search for: nonstall

gcc with W=1 reports drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error: no previous prototype for ?gf100_fifo_nonstall_block? [-Werror=missing-prototypes] 451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index) | ^~~~~~~~~~~~~~~~~~~~~~~~~ gf100_fifo_nonstall_block is only used in gf100.c, so it should be static Signed-off-by: Tom Rix <trix at redhat.com> --- drivers/gpu/drm/n...

...ra124-gk20a +- reg: Physical base address and length of the controller's registers. + Must contain two entries: + - first entry for bar0 + - second entry for bar1 +- interrupts: The interrupt outputs from the controller. +- interrupt-names: Must include the following entries: + - stall + - nonstall +- vdd-supply: regulator for supply voltage. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - gpu + - pll +- resets: Must contain an entry for each entry in reset-names. + See...

This series adds support for probing platform devices on Nouveau, as well as the DT bindings for GK20A. It doesn't enable the GPU yet on Tegra boards since a few extra things need to be supported before that. Thanks to the input received for v1, this version is more self-contained and shares less stuff between nouveau_drm and nouveau_platform. The major change is that nouveau_platform is now

...000000 { + compatible = "nvidia,gk20a"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA124_CLK_GPU>, + <&tegra_car TEGRA124_CLK_PLL_P_OUT5>; + clock-names = "gpu", "pll"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + status = "disabled"; + }; + timer at 0,6000500...

...,12 @@ nouveau_fence_context_new(struct nouveau_channel *chan, struct nouveau_fence_cha &args.base, sizeof(args), &fctx->event); WARN_ON(ret); + + /* + * Always allow non-stall irq events - previously this code tried to + * enable/disable them, but that just seems racy as nonstall irqs are unlatched. + */ + nvif_event_allow(&fctx->event); } int @@ -247,8 +225,7 @@ nouveau_fence_emit(struct nouveau_fence *fence) return -ENODEV; } - if (nouveau_fence_update(chan, fctx)) - nvif_event_block(&fctx->event); + nouveau_fence_update(chan, fctx); l...

This patch series is the final (?) step towards the initial support of GK20A, allowing it to be probed and used (currently at a very slow speed, and for offscreen rendering only) on the Jetson TK1 and Venice 2 boards. The main piece if the first patch which adds platform devices probing support to Nouveau. There are probably lots of things that need to be discussed about it, e.g.: * The way the

...ruct nouveau_channel *chan, struct nouveau_fence_cha > &args.base, sizeof(args), &fctx->event); > > WARN_ON(ret); > + > + /* > + * Always allow non-stall irq events - previously this code tried to > + * enable/disable them, but that just seems racy as nonstall irqs are unlatched. > + */ > + nvif_event_allow(&fctx->event); > } > > int > @@ -247,8 +225,7 @@ nouveau_fence_emit(struct nouveau_fence *fence) > return -ENODEV; > } > > - if (nouveau_fence_update(chan, fctx)) > - nvif_event_block(&fctx-...

This series adds support for probing platform devices on Nouveau, as well as the DT bindings for GK20A. It doesn't enable the GPU yet on Tegra boards since a few extra things need to be supported before that. This version is mostly identical to v2 but fixes an important issue: the drvdata must be set to the drm_device for sysfs to work, so the platform device structure now includes the

...IZE, + PCI_DMA_BIDIRECTIONAL); +} + +int +nv_device_get_irq(struct nouveau_device *device, bool stall) +{ + if (nv_device_is_pci(device)) { + return device->pdev->irq; + } else { + return platform_get_irq_byname(device->platformdev, + stall ? "stall" : "nonstall"); + } +} + static struct nouveau_oclass nouveau_device_oclass = { .handle = NV_ENGINE(DEVICE, 0x00), @@ -457,8 +523,8 @@ nouveau_device_oclass = { }; int -nouveau_device_create_(struct pci_dev *pdev, u64 name, const char *sname, - const char *cfg, const char *dbg, +nouveau_dev...

On 12/02/14 05:38, Alexandre Courbot wrote: > Upcoming mobile Kepler GPUs (such as GK20A) use the platform bus instead > of PCI to which Nouveau is tightly dependent. This patch allows Nouveau > to handle platform devices by: > > - abstracting PCI-dependent functions that were typically used for > resource querying and page mapping, > - introducing a nv_device_is_pci()

On Mon, Feb 10, 2014 at 8:50 PM, Thierry Reding <thierry.reding at gmail.com> wrote: > On Mon, Feb 10, 2014 at 02:53:00PM +0900, Alexandre Courbot wrote: > [...] >> diff --git a/drivers/gpu/drm/nouveau/core/engine/device/base.c b/drivers/gpu/drm/nouveau/core/engine/device/base.c > [...] >> +resource_size_t >> +nv_device_resource_start(struct nouveau_device *device,

...IZE, + PCI_DMA_BIDIRECTIONAL); +} + +int +nv_device_get_irq(struct nouveau_device *device, bool stall) +{ + if (nv_device_is_pci(device)) { + return device->pdev->irq; + } else { + return platform_get_irq_byname(device->platformdev, + stall ? "stall" : "nonstall"); + } +} + static struct nouveau_oclass nouveau_device_oclass = { .handle = NV_ENGINE(DEVICE, 0x00), @@ -489,3 +555,37 @@ done: mutex_unlock(&nv_devices_mutex); return ret; } + +int +nouveau_device_platform_create_(struct platform_device *pdev, u64 name, + const char *sname, c...