search for: notrails

....fcgi #AddHandler fcgid-script .fcgi AddHandler cgi-script .cgi Options +FollowSymLinks +ExecCGI # If you don''t want Rails to look in certain directories, # use the following rewrite rules so that Apache won''t rewrite certain requests # # Example: # RewriteCond %{REQUEST_URI} ^/notrails.* # RewriteRule .* - [L] # Redirect all requests not available on the filesystem to Rails # By default the cgi dispatcher is used which is very slow # # For better performance replace the dispatcher with the fastcgi one # # Example: RewriteRule ^(.*)$ dispatch.fcgi [QSA,L] RewriteEngine On # If...

Hi, I have a linux server running kernel 2.6.19 that is connected with 2 seperate 100Mbit links to the same isp: +---+ +---------------+ | I | +---------------+ | | | S | | | | eth0 --+--------------+ P | | |

Hi, I'm running 1.9.18p7 on a Solaris 2.5 box with two interfaces. I have 2 class-C networks that are divided up with a 26-bit netmask (255.255.255.192) into 4 subnets, each. This is what the interfaces look like: le0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500 inet 38.253.161.130 netmask ffffffc0 broadcast 38.253.161.128 ether

...fcgi #AddHandler fcgid-script .fcgi AddHandler cgi-script .cgi Options +FollowSymLinks +ExecCGI # If you don''t want Rails to look in certain directories, # use the following rewrite rules so that Apache won''t rewrite certain requests # # Example: # RewriteCond %{REQUEST_URI} ^/notrails.* # RewriteRule .* - [L] # Redirect all requests not available on the filesystem to Rails # By default the cgi dispatcher is used which is very slow # # For better performance replace the dispatcher with the fastcgi one # # Example: RewriteRule ^(.*)$ dispatch.fcgi [QSA,L] RewriteEngine On # If...

Hi, I installed rails following the instruccions from http://wiki.rubyonrails.com/rails/pages/HowtoInstallAndRunRubyOnRailsOnCpanel but when i try see the application i have a 500 Internal Server Error, this is only with apache because i can run with webrick Please i am desesperate -------------- next part -------------- An HTML attachment was scrubbed... URL:

...AddHandler fastcgi-script .fcgi AddHandler cgi-script .pl .cgi Options +FollowSymLinks +ExecCGI # If you don''t want Rails to look in certain directories, # use the following rewrite rules so that Apache won''t rewrite certain requests # # Example: # RewriteCond %{REQUEST_URI} ^/notrails.* # RewriteRule .* - [L] # Redirect all requests not available on the filesystem to Rails # By default the cgi dispatcher is used which is very slow # # For better performance replace the dispatcher with the fastcgi one # # Example: # RewriteRule ^(.*)$ dispatch.cgi [QSA,L] RewriteEngine On #...

...ions AddHandler fastcgi-script .fcgi AddHandler cgi-script .cgi Options +FollowSymLinks +ExecCGI # If you don''t want Rails to look in certain directories, # use the following rewrite rules so that Apache won''t rewrite certain requests # # Example: # RewriteCond %{REQUEST_URI} ^/notrails.* # RewriteRule .* - [L] # Redirect all requests not available on the filesystem to Rails # By default the cgi dispatcher is used which is very slow # # For better performance replace the dispatcher with the fastcgi one # # Example: # RewriteRule ^(.*)$ dispatch.fcgi [QSA,L] RewriteEngine On...

