Displaying 20 results from an estimated 271 matches for "myups".
2014 Oct 01
2
Socomec ITYS 3000 + Netvision upsmon output
Hi,
I have UPS Socomec ITYS 3000 with Netvision card.
OS is Centos 6.5 64-bit.
NUT installed with yum,.
nut-2.6.5-2.el6.x86_64
nut-client-2.6.5-2.el6.x86_64
Why is ups.status empty?
Here is upsc output:
upsc myups at localhost
battery.charge: 97.00
battery.runtime: -60.00
battery.voltage: -0.10
device.mfr: Net Vision v6.01 (SN 0101414290)
device.model: ITYS 3 kVA
device.serial: 3I14450043
device.type: ups
driver.name: snmp-ups
driver.parameter.mibs: netvision
driver.parameter.pollfreq: 15
driver.parameter.po...
2005 Jun 02
0
"UPS myups@localhost is unavailable" from upsmon
...imagine this question must have been answered previously on the
list, but I can't search for the answer because the archives are gone.
Executive summary: I am trying to install and configure nut 2.0.1 on
Fedora Core. I have a SmartUPS Pro plugged into a USB port. Upsmon
is logging "UPS myups@localhost is unavailable" to syslog and via wall
when it starts up and periodically afterwards. I don't understand
why, since upsd says that upsmon is successfully connecting to upsd.
Here's what I see when I run "service ups start":
Starting hidups: Network UPS Tools: H...
2007 Oct 18
1
problems with nut - openSUSE 10.3
...ured it as mentioned in /usr/share/doc/packages/nut/README.SUSE.
on starting nut using "rcupsd start" i get following:
#
Starting NUT UPS monitor
done
Broadcast Message from root at pane
(somewhere) at 22:27 ...
Communications with UPS myups at localhost lost
Broadcast Message from root at pane
(somewhere) at 22:27 ...
UPS myups at localhost is unavailable
#
syslog:
Oct 18 22:27:29 pane upsmon[13329]: Startup successful
Oct 18 22:27:29 pane upsmon[13330]: UPS [myups at localhost]: connect
failed: Connection failure: Connecti...
2015 Oct 26
2
The system doesn't shutdown
...i7 upsd[2226]: fopen /var/lib/ups/upsd.pid: No such file or
directory
Oct 26 21:02:56 i7 upsd[2226]: listening on ::1 port 3493
Oct 26 21:02:56 i7 upsd[2226]: listening on ::1 port 3493
Oct 26 21:02:56 i7 upsd[2226]: listening on 127.0.0.1 port 3493
Oct 26 21:02:56 i7 upsd[2226]: Connected to UPS [myups]: usbhid-ups-myups
Oct 26 21:02:56 i7 upsd[2226]: listening on 127.0.0.1 port 3493
Oct 26 21:02:56 i7 upsd[2226]: Connected to UPS [myups]: usbhid-ups-myups
Oct 26 21:02:56 i7 upsd[2227]: Startup successful
Oct 26 21:02:56 i7 upsmon[2228]: fopen /var/run/upsmon.pid: No such file or
directory
Oct 26...
2006 Sep 04
5
Smart-UPS with SuSE 9.0/Nut
...done
-> Starting upsd:
Network UPS Tools upsd 2.0.2
done
-> Starting upsmon:
Network UPS Tools upsmon 2.0.2
UPS: myups@10.133.1.51 (master) (power value 1)
Using power down flag file /etc/killpower
stat /etc/ups/upsd.conf: No such file or directory
Broadcast Message from nobody@server
(somewhere) at 15:35 ...
Communications with UPS myups@10.133.1.51 lost...
2015 Oct 14
2
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
...own.return, [NULL])
> instcmd: FAILED
> Shutdown failed!
> Driver failed to start (exit status=1)
>
> This time /var/log/syslog doesn't register anything about the UPS after
> issuing the command above. Instead, It logged some errors after a
> upscmd -u admin -p mypass myups shutdown.return 360
>
> These logs are reported in my second mail of this thread.
> Oct 6 19:03:07 debianBunker upsmon[3115]: UPS myups at localhost on
> battery
> Oct 6 19:03:07 debianBunker upsd[2946]: Instant command: admin at
> 127.0.0.1 did shutdown.return with v...
