search for: norstar

Hi there! We have an old legacy norstar phone system m8x24-ds ( dr5 ) and a couple of m0x16. It has 5 external analog lines. It has no auto attendant, and no voicemail. So every incoming call is forwarded to a operator, she pick up the phone, talks to the caller and transfer the call to the right extension. We are in Argentina, so buyin...

To All; My current issues is a 5 second delay for call that is being transferred from the Norstar units to the Asterisk servers VIA a PRI. Is their anything that can be done to speed up the transfer on the Norstar. Below is my current phone config. < Norstar1 >----PRI----< Asterisk-1 >----IP-WAN----< Asterisk-2 >---PRI---< Norstar2> The Norstars are MICS 0x32 4.1 sof...

Hi, I have a legacy Norstar system that I'm looking into integrating with my Asterisk setup. My first attempts have worked, which involves a Wildcard X100P FXO card in the * box connected to the Internal ATA (FXS port) on the Norstar system. Calling from SIP -> Norstar works fine, since the SIP caller initiated the...

...sterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Gary Reuter > Sent: Thursday, August 11, 2005 12:59 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] PRI dropped calls w/ asterisk dropped > betweenpstn & norstar > > > I poured over my logs most of the morning. I'm fairly convinced at > this point the disconnect is coming from the Norstar 10 seconds after > the call was initiated. This points to the 'T310' timer, similar to > what is described here: > http://www.cisco.co...

I've noticed a problem with calls to Hangup when talking to my Norstars over channelised T-1 E&M trunk lines - it's been present since I started to fiddle with Asterisk last December and it's still present in 'Asterisk CVS-HEAD-08/13/04-10:37:13'. Specifically, when a call is connected to Asterisk from the Norstar DTI card to my T100p I get the fo...

Does anyone know which signalling protocol works when connecting the output of a NT8B90AL Norstar ATA2 analog terminal adapter to an FXO card? (fxsks, fxsgs, fxsls?) I'm trying to add an Asterisk branch to my Norstar PBX as outlined at http://www.voip-info.org/wiki-Asterisk+Nortel. - Mike

Unfortunatly no on both counts. The arrangement right now has: PSTN Trunks & Stations <-> Nortel Norstar#1 <-CT1-> Asterisk#1 <-IAX2-> Asterisk#2 <-CT1-> Nortel Nortstar#2 <-> Stations The Asterisk boxes provide Voicemail to their sites Norstars and intersite calls over IAX. Local Voicemail works flawlessly at each site but there have been reports of PSTN calls that are in voi...

I'm attempting to use an asterisk box with a Digium TDM01B as voicemail for an existing Meridian/Norstar PBX with an ATA-2 adapter. We're having problems where hangup is not always (but sometimes) detected. It's not detected probably 70% of the time or more. (The users transfer callers to an extension--caller then has to navigate a menu to get to the appropriate user). After doing some...

Out of the blue i started receiving the following error on my PRI line which connects my asterisk server to a Norstar 0x32 key system. The asterisk zaptel.conf file was configure as follows and this config worked for 6 months until friday. Nothing was changed on either system prior to friday. here is teh zaptel.conf span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48 To try to fix t...

All good information, thanks. However this is private network between Asterisk and a Norstar MICS about six feet away. So I'm holding both ends of the link. :-) > -----Original Message----- > From: David Troy [mailto:dave@popvox.com] > Sent: September 16, 2004 4:57 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] No Calle...

Hi, I dropped an asterisk server with a TE405P between a Norstar Meridian PBX and it's PRI PSTN connection. Everything seemed to work fine using a pass-thru-type dialplan configuration... except now we've realised that outbound calls to celphones get dropped upon connect, but not on every call (almost always the first try, but not the second). All othe...

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the question: I wish to put * between the telco and the Nortel PBX. How do I set up dialing out a PRI from * to the Nortel and sending...

...s recently from people who are doing something with Asterisk and a T100P and a Nortel PBX. However it's not clear exactly what they are doing. Does anyone know if it's possible to use a T100P or T400P as a DSX-1 interface to connect to a T1/PRI CO module in a Nortel PBX? We have a Nortel Norstar Modular ICS PBX and I'd like to plug its CO module into an Asterisk server, for interesting reasons. Nortel's ATA/ASM for analog stations are not suitable for use with a softswitch like Asterisk and FXO interfaces. Also, Nortel has no T1 station module, so I think I could only connect A...

What models? Jeff Noxon (jeff-asterisk at planetfall.com) wrote*: > >I just purchased a bunch of Nortel Meridian POTS phones that support >intercom on the 3rd pair. I intend to get it working with Asterisk. >The phones support MWI, have a 3-line display, callerID, call waiting >callerID, 2 lines...very nice. > >On Thu, Feb 27, 2003 at 01:07:19AM -1000, James H. Thompson

At the moment we're not - the email notification from Comedian Mail has been mostly sufficient. I do however have some Dialogic D/42-NS PBX emulation cards and the plan is to use them to set and unset the MWI lamps based on events pushed out of Asterisk. They may be obsolete hardware but they came in real handy for extracting the voicemail from the old StarTalk NAM too. Take a look at the

Sorry, I know it's OT, but does anyone know of a relatively inexpensive headset that is compatible with the Cisco 7960? I've tried the headset off Norstar phones, doesn't seem to work with or without the amp. ------------------------------------------------------------------------ | nate carlson | natecars@natecarlson.com | http://www.natecarlson.com | | depriving some poor village of its idiot since 1981 | ---------------------...

Hi, I'm trying to get my X100P to Dial the following sequence to gain access to speed dial numbers on my Norstar PBX that the X100 is connected to... [FLASH] [*] [0] [22] (where 22 is the speed dial number) But so far I've had no luck, with the following extension:- exten => 922,1,Flash(${DIALOUTANALOG}) exten => 922,2,Dial(${DIALOUTANALOG}/*022) exten => 922,3,Congestion exten => 922,4,Han...

I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed t...

I have a PRI link up and running between Asterisk and a Nortel Norstar MICS v4.1 . I'm having a problem getting the textual Caller Name across the link from Ast to Ns, however numeric Caller ID arrives and displays fine. From Ns to Ast both elements come through fine. I'm forcing dummy values for testing using: exten => s,1,SetCIDName(Test) exten => s...

...ome up and it seems like a good place to start. However, the big name bookstores tell me it'll take up to three weeks, and this project simply can't endure that wait. Does anyone know where it's possible to get a paper copy *quickly*? #2, I'm planning to interface Asterisk with a Norstar MICS via PRI. Can anyone recommend a reference book or site more suited to this task? Thanks and regards, David Stude Receptec, LLC Holly, MI -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050720/db0...