search for: ntmode

...I was curious about their potential as phone ports. The Diva's 3 and 4 ports are already set to NT mode at boot time: /sbin/divactrl load -SeparateConfig -c 1 -f ETSI -f1 ETSI -f2 ETSI -u2 -x2 -f3 ETSI -u3 -x3 And I think the capi.conf (using Armin's 0.6.1 version) looks OK: [DIVA2] ntmode=yes isdnmode=ptp incomingmsn=* controller=4 group=3 accountcode=diva context=international echosquelch=0 echocancel=no devices=1 But when I plug the phone into port 3 or 4 no led lights up, even with a Y plug and when dialing I get a busy. Before digging to deep, I am looking for some in...

...> ISDN1#02: CAPI INFO 0x3490: Normal call clearing 2. BUT: If I hangup the softphone before someone answers, I get: == ISDN1#02: CAPI Hangingup for PLCI=0x101 in state 5 and the 1st channel is left occupied: atlas*CLI> capi show channels CAPI B-channel information: Line-Name NTmode state i/o bproto isdnstate ton number ---------------------------------------------------------------- ISDN1#02 no discP O trans *P 0x00 '1000'->'2104988888' ISDN1#01 no ----- - trans 0x00 ''->'' If I call ag...

...con DIVA Server cards, you just set the '-x' option with divactrl >or set NT-mode in the config wizard. >chan_capi does not (need) to know anything about what protocol the card is >doing. CAPI is independent here. Ok. >Anyway, if the card is set to NT mode, you should specify ntmode=yes >in the capi.conf to tell chan_capi to handle the progress better >(get progress tones). Fine! One last related subpoint: while Eicon Diva cards have their own setup application, is there anything standard to control the basic setup of generic HFC-S cards? (something similar to the ztco...

...BER -- reventix: info element CHANNEL IDENTIFICATION 89 Urgent handler == reventix: CAPI Hangingup == reventix: Interface cleanup PLCI=0x101 Urgent handler --- snap --- --- snip: capi.conf --- [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 ;ulaw=yes [reventix] ;ntmode=yes isdnmode=msn incomingmsn=* controller=1 group=1 ;prefix=0 softdtmf=on relaxdtmf=on accountcode= context=reventix-incoming holdtype=local ;immediate=yes ;echosquelch=1 ;echocancel=yes echocancelold=yes ;echotail=64 ;bridge=yes ;callgroup=1 ;deflect=1234567 devices=2 --- snap --- Asterisk is loc...

...TY NUMBER Urgent handler -- numeris1: info element CHANNEL IDENTIFICATION 89 Urgent handler -- numeris1: info element Sending Complete Urgent handler == numeris1: CAPI Hangingup Urgent handler == numeris1: Interface cleanup PLCI=0x101 Urgent handler And here is my capi.conf [numeris1] ;ntmode=yes isdnmode=msn incomingmsn=* controller=1 group=1 ;prefix=0 softdtmf=on relaxdtmf=on accountcode= context=entrant holdtype=local immediate=yes echocancelold=yes devices=2 Cedric Fontaine

...000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS gertrud*CLI> capi show channels CAPI B-channel information: Line-Name NTmode state i/o bproto isdnstate ton number - ---------------------------------------------------------------- ISDN1#02 no ----- - trans 0x00 ''->'' ISDN1#01 no ----- - trans 0x00 ''->'' capi.conf: ; ; CAPI con...

...risk server to allow our PBX to make calls out via VoIP, but when it calls out I get this message: chan_capi.c: did not find device for msn = (eg no msn) Which would be correct because at that point I've only asked for an outside line. I'm using CAPI obviously, and my config is: [ISDN1] ntmode=yes isdnmode=did incomingmsn=* immediate=yes controller=1 group=1 softdtmf=on relaxdtmf=on accountcode= context=default devices=2 Any pointers? Thanks James

asterisk-users-request@lists.digium.com is believed to have said: >> While we are at the subject another couple of simple related question. >> >> Are HFC-S cards active? I got one for a very low price, so that I >> imagine it will be NOT the case... > >No, these cards are passive. The protocol handling must be done by >the hosts CPU / driver. OK; price

Hello everyone, I'm using very simple setup to make and receive external ISDN calls through a softphone (x-lite version 3.0 - Win32) via an asterisk box. Hardware setup: - Dialogic Diva BRI (lspci yields: Network controller: Eicon Technology Corporation DIVA Server BRI-2M/-2F (rev 01)) - ISDN BRI line Software setup: - Redhat 9 - asterisk-1.4.16.2 - chan_capi-1.0.2 Asterisk configuration

...ll from my office? We are using a EICON DIVA Server 4 BRI with the current driver and an asterisk 1.4.13. Here is the start of the capi.conf [General] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 language=de immediate=yes faxdetect=off [ISDN1] incomingmsn=* context=from-extern ntmode=yes controller=1 group=1 callgroup=1 accountcode=ISDN1 echocancel=yes echosquelch=1 echotail=64 devices=2 Thanks for any suggestions, Stefan -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Geschaeftsfuehrer Moltkestrasse 49 D-76133...

...on o Voice Activity Detection o Voice compression (GSM, G.726) ===== capi.conf ===== [general] nationalprefix=039 ;;internationalprefix=011 rxgain=1.0 txgain=2.0 ;rxgain=1.0 ;txgain=1.0 alaw=yes ; ;ulaw=yes ;set this, if you live in u-law world instead of a-law --beppe [ISDN3] ntmode=yes incomingmsn=* controller=3 group=1 ;softdtmf=on ;relaxdtmf=on ;accountcode= context=isdn3in holdtype=local immediate=yes ;echosquelch=1 echocancel=yes ;echocancelold=yes echotail=64 bridge=yes callgroup=1 ;deflect=1234567 devices=2 ====== and this is a...

...fault music on hold class when placed on hold. ; interface sections ... [ISDN1] ;this example interface gets name 'ISDN1' and may be any ;name not starting with 'g' or 'contr'. ;Use one interface section for each isdn port! ;ntmode=yes ;if isdn card operates in nt mode, set this to yes isdnmode=msn ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * =...

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

...fault music on hold class when placed on hold. ; interface sections ... [ISDN1] ;this example interface gets name 'ISDN1' and may be any ;name not starting with 'g' or 'contr'. ;Use one interface section for each isdn port! ;ntmode=yes ;if isdn card operates in nt mode, set this to yes isdnmode=msn ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * =...

Hello, I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As a BRI connection has 2 channels and allows 2 simultaneous calls, numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system is working (partly, read on), the trick is the correct cable wiring and setup the PBX's port