Displaying 20 results from an estimated 24 matches for "ntba".
Did you mean:
ntb
2005 Aug 13
2
MISDN callerid
Hi all,
I have a cologne chip card which is connected directly to the ntba.
Outgoing and incoming calls work fine, but incoming calls from ntba have
the wrong callerid (first 0 is missing). I'm using current jolly misdn
drivers and chan_misdn-14_04_05 with asterisk stable.
Is anyone seeing this behaviour too?
Thanks in advance
Christian
2005 Aug 12
4
Billion BRI PCI card
I'm looking at experimenting with asterisk with an ISDN BRI and ISDN
phones (since I have these already).
I saw that the Billion card was cheap and could be used in either TE or
NT modes.
I have the following question which I couldn't answer by reading through
the manual. Maybe someone has experience of using this card and can help
me out.
when using in NT mode does the card require
2004 Aug 26
1
No signal from ISDN-phone connected to hfc card in NT-mode
Hi!
I'm struggeling had to get a hfc pci card working in NT-Mode. I've
installed a very basic test system with just one hfc pci card connected
to an ISDN-phone over a modified NTBA as described on jollies homepage.
I commpiled asterisk as descibed in kape's INSTALL file that comes with
'bri_stuff'. I have not modified the config fieles yet.
After connecting to asterisk by runnig 'asterisk -rvvv' I get no message
what so ever, when picking up the phone or...
2016 May 14
3
Questions... connecting Asterisk to the World
Greetings,
asterisk list and community,
I have a problem in how our telefon switch (Siemens HiCOM)
"talks" with my new configured Asterisk server (V.11.18.0)
without my Asterisks server in the middle....
<phone> <--> Siemens HiCOM <-ISDN-> NTBA <-...-> PBX Telekom
A phone connected to the switch requests an "Outgoing" line
by dialing "0". The party is connected via ISDN to
the carrier (deutsche Telekom) where the party preceeds
to dial numbers... and the call is connected....
What I can see while I am dialing i...
2006 Feb 07
1
Problem with ZAPHFC: internal S0 hangs when hanging up
Hello all,
if I try to call from one phone on the internal S0 to another on the same S0
using zaphfc, the bus is hung up. The called phone is ringing, but I can't
talk from one phone to the other. The error I get is:
-- Executing Dial("Zap/2-1", "ZAP/1/55|15|tr") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 1/55
-- Channel 0/1,
2004 Jul 12
1
Cheap ISDN interface + Asterisk what to choose?
...#39;ve already got a couple of Siemens ISDN phones on an ISDN line, and
I was wondering what the development status was for using them with
Asterisk?
My hope is that it is possible to attach the Asterisk to the existing
S0 bus, so that we can use the handsets both via Asterisk and the
existing ISDN NTBA.
Any help and ideas is appreciated!
/Fribse
2004 Aug 26
0
Problems with ISDN (NT-Mode) - Error Messages inside
Hello everyone,
I try to connect the Asterisk PBX Server on my NTBA
(NT1) - actually its "hard"-connected on the box, but
I've tried a crosslink-ISDN cable, too.
My ISDN-Phone is connected on one port (of two)
S0-Ports on NTBA.
When I start Asterisk and want to make a call I'll
geht a lot of this messages -->
040827-034639 WARNING[213005]:...
2005 Oct 07
1
Echo cancel on HFC-S cards and CIDNum setting on outgoing calls
...ome changes in my zapata.conf, with rxgain and txgain
settings, but to me its
hard to find a configuration which is good for every call i make. Is
there anyone in the list who has an asterisk running with HFC-S card
(in Austria), with the right settings for the echo cancelation (for
Austria Telecom NTBA)?
2005 Jul 03
1
asterisk strips off trailing digit from incoming calls
so here it is, the problem that's been nagging me for the past 2 days:
connected a box to my telco's NTBA <-> zap/asterisk. which works:
box:/etc/asterisk# cat /proc/zaptel/1
Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" HDB3/CCS
1 ZTHFC1/0/1 Clear (In use)
2 ZTHFC1/0/2 Clear (In use)
3 ZTHFC1/0/3 HDLCFCS (In use)
so then I...
2003 Mar 03
1
NT mode with hfc cards for emulation of internal isdn S0 bus
...s (driver under development)
d-link (http://www.d-link.com) builds cards with these chips (search for
DMI-128I+) and they seem to be quite cheap.
on the page you will also find some software that offers pbx features and
a h.323 gateway, as well as some documentation on how to modify your
ntba/nt1 to power the bus.
would be cool if someone could test the kit, write to the list if it works
and what the chances are to enable * to use the nt feature.
greetings
morten (mortck)
--
Diese Nachricht wurde durch MailScanner (http://www.mailscanner.info)
automatisch auf Viren sowie andere g...