Hello everyone, First things first. * shorewall version: 2.2.1 * ip addr show: 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: sit0: <NOARP> mtu 1480 qdisc noop link/sit 0.0.0.0 brd 0.0.0.0 3: eth0:

I have a DomU as a firewall (using the Dom0 kernel). I hid the three nics from Dom0 and assigned them to the firewall VM. The firewall VM sees the three nics no problem. Eth0 comes up and grabs an IP automatically from my DHCP server, however eth1 and eth2 are configured with static IPs but they do not come up with an IP: Here is my ''ifconfig'': [root@fw01 ~]# ifconfig eth0

Hello all, I had setup shorewall before succesfully with a normal LAN to internet connection. Now I''m connected to the internet via VPN and I got problems with configuring Shorewall. Any help is appreciated. This is my setup: - Gentoo Linux laptop (kernel gentoo-dev-sources-2.6.8.1) with Shorewall 2.0.4 (setup for Standalone one interface) and iptables 1.2.11 - VPN client is

Hello, I cannot establish Xserver connection via wireless subnet, while telnet is working fine. There was a similar problem before in Shorewall over IPSEC that Tom had fixed. Also, ping is working, but traceroute is not. Finally, PuTTY gets a connectivity error after couple minutes of inactivity over wireless when connected to the firewall/gateway. Wireless is configured per instructions in

Finally got fcgi installed with apache. Now whe I click on "About your application''s environment" on the Rails Welcome page, it simply prints out the dispatch.fcgi script as shown below. I would appreciate any help I can get on this. I can provide other infomation if necessary. #!/usr/local/bin/ruby # # You may specify the path to the FastCGI crash log (a log of unhandled #

Hi all, I''m using Gentoo Linux Distribution and I''ve upgraded my firewall from Shorewall 1.4 to 2.0.4, however my LANs stop having internet access. I have a server with shorewall 2.0.4 installed and 3 interfaces. eth0 and eth1 are interfaces to a LAN and to my laptop and eth2 is the net interface. I have masq like: eth2 eth0 eth2 eth1

I'm recording TCP network throughput performance between Dom0 IP stack and all my guest domains (currently 6 running simultaneously). All guests are running simultaneously, but I only ever transmit between Dom0 and one of the DomUs while the other five are idle. When running a netperf TCP_STREAM test (netperf on Dom0, netserver on DomU) I record the following performance numbers, CPU % as

Hao Yu Commercial Scale Out IBM T.J. Watson Research Center 1101 Kitchawan Rd/Route 134, Rm 36-019 Yorktown Heights, NY 10598-0218 914-945-1854, Email: yuh@us.ibm.com ----- Forwarded by Hao Yu/Watson/IBM on 10/31/2006 09:52 AM ----- Jimi

Hao Yu Commercial Scale Out IBM T.J. Watson Research Center 1101 Kitchawan Rd/Route 134, Rm 36-019 Yorktown Heights, NY 10598-0218 914-945-1854, Email: yuh@us.ibm.com ----- Forwarded by Hao Yu/Watson/IBM on 10/31/2006 09:52 AM ----- Jimi

shorewall version 2.0.7 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:48:53:25:b2 brd ff:ff:ff:ff:ff:ff inet 81.169.188.152/32 brd 81.169.188.152 scope global eth0 3: eth1:

I am setting up my httpd.conf file so I can secure a site create in RubyonRails. The problem that I am having is: File does not exist: /usr/home/mhale/hieraki-1.0.2/public/frontpage/index File does not exist: /usr/home/mhale/hieraki-1.0.2/public/frontpage/index File does not exist: /usr/home/mhale/hieraki-1.0.2/public/frontpage/index So apache is reading "frontpage/index" as a

...ions AddHandler fastcgi-script .fcgi AddHandler cgi-script .cgi Options +FollowSymLinks +ExecCGI # If you don''t want Rails to look in certain directories, # use the following rewrite rules so that Apache won''t rewrite certain requests # # Example: # RewriteCond %{REQUEST_URI} ^/notrails.* # RewriteRule .* - [L] # Redirect all requests not available on the filesystem to Rails # By default the cgi dispatcher is used which is very slow # # For better performance replace the dispatcher with the fastcgi one # # Example: # RewriteRule ^(.*)$ dispatch.fcgi [QSA,L] RewriteEngine On...

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on