2015 Oct 26
2
The system doesn't shutdown
Hello,
I have been following the details in this article to configure my UPS:
http://rogerprice.org/NUT.html
However the system won't shutdown although file permissions look ok:
ls -alF /usr/sbin/ups*
-rwxr--r-- 1 upsd daemon 64984 Oct 15 2014 /usr/sbin/upsd*
-rwxr--r-- 1 upsd daemon 48584 Oct 15 2014 /usr/sbin/upsmon*
-rwxr--r-- 1 upsd daemon 31536 Oct 15 2014 /usr/sbin/upssched*
2020 Jul 07
2
New UPS to the DB
Hi, I have an OEM of KStar UDC9101S which is Megatec protocol rs232 capable
unit.
So I use blazer_ser protocol=megatec /dev/ttyUSB0 with no issue to get NUT
running.
Please direct me what command should I issue to collect the data in order
to include the UPS to device database?
P.S. tryed /lib/nut/blazer_ser -DD... but no difference from a regular
output has being added by the driver.
2007 Mar 26
1
Hint for upgrade from 2.0.3 to 2.0.5
After updating from NUT 2.0.3 to 2.0.5 I got this error from upsd
during startup:
Can't connect to UPS [myups] (myups): No such file or directory
The problem was that newhidups created a pipe on
/var/run/nut/newhidups-auto while upsd was looking for
/var/run/nut/myups.
The solution to the problem was to add the option "-a myups" to the
newhidups command line in the init script. This option was...
2020 Aug 03
2
Synology NAS is shutting down Ubuntu servers after very brief power outage (fwd)
...but am
> still a little confused on how to do this exactly.
This assumes that you use the Bash shell in your default environment. It will
need adaption if you use Dash.
In .bashrc define function getUPSstatus
# Update variable UPSstatus and export to environment
# Usage getUPSstatus <myups>
function getUPSstatus {
export UPSstatus="[$( upsc $1 ups.status 2>/dev/null )]:$( upsc $1 battery.charge 2>/dev/null )"
}
The SHUTDOWNCMD declaration now simplifies to
SHUTDOWNCMD "getUPSstatus <myups> ; logger -t upsmon.conf \"UPS status is $UPSstat...
2015 Oct 14
2
No power cycle after shutdown on Atlantis Land OnePower A03-S1001
On Wed, 14 Oct 2015, Davide Baldini wrote:
> the full output of upsc ${myups} is at https://pastebin.mozilla.org/8849188 ;
> in particular:
>
> ups.delay.shutdown: 30
> ups.delay.start: 180
>
> However, the UPS does not shut down, not immediately nor well after the
> timeout of the command: upscmd -u admin -p mypass myups shutdown.return 360
What do...
2007 Oct 17
2
usbhid-ups on openSUSE 10.3 does not see MGE Ellipse 1500
...ar List, The driver usbhid-ups does not detect my MGE Ellipse 1500.
I'm running openSuSE Linux 10.3, kernel 2.6.22 with mgeups-psp-3.0.4-2,
nut-2.2.0-20 installed from MGE's rpm's. (Merci MGE!)
lsusb shows:
Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS
/etc/ups/ups.conf says:
[myups]
driver = usbhid-ups
port = auto
desc = "Local UPS"
vendorid = 0463
I launched upsdrvctl in debug mode:
pastis: # /usr/lib/ups/driver/upsdrvctl -DDDDD start
Network UPS Tools - UPS driver controller 2.2.0-
Starting UPS: myups
exec: /usr/lib/ups/driver/usb...
2020 Aug 04
2
Synology NAS is shutting down Ubuntu servers after very brief power outage (fwd)
On Mon, 3 Aug 2020, Todd Benivegna wrote:
> Thank you! Sorry for another bonehead question…. Do I replace <myups> with
> the IP address of the NUT Server/Synology? I’m assuming I would use this
> version for use in Dash with Ubuntu, correct?
Yes, you replace <myups> with the address of your UPS, for example
"ups at 192.168.x.y". Are you using Dash or Bash? If it's Dash, the...
2019 May 12
2
nut vs ups fail
On Sunday 12 May 2019 02:41:02 pm Charles Lepple wrote:
> /lib/nut/usbhid-ups -a myups -DD
gene at coyote:~$ /lib/nut/usbhid-ups -a myups -DD
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
Can't open /etc/nut/ups.conf: Can't open /etc/nut/ups.conf: Permission
denied
lemme see who owns that. huh? amandabackup:nut what the h? Who is
suppose...
2016 May 13
3
Low Battery event not occurring
...a TrippLite SMART2200RM2UN UPS. I have installed and configured NUT as instructed on the website, and am able to monitor the status of the UPS without much problem. The only problem I am seeing is that I cannot get the machine to actually send a Low Battery ( LB ) signal.
When I run "upsc myups at localhost", the "battery.charge.low" is "10". My current "battery.charge" is "6". However, when I type "upsc myups at localhost ups.status", it only shows OB and DISCHRG, not LB.
If I understand the NUT process correctly, it looks for th...
2019 Dec 09
2
new mobo, ups doesn't connect
...t; > seem to want to talk to it, and the original name _(usbhid-ups)
> > doesn't work from new mobo. Oh wait, I can't spell. But that didn't
> > help, and a restart gets this error:
>
> ...
>
> > Dec 07 18:49:46 coyote upsd[3259]: Can't connect to UPS [myups]
> > (hidraw-myups): No such file or directory
>
> Hi Gene,
>
> Might be simpler to start with the contents of your /etc/nut/ups.conf
> file?
>
> Mine looks like this:
>
> [apc]
> driver = usbhid-ups
> port = auto # USB
>
> Yours should probably look s...
2007 Jan 02
5
Cpsups driver with a CyberPower OP1000E
...Warning: This is an experimental driver.
Some features may not function correctly.
Detected MicroDowell B.Box BP 1000 2.102 on /dev/ttyUSB0
# /usr/local/ups/sbin/upsd
Network UPS Tools upsd 2.0.5-pre1
/var/state/ups is world readable
/usr/local/ups/etc/upsd.conf is world readable
Connected to UPS [myups]: myups
/usr/local/ups/etc/upsd.users is world readable
Synchronizing...done
# /usr/local/ups/bin/upsc myups@localhost ups.status
OL
# /usr/local/ups/bin/upsc myups@localhost
battery.charge: 100.0
battery.runtime: 36:00
driver.name: cpsups
driver.parameter.port: /dev/ttyUSB0
driver.version: 2.0.5-p...
2020 Jun 22
5
Low Battery Problems
On Monday 22 June 2020 09:50:50 Larry Fahnoe wrote:
> On Mon, Jun 22, 2020 at 8:27 AM Gene Heskett <gheskett at shentel.net>
wrote:
> > > On Jun 22, 2020, at 8:52 AM, Gene Heskett wrote:
> > > > pi at rpi4:~ $ upscmd myups *test.battery.start.quick*
> > > > Username (pi):
> > > > Password:
> > > > Unexpected response from upsd: ERR ACCESS-DENIED
> >
> > [pi]
> > password = xxxxxxxxxxxxx
> > instcmds = *test.battery.s...
2016 May 13
0
Low Battery event not occurring
I here is some information I could have provided previously. Here is what I am seeing:
====================================================================
Broadcast message from nut at localhost.localdomain (Fri May 13 22:31:35 2016):
UPS myups at localhost on battery
upsc myups at localhost
battery.charge: 3
battery.charge.low: 10
battery.charge.warning: 30
battery.runtime: 93
battery.temperature: 32.9
battery.type: PbAC
battery.voltage: 46.4
battery.voltage.nominal: 48.0
device.mfr: Tripp Lite
device.model: TRIPP LITE SMART2200RM2UN
dev...
2011 Jun 02
2
[HCL] Hardware Compatibility List - PowerWalker VI 850 LCD
...voltage.nominal: 220
output.voltage: 228.2
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 63
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665
upsrw Output (I can confirm that the username and password were correct):
$ upsrw -s beeper.status=disabled myups
Username (backend): xxxxxxx
Password:
Unexpected response from upsd: ERR ACCESS-DENIED
upscmd Output (as above username and password were correct):
upscmd myups beeper.toggle
Username (backend): xxxxxxx
Password:
Unexpected response from upsd: ERR ACCESS-DENIED
Shutdown testing sequence:
Sorry, I...