search for: natoma

...; what do you get when you boot the VM (I imagine with supergrub2 you described) and run this lspci lspci -kn in particular in respect with scsi devices ad kernel modules used eg in a VM of mine under oVirt [root at ractorshe ~]# lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB...

Hi, One of the I noticed during migration from XM toolchain to XL in PCI Pass-through was that we used to specify target bdf in HVM guest as pci = [ ''0000:07:11.6=0@1a'' ] However with XL, it now seems like this is the correct syntax: pci = [ ''0000:07:11.6@1a'' ] Is that correct? I''ve verified that it works but what about zero in

...ine with supergrub2 you > described) and run this > > lspci > lspci -kn > > in particular in respect with scsi devices ad kernel modules used > eg in a VM of mine under oVirt > > [root at ractorshe ~]# lspci > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton > II] > 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton > II] (rev 01) > 00:01.3 Bridge: In...

On 5/5/2017 1:19 ??, Gianluca Cecchi wrote: > Could you verify, if /dev/sda is your boot disk, with the command > > fdisk -l /dev/sda > ? It's /dev/vda in my case: # fdisk -l /dev/vda Disk /dev/vda: 21.5 GB, 21474836480 bytes, 41943040 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512

...7,1,0". None of them seemed to work either. My virtual AsteriskNow machine is not yet running (and I've tried restarting xend at this point), but when I start the machine, no card is visible: [admin at 192-168-6-94 ~]$ lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.2 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01) 00:01.3 USB Controller: Intel Corporation 82371SB PIIX3 USB [Natom...

On Wed, Jun 5, 2013 at 9:58 PM, upen <upendra.gandhi at gmail.com> wrote: > I copied pxelinux.cfg/default to pxelinux.cfg/<IP to HEX> and it looks this > step resolved the earlier error. Next I get failed to load com32 file > vesamenu.c32 while that file exists in /tftplinux/linux-install. Is vesamenu.c32 from 5.10? -- -Gene

...39;0000:07:11.6=0@1a'' ] XL - pci = [ ''0000:07:11.6@1a'' ] In the guest VM we see that PCI device is getting 0 function in both the cases however, it may not work the same way in the future. *lspci -nn* 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 01)...

...t; >> client is connected to can perform port mirroring to see what is >> >> received? >> > >> > >> > DHCPD and TFTP server on Redhat 5.9 running as Virtualbox guest. >> > >> > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev >> > 02) >> > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton >> > II] >> > 00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev >> > 01) >> > 00:02.0 VGA compatible controller: InnoTek Systemberatun...

Hello, I have a big problem with my servers. I have 4 NIC on all my KVM Servers but the most time on a start (restart) I lost one NIC? It is not always the same, but this two are virtio NICs. with ifup eth0(1) the system say,I have no configured eth0 or eth1 file ? Can any tell me what I can do? thank's for a answer NetworkManager is disabled. -- mit freundlichen Gr??en / best regards,

...y network card with lspci (but when I install Debian Lenny, there is a network card): root@sd-29499:/etc/xen# ls -lah /usr/download/ -rw-r--r-- 1 root root 646M 22 mars 17:27 debian-6.0.1a-amd64-CD-1.iso root@sd-29499:/etc/xen# lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01) 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 00:03.0...

...TP server? Any chance that the physical switch that the >> client is connected to can perform port mirroring to see what is >> received? > > > DHCPD and TFTP server on Redhat 5.9 running as Virtualbox guest. > > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > 00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) > 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox > Graphics Adapter > 00:04.0 System periphera...

...fig/network/ifcfg-eth* > cat /etc/sysconfig/network/ifcfg-eth* > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos lspci; -00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 00:02.0 VGA compatible controller: Red Hat, Inc. QXL paravirtual gra...

...ce - (4:0.0) is indeed hidden in Dom0 but *not assigned* to the HVM, realtek card shows up at (4:0.0) in HVM''s lspci as below. Note that my dom0 kernel config has CONFIG_XEN_PCIDEV_BACKEND_PASS=y which I believe is *non-default*. 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.2 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01) 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 00:03.0 Clas...

...ow can I check the ones what Qemu using? (IDE/SATA/SCSI/Virtio) One easy way to find out is to use lspci -nn in a Linux host running Qemu with your target configuration. For instance, for the IDE bus, you'll get something like: 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] -- Pierre Schweitzer <pierre@reactos.org> System & Network Administrator Senior Kernel Developer ReactOS Deutschland e.V.

...BEL: Label for provider acd0 is iso9660/FreeBSD_Install. Trying to mount root from ufs:/dev/ad0s1a FreeBSD 7.0 pciconf -vl: hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x12378086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82440/1FX 440FX (Natoma) System Controller' class = bridge subclass = HOST-PCI isab0@pci0:0:1:0: class=0x060100 card=0x00000000 chip=0x70008086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82371SB PIIX3 PCI-to-ISA Bridge (Triton II)' class = br...

...eeBSD_Install. > Trying to mount root from ufs:/dev/ad0s1a > > > FreeBSD 7.0 pciconf -vl: > hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x12378086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82440/1FX 440FX (Natoma) System Controller' > class = bridge > subclass = HOST-PCI > isab0@pci0:0:1:0: class=0x060100 card=0x00000000 chip=0x70008086 > rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = '82371SB PIIX3 PCI-to-ISA Bridge (Triton II)' &gt...

...t class v2.0-870. [ 12.206676] iscsi: registered transport (tcp) Could not read fw values. Aug 14 18:02:36 g-pvops syslogd 1.5.0: restart. Running in HVM context on Xen v4.2. [1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 0.10 /dev/sr0 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.2 USB Controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB...

...l memory = 125222912 (122288K bytes) Preloaded elf kernel "kernel" at 0xc0548000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 Correcting Natoma config for non-SMP pcib1: <IBM 82351 PCI-PCI bridge> at device 13.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Cirrus Logic GD5430 SVGA controller> at 6.0 tl0: <Compaq Netelligent 10/100 Proliant> port 0x6480-0x648f mem 0x40001500-0x4000150f irq 5 at device 7.0 on pci1 tl0: Eth...

Hi, The error line is: *** STOP: 0x0000007B (0xF789AA94, 0xC0000034, 0x00000000, 0x00000000) Nothing more! (Of course there are some inrelevant text line about chkdsk, etc.) > Basically, what's required is the "STOP:" line + the image where it > fails (so, the line below). Image being likely to be NTOSKRNL.EXE > Nothing about NTOSKRNL.EXE on the blue screen! > >

...i_dev *dev) +static void quirk_alimagik(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -267,7 +267,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimag * Natoma has some interesting boundary conditions with Zoran stuff * at least */ -static void __devinit quirk_natoma(struct pci_dev *dev) +static void quirk_natoma(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_NATOMA)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfe...