). >? ? 0.306126? ? HID descriptor, method 1: (9 bytes) => 09...
2023 Mar 24
1
Question on EATON UPS
...ation descriptor > > 0.958682 [D3] libusb_kernel_driver_active() returned 1 (driver > active) > > 0.958715 [D2] successfully set kernel driver auto-detach flag > > 0.961730 [D2] Claimed interface 0 successfully > > 0.961788 [D3] nut_usb_set_altinterface: skipped > libusb_set_interface_alt_setting(udev, 0, 0) > > 0.962067 [D2] Unable to get HID descriptor (Pipe error) > > 0.962127 [D3] HID descriptor length (method 1) -1 > > 0.962169 [D3] HID descriptor, method 2: (9 bytes) => 09 21 10 > 01...
2015 Aug 18
0
Need help with Tripp Lite SMART1300LCDT NUT v2.7.3
...51.943124???? - VendorID: 09ae ? 51.943149???? - ProductID: 3016 ? 51.943157???? - Manufacturer: unknown ? 51.943165???? - Product: unknown ? 51.943175???? - Serial Number: unknown ? 51.943183???? - Bus: /dev/usb ? 51.943191???? Trying to match device ? 51.943219???? Device matches ? 51.943232???? nut_usb_set_altinterface: calling usb_set_altinterface(udev, 0) ? 51.943258???? nut_usb_set_altinterface: usb_set_altinterface() should not be necessary - please email the nut-upsdev list with information about your UPS. ? 51.945383???? Report[get]: (2 bytes) => 34 64 ? 51.945402???? Path: UPS.PowerSummary.RemainingCapa...
2023 Mar 23
1
Question on EATON UPS
...g first configuration descriptor > > 1.037187 [D3] libusb_kernel_driver_active() returned 1 (driver > active) > > 1.037220 [D2] successfully set kernel driver auto-detach flag > > 1.040994 [D2] Claimed interface 0 successfully > > 1.041063 [D3] nut_usb_set_altinterface: skipped > libusb_set_interface_alt_setting(udev, 0, 0) > > 1.041438 [D2] Unable to get HID descriptor (Pipe error) > > 1.041480 [D3] HID descriptor length (method 1) -1 > > 1.041530 [D3] HID descriptor, method 2: (9 bytes) => 09 21 10 01 > 21 01 22 e...
2020 Aug 19
0
Eaton 5E 1100i USB UPS - failed to claim USB device error
...>    2.024096 - Device release number: 0001 > >    2.024099 Trying to match device > >    2.024122 Device matches > >    2.024134 failed to claim USB device: Device or resource busy > >    4.898305 detached kernel driver from USB device... > >    4.898344 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) > >    9.901010 Unable to get HID descriptor (Connection timed out) > >    9.901031 HID descriptor length (method 1) -1 > >    9.901037 i=0, extra[i]=09, extra[i+1]=21 > >    9.901044 HID descriptor, method 2: (9 bytes) => 09...
2015 Aug 17
3
Need help with Tripp Lite SMART1300LCDT NUT v2.7.3
...? 0.278818???? - VendorID: 09ae ?? 0.278835???? - ProductID: 3016 ?? 0.278843???? - Manufacturer: unknown ?? 0.278852???? - Product: unknown ?? 0.278859???? - Serial Number: unknown ?? 0.278867???? - Bus: /dev/usb ?? 0.278876???? Trying to match device ?? 0.278925???? Device matches ?? 0.278937???? nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) ?? 0.306126???? HID descriptor, method 1: (9 bytes) => 09 21 11 01 00 01 22 6e 03 ?? 0.306148???? HID descriptor, method 2: (9 bytes) => 09 21 11 01 00 01 22 6e 03 ?? 0.306156???? HID descriptor length 878 ?? 5.279939???? Unable to get Report descriptor:...
2016 Sep 08
2
blazer_usb MEC0002 problem Fry's Electronics (Turbo-X) [HID PDC?]
...- Manufacturer: MEC - Product: MEC0002 - Serial Number: unknown - - Bus: 008 + - Bus: 006 - Device release number: 0100 Trying to match device Device matches + failed to claim USB device: could not claim interface 0: Device or resource busy + detached kernel driver from USB device... nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) HID descriptor, method 1: (9 bytes) => 09 21 00 01 00 01 22 70 02 **** device or resource busy? 11) retrying as root #/lib/nut/usbhid-ups -DDD -u root -x explore -a turbo-x 2>&1 | tee delme.root 12) stripping, diffing -- no diffs Here is the...
2023 Mar 09
1
Question on EATON UPS
...vice matches 1.037131 [D2] Reading first configuration descriptor 1.037187 [D3] libusb_kernel_driver_active() returned 1 (driver active) 1.037220 [D2] successfully set kernel driver auto-detach flag 1.040994 [D2] Claimed interface 0 successfully 1.041063 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0) 1.041438 [D2] Unable to get HID descriptor (Pipe error) 1.041480 [D3] HID descriptor length (method 1) -1 1.041530 [D3] HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 e1 01 1.041566 [D3] HID descri...
2020 May 15
0
Unable to get NUT working
...19851 - Bus : 001 5.019859 Matched expected vendor='ATCL FOR UPS'. 5.020208 USB device [0001:0000] opened I have also tried with blazer_usb and nutdrv_qx. With the former I get: 0.012149 Trying to match device 0.012194 Device matches 0.012224 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) 0.012242 Trying megatec protocol... 0.012255 send: Q1 0.013044 read: Broken pipe 0.013543 Stall condition cleared 0.013564 blazer_status: short reply 0.013574 Status read 1 failed 0.013581 send: Q1 0.014632...
2023 Mar 25
1
Question on EATON UPS
...0.958682 [D3] libusb_kernel_driver_active() returned 1 (driver >> active) >> >> 0.958715 [D2] successfully set kernel driver auto-detach flag >> >> 0.961730 [D2] Claimed interface 0 successfully >> >> 0.961788 [D3] nut_usb_set_altinterface: skipped >> libusb_set_interface_alt_setting(udev, 0, 0) >> >> 0.962067 [D2] Unable to get HID descriptor (Pipe error) >> >> 0.962127 [D3] HID descriptor length (method 1) -1 >> >> 0.962169 [D3] HID descriptor, method 2: (9 b...
2018 Aug 19
2
TrippLite SMX1500LCDT FreeBSD 11.2 trouble
...- ProductID: 3016 0.034097 - Manufacturer: unknown 0.034100 - Product: unknown 0.034102 - Serial Number: unknown 0.034105 - Bus: /dev/usb 0.034108 - Device release number: 0002 0.034111 Trying to match device 0.034128 Device matches 0.034135 nut_usb_set_altinterface: calling usb_set_altinterface(udev, 0) 0.034148 nut_usb_set_altinterface: usb_set_altinterface() should not be necessary - please email the nut-upsdev list with information about your UPS. 0.045127 Unable to get HID descriptor (Unknown error) Could you help please? Thanks and regard...
2016 Sep 08
0
blazer_usb MEC0002 problem Fry's Electronics (Turbo-X) [HID PDC?]
On Sep 8, 2016, at 9:25 AM, Vassilis Virvilis <vasvir at iit.demokritos.gr> wrote: > > + failed to claim USB device: could not claim interface 0: Device or > resource busy > + detached kernel driver from USB device... > nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) > HID descriptor, method 1: (9 bytes) => 09 21 00 01 00 01 22 70 02 > > **** device or resource busy? This happens the first time you run a NUT driver after the USB cable is plugged in, or the system reboots. The old Linux kernel HID driver was...
2015 Aug 18
0
Need help with Tripp Lite SMART1300LCDT NUT v2.7.3
...0.278835 - ProductID: 3016 > 0.278843 - Manufacturer: unknown > 0.278852 - Product: unknown > 0.278859 - Serial Number: unknown > 0.278867 - Bus: /dev/usb > 0.278876 Trying to match device > 0.278925 Device matches > 0.278937 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) Just for grins, can you try adding "usb_set_altinterface" to the ups.conf section for your UPS, and see if that changes this part of the log? (That is, after "[upstl1300]"). > 0.306126 HID descriptor, method 1: (9 bytes) => 0...
2023 Mar 09
1
Question on EATON UPS
On Thursday, March 9th, 2023 at 8:34 AM, Dan Langille via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> wrote: >> The UPS has been defined in ups.conf as: >> >> [myups3] >> >> driver : usbhid-ups >> >> port = auto >> >> vendorid = 0463 >> >> productid = ffff >> >> desc = "5S" >> >> bus
2017 Oct 30
2
Problems in communication with Mustek PowerMust 1060 LCD
...ProductID: 5161 2.004532 [D2] - Manufacturer: unknown 2.004541 [D2] - Product: unknown 2.004550 [D2] - Serial Number: unknown 2.004558 [D2] - Bus: 001 2.004567 [D2] - Device release number: 0002 2.004575 [D2] Trying to match device 2.004619 [D2] Device matches 2.004648 [D3] nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) 2.004679 [D2] Skipping megatec protocol... 2.004689 [D2] Trying mustek protocol... 2.731556 [D3] send: QS 2.737382 [D3] read: (229.7 231.6 229.7 023 50.1 27.5 --.- 00001001 2.737456 [D2] blazer_status: non numerical value [--.-] 2.737477 [D2]...
2016 Sep 08
2
blazer_usb MEC0002 problem Fry's Electronics (Turbo-X) [HID PDC?]
> You could also try adding "-x usb_set_altinterface" to the command line > (or adding it to ups.conf). The lsusb output implies that the only valid > setting is 0 (bAlternateSetting), but it might need to be set explicitly. I checked with -x usb_set_altinterface and it says nut_usb_set_altinterface: usb_set_altinterface() should not be necessary - please email the nut-upsdev list with information about your UPS no other difference from the previous runs > > It might be useful to check and see if the vendor's suggested software > actually works with this UPS, and if so, record...
2016 Feb 15
1
nutdrv_qx - Device not supported
Hi Thank you very much for the feedback. I will download and try to get it working on the Raspberry Pi. Regards Tom On Sun, Feb 14, 2016 at 1:49 AM, hyouko at gmail.com <hyouko at gmail.com> wrote: > > I have the RCT 3KVA Axpert solar hybrid inverter. It is also known as > the > > MPP Solar PIP-MS series, the IPS-4000WM and the Voltronic Axpert MKS. I > am > >
2017 Jun 14
2
Unable to use nut-2.7.4 with Eaton 5E1500I USB
2017-06-13 17:49 GMT+02:00 Manuel Wolfshant <wolfy at nobugconsulting.ro>: > On 06/13/2017 05:48 PM, Arnaud Quette wrote: > > Hi Manuel > > > Hi Arno > > Hi Manuel > > > 2017-06-07 14:40 GMT+02:00 Charles Lepple <clepple at gmail.com>: > >> On Jun 7, 2017, at 5:47 AM, Manuel Wolfshant <wolfy at nobugconsulting.ro> >> wrote: