search for: not_inus

...nsions.conf exten => 975,1,Goto(975-${DEVICE_STATE(SIP/0317998975)},1) exten => 975-INUSE,1,VoiceMail(0317998975 at inputinterior.se,bs) exten => 975-INUSE,2,Hangup() exten => 975-NOANSWER,1,VoiceMail(0317998975 at inputinterior.se,us) exten => 975-NOANSWER,2,Hangup() exten => 975-NOT_INUSE,1,Dial(SIP/0317998975&H323/00733025975 at Avaya,20) exten => 975-NOT_INUSE,2,Goto(975-${DIALSTATUS},1) exten => 975-NOT_INUSE,3,Hangup() When calling 975, both SIP and cell phone starts to ring. Answering on the SIP phone, cell phone stop ringing. Answering on the cell phone, SIP phone...

...},1) exten => 0317998975,2,Hangup() exten => 0317998975-INUSE,1,VoiceMail(0317998975 at inputinterior.se,bs) exten => 0317998975-INUSE,2,Hangup() exten => 0317998975-NOANSWER,1,VoiceMail(0317998975 at inputinterior.se,us) exten => 0317998975-NOANSWER,2,Hangup() exten => 0317998975-NOT_INUSE,1,Dial(SIP/0317998975,2) exten => 0317998975-NOT_INUSE,2,Goto(0317998975-${DIALSTATUS},1) exten => 0317998975-NOT_INUSE,3,Hangup() I know that I have a very short dial timeout, just for testing purposes. If i call 0317998975 and that extension is "free": The 9650 phones rings for...

Hello Have a setup of asterisk with realtime SIP devices. Trying to organise monitoring of my SIP devices. Once device registered, its state becomes NOT_INUSE (result of DEVICE_STATE(SIP/device) function). Simulating of device breakage - powerdown it. Waiting for a while (minute or two), retrieving DEVICE_STATE(SIP/device) again - no changes! Awaited UNAVAILABLE. doing from CLI: sip qualify peer device load no result. What I did not configured? My si...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I must be missing something here but I can't figure out why I can't get DEVICE_STATE() to give me anything other than "NOT_INUSE". I have two extensions: 6666 and 6668. I used 6668 to make a call to yet another phone, so I know that it's busy. I then use 6666 to call 6668 and in the dialplan have a noop to see what DEVICE_STATE() is returning for both extensions. I get: [Jul 15 17:20:43] -- Executing [66...

Is there a way skip / ignore the member whose status is busy in the Queue. I have two channel member in queue and i have set the peer limit 2 for these members. I want to skip those member who are currently on the call (answered to calls) and now their status is busy, if Queue see the busy status caller will not enter in the Queue and go to the next priority. [test-queue] strategy = rrmemory

Hi list, I need your help ,I have an incoming call x the ivr and the operator takes the call. ext "101" , If a second call reenters and the operator is talking, I want to send to the extension 102 I use the Variable DIALSTATUS , but not working check IVR [IVRINMA] exten => s,1,Wait(1) exten => s,n,Set(CHANNEL(language)=es) same=> n,Set(TIMEOUT(digit)=4) same=>

...xten =3D> 0106024976,1,Set(DB(DS/0733025975)=3DUNAVAILABLE) exten =3D> 0106024976,n,Hangup() Just a short call to my cell phone, to se if i get anything back, my = cell phone doesn=E2=80=99t even ring. Wait a second if the call is redirected, then check to se if the status = has changed from NOT_INUSE to something else. Dont know if it is a stupid idea, but it worked on my cell phone, and = the switchboard girls was very happy to be able =E2=80=9Cto ask=E2=80=9D = my cell phone =E2=80=9Cwhat I am doing=E2=80=9D=20 Most of the day i am INUSE so they dont need to transfer calls to me = ehen they...

...{FROM_DID},60,g) exten => s,n,Goto(s-${DIALSTATUS},1) exten => s,n(nofax),Playtones(busy) exten => s,n,NoOp(NO MODEMS AVAILABLE) exten => s,n,Wait(20) exten => s,n,Hangup() exten => s-ANSWER,1,NoOp(IAXMODEM HANGUP) exten => s-ANSWER,n,Set(DEVICE_STATE(Custom:iaxmodem${FAX_IDX})=NOT_INUSE) exten => s-ANSWER,n,Hangup() exten => _s-.,1,Set(FAX_IDX=${MATH(1+${FAX_IDX},i)}) exten => _s-.,n,Goto(s,1) exten => h,1,Set(DEVICE_STATE(Custom:iaxmodem${FAX_IDX})=NOT_INUSE) The current state requires me to restart Asterisk almost every day. I'm also seeing this on a completely...

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

Hi Is there any way to set the presence state of a peer to in-use in asterisk 1.8? The idea is to integrate DND buttons on phones to BLF. Regards -- Ishfaq Malik Department: VOIP Support Company: Packnet Limited t: +44 (0)161 660 2350 f: +44 (0)161 660 9825 e: ish at pack-net.co.uk w: http://www.pack-net.co.uk Registered Address: PACKNET LIMITED, Duplex 2, Ducie House 37 Ducie Street

...-------------- --- Custom Device States -------------------------------------------- --------------------------------------------------------------------- --- --- Name: 'Custom:queuememberCALLERID(num)' ?State: 'RINGING' --- --- Name: 'Custom:queuememberh' ?State: 'NOT_INUSE' --- --- Name: 'Custom:queuemembers' ?State: 'INUSE' --- Thank you Have a nice day! S pozdravem Tom?? Hol? INTERCONNECT s.r.o. Z?kaznick? linka: +420 222261333 TEL: +420 222261321 FAX: +420 246063179 holy at interconnect.cz -------------- next part -------------- A...

Hi and happy new year! My question: - two extensions: 1111 and 2222 - an active call on 1111 - incoming calls to 1111 should be forwarded to 1111 (call advice!) and 2222 I know how can I forward an incoming call to more than an extension, but I have no idea how can I get the information, that 1111 has already an active call... I think, I need something like: exten =>

You can use a custom device state to do it. [dnd] ;DND Toggle exten => *363,1,Answer() same => n,Set(CURRENT_PRESENCE=${DEVICE_STATE(Custom:DND${CHANNEL(peername)})}) same => n,GotoIf($[${CURRENT_PRESENCE}=NOT_INUSE]?*78,1:*79,1) ;DND On exten => *78,1,NoOP(Turning DND On) same => n,Set(DEVICE_STATE(Custom:DND${CHANNEL(peername)})=BUSY) same => n,Playback(do-not-disturb&enabled) same => n,Hangup() ;DND Off exten => *79,1,NoOP(Turning DND Off) same => n,Set(DEVICE_STAT...

...e B's BLF for A goes off. Phone A hang's up, Phone B's BLF for A goes on. From this point forward the Phone B's BLF for A seems to always show the opposite of what it should. I've looked at 'core show hints' and it is in fact reporting INUSE when it's not, and NOT_INUSE when it is. Is this a bug or just some configuration option that I am missing? Is there a way to manually change the devicestate for a channel? Marc Hudson

...I> devstate list perfpbxr*CLI> --------------------------------------------------------------------- --- Custom Device States -------------------------------------------- --------------------------------------------------------------------- --- --- Name: 'Custom:notinuse' State: 'NOT_INUSE' --- --------------------------------------------------------------------- --------------------------------------------------------------------- then tried: [default] exten => 8888,hint,Custom:notinuse So when any body dials 8888 would change the devstate back to NOT_INUSE doesn't...

...und one way that worked for me and would like to have some feedback or suggestion of improvments. Below example is for a ?Swedish? cell phone, dont know if it works in the same way for other countries. I could define ?redirecting? numbers for 3 traffic cases when u dial my mobile (073-302 59 75): NOT_INUSE call forward to A INUSE call forward to B in my case 010-602 4975 UNAVAILABLE call forward to C in my case 010-602 4976

One of my sites asked for a way to identify if the person they are calling on another extension is already on another call. To that end, I wrote a bit of code in the dialplan for my extensions that checks to see if the extension they are dialing has a device status that is anything other than NOT_INUSE. If the device is NOT_INUSE, then it dials the call normally. If it has a different status, then it dials using the option m(ringing) where ringing is a musiconhold class that plays a standard ring with a beep at the end so that they have an audible clue that the other person is on a call. Thi...

I'd recommend using DEVICE_STATE On your extension 101, Check the DEVICE_STATE of peer SIP/101, If it's not 'NOT_INUSE' then dial it, Otherwise dial SIP/102 exten => 101,1,ExecIf($["${DEVICE_STATE(SIP/101)}"="NOT_INUSE"]?Dial(SIP/101,40)) same => n,Dial(SIP/102,40,t) same => n,Hangup() On Wed, Feb 25, 2015 at 2:08 PM, ricky gutierrez <xserverlinux at gmail.com&gt...

supported, beside Idle, On call and Ringing ? Can we expect this list to match DEVICE_STATE's one (UNKNOWN | NOT_INUSE | INUSE | BUSY | INVALID | UNAVAILABLE | RINGING | RINGINUSE | ONHOLD) > Might be worth seeing if other phones do the same. > > S > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -...

...,n,Goto(s-${DIALSTATUS},1) > exten => s,n(nofax),Playtones(busy) > exten => s,n,NoOp(NO MODEMS AVAILABLE) > exten => s,n,Wait(20) > exten => s,n,Hangup() > exten => s-ANSWER,1,NoOp(IAXMODEM HANGUP) > exten => s-ANSWER,n,Set(DEVICE_STATE(Custom:iaxmodem${FAX_IDX})=NOT_INUSE) > exten => s-ANSWER,n,Hangup() > exten => _s-.,1,Set(FAX_IDX=${MATH(1+${FAX_IDX},i)}) > exten => _s-.,n,Goto(s,1) > exten => h,1,Set(DEVICE_STATE(Custom:iaxmodem${FAX_IDX})=NOT_INUSE) > > The current state requires me to restart Asterisk almost every day. > I'...