2004 Apr 23
3
Problem With zaphfc
I've this error
How i can find the problem?
Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89
Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89
Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1
Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89
Apr 23 12:25:02 WARNING[131081]: PRI:
2004 May 27
6
CAPI / Channels
hi all,
i have a probably very stupid question/problem.
for testing purpose i am trying to get asterisk running with two isdn
cards. I'd only like to here the demo sound when i call the number - but
nothing works.
The output of show channels is not showing any channel - should there be
4 channels ? - capi info shows my two cards perfectly.
The ISDN Controller's are attached to an PTMP
2004 Jun 07
6
chan_capi and DDI (Anlagenanschluss)
Hi all !
We have 3 NTBAs which are all going to our existing PBX. Our areacode is
06003 and our DDI enabled number 9141.
I want to exchange that PBX with Asterisk, but still struggle to get it
working.
My CAPI.CONF is currently like this:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.800000
txgain=0.8000...
2003 Oct 16
0
Re-2: Some questions for chan_capi
Hi!
Yes you're right (for windows), but I found this thread
http://www.mail-archive.com/asterisk-users@lists.digium.com/msg10695.html
and that works! The first card is connected to a normal Telekom NTBA, the second to an internal PBX. There have to be a possibility to configure multiple ISDN cards (e.g. AVM B1 PCI) through capi.conf. How?
Or does chan_capi support only one ISDN-Card?
Thanks for your reply,
Stefan
-------- Original Message --------
Subject: Re: [Asterisk-Users] Some questions f...
2004 Aug 23
2
HFC-S in NT mode, wiring?
I've got an old HFC-S card to play with, and I would like to use it in
NT mode. I've a problem only: wiring. I can't fully understand the
instructions I was able to find online. Someone can point me to a site
which explains the whole procedure clearly (like with some schematics,
even in ASCII)?
TIA,
Simone.
2006 Jan 05
1
bristuff/zaphfc disturbing other ISDN phones
I have ISDN BRI line (Point-to-multipoint), with HFC card and
bristuff/zaphfc driver.
I also have TA attached to NT, with analog phones and modem on it.
When I'm dialling through Asterisk/bristuff, and in the same time TA
have some conversation (or maybe modem link) on channel 1, I can hear
that conversation (or modem) very short period (0.2sec), and I also
disturbing that conversation
2006 Jan 09
0
zaphfc and T0 ISDN to Alcatel PBX
...mination 100ohm resistors to card.
But my problem is that I do not have any answer to any messages.
When Asterisk send SETUP, there is no answer for it. And also
I don't receive any messages on D channel from PBX. And
I don't know what is wrong.
- Zaphfc with ISDN phone (throught NT1/NTBA to power
phone), is working OK (card with the same configuration as above).
- Also I have ISDN GSM Gateway which is connected to the trunk which is
configured exactly same as my T0 trunk and it's working.
Also it's working with ISDN phone directly connected to it throught NT1...
2005 Aug 28
0
hfc-pci/zaphfc: Asterisk hangs with signalling bri_net_ptmp but not with bri_net
Please forgive me, if I misunderstand the problem completely.
Following instructions in several german blogs, I want to configure
Asterisk with a hfc-pci card, an old NTBA and an ISDN phone
as a SIP device.
It seems that I have to set signalling in zapata.conf to bri_net_ptmp.
When I do this, Asterisk will hang if started with -vvvvc, the last
lines of output being:
[res_features.so] => (Call Parking Resource)
== Parsing '/etc/asterisk/features.conf':...
2007 Jul 30
2
Strange ISDN Troubles
...sterisk seems to see the ISDN-card but if i try to place a test-call
from the outside i don't see anything on the asterisk-console (set debug
and verbose to 99). Shouldn't i see _something_ on the console, even if
the DID which is dialed isn't configured yet?
I tested the cable and the NTBA both with a ISDN-phone. This worked
properly. But if i plug the cable into the asterisk-server i just get a
"number busy"-signal and don't see any messages on the asterisk console
or in the log files.
regards
Florian Arthofer
=====exerpts=====
capiinfo:
Number of Controllers : 1
Co...
2004 Jan 14
7
Why I can not use the conference
Hi All,
The meetme.conf have created as below:
[rooms]
conf => 101
conf => 102
and extensions.conf as below:
exten => _1XX,1,MeetMe,${EXTEN}
why the warning printed when I called 101.
WARNING[27660]: File pbx.c, Line 1051 (pbx_extension_helper): No application 'MeetMe' for extension (ipcentrex, 101, 1)
And I found asterisk have not load the meetme.conf when it starts up.