search for: norat

...ID v1.11 Device [PPC USB Card] on usb-0000:00:14.0-7/input0 Feb 17 06:12:52 myhost mtp-probe: checking bus 3, device 41: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7" Feb 17 06:12:52 myhost mtp-probe: bus: 3, device: 41 was not an MTP device I tried using the synchronous, novendor and norating settings, to no avail. I also tried a longer pollinterval but that just makes it take longer to reconnect. Here's my ups.conf: [energit] driver = blazer_usb port = auto desc = "Energit MXE II (Centralion Titan Elite)" vendorid = "06da"...

Hi Artronic art 1000 bl is supported partially by blazer_ser: battery.voltage: 13.40battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.6.3 driver.version.internal: 1.51 input.current.nominal: 4.0 input.frequency: 50.1 input.frequency.nominal: 50 input.voltage: 232.9

On Feb 10, 2015, at 5:24 PM, Miroslav Todorov <miro0218 at yahoo.com> wrote: > Hi Artronic art 1000 bl is supported partially by blazer_ser: > When you say "partially supported", what is not supported? Are any of the values incorrect? -- Charles Lepple clepple at gmail

...nux-2qya:~ # tail -13 /etc/ups/ups.conf [infosec] driver = blazer_usb subdriver = cypress # protocol = mustek vendorid = 0665 productid = 5161 port = auto desc = "Infosec X4" offdelay = 60 ondelay = 70 norating novendor linux-2qya:~ # lsusb Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 045e:0797 Microsoft Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 003 Devi...

When i went to installation ferret in my rails application then i have faced a problem that is look like this ERROR: While executing gem ... (Gem::FilePermissionError) You don''t have write permissions into the /var/lib/gems/1.8 directory. i used this command for ferret install sudo gem install ferret --~--~---------~--~----~------------~-------~--~----~ You received this message

I installed solr search engine in my Rails application when i started server then i found this message execution expired and usr/lib/ruby/1.8/timeout.rb:54:in `rbuf_fill'' /usr/lib/ruby/1.8/timeout.rb:56:in `timeout'' /usr/lib/ruby/1.8/timeout.rb:76:in `timeout'' /usr/lib/ruby/1.8/net/protocol.rb:132:in `rbuf_fill'' /usr/lib/ruby/1.8/net/protocol.rb:116:in

...and secondly (and where we left it previously), how to get > FreeBSD to 'talk' libusb-0.1 or else allow FreeBSD (8.2) and NUT to work > with this USB device? If you're not interested in input.{voltage, current, frequency}.nominal and battery.voltage.nominal you could add the 'norating' flag in your ups.conf: doing so the driver won't send to the UPS the 'F' query, whose answer is causing those messages (i.e. blazer_rating: non numerical value [Ff .0]). There's something weird in the reply from the UPS: while it should be like #nnn.n nnn nnn.n/nn.nn nn.n&l...

...work fine w/ --use-pam & UsePam=yes except for [2] - [2] I found a patch from Darren, but according to a later post it doesn't apply against stock 3.7.1p2. Does anyone have a version that does? Use of -current disturbs me since I'm trying to write up a standards doc that will be norative until a new vulnerability arises or enough other changes take place to warrent upgrade on several hundred servers. - [3] We are currently using 3.4p1 with the BSM patch along with UseLogin=yes for hosts that are BSM enabled. According to one email with no reply, that patch is MIA for 3.7....

...2 at localhost] failed - Driver not connected Apr 4 00:44:10 mail blazer_usb[10804]: Got disconnected by another driver: Device or resource busy Apr 4 00:44:10 mail kernel: [83496.177686] usb 4-2: usbfs: process 10804 (blazer_usb) did not claim interface 0 before use ups.conf: maxstartdelay = 70 norating novendor subdriver = cypress [eaton_1] driver = blazer_usb port = "002" desc = "Eaton NV 2000H" vendorid = 0665 productid = 5161 bus = "003" [eaton_2] driver = blazer_usb port = "002&quot...

Hi Arnaud and NUT team You may recall some time ago, I and a few others posted questions about the above referenced (cheap and cheerful) USB-based UPS - specifically regarding FreeBSD USB support in NUT. The original posting was entitled "Zigor Ebro 650 compatibility". I've since tried the latest Windows port of NUT with my WinXP laptop connected to the Zigor Ebro and finally

System: Cenots Linux 6.9 Application: nut-2.7.5-0.20170613gitb1314c6 [with usb 0.1 from distro] Device: Mustek PowerMust 1060 LCD Comunication log file: dump.txt We are looking at the possibility of successful communicating with this device UPS Mustek PowerMust 1060 LCD. PS: wolfy on the list gives me assistance and i can install any new compiled nut version from sources. Thanks, Catalin.

Building native extensions. This could take a while... ERROR: While executing gem ... (Gem::Installer::ExtensionBuildError) ERROR: Failed to build gem native extension. ruby extconf.rb install ferret creating Makefile make sh: line 1: make: command not found Gem files will remain installed in /Applications/Locomotive2/Bundles/