search for: myup

Hi, I have UPS Socomec ITYS 3000 with Netvision card. OS is Centos 6.5 64-bit. NUT installed with yum,. nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Why is ups.status empty? Here is upsc output: upsc myups at localhost battery.charge: 97.00 battery.runtime: -60.00 battery.voltage: -0.10 device.mfr: Net Vision v6.01 (SN 0101414290) device.model: ITYS 3 kVA device.serial: 3I14450043 device.type: ups driver.name: snmp-ups driver.parameter.mibs: netvision driver.parameter.pollfreq: 15 driver.parameter.p...

...imagine this question must have been answered previously on the list, but I can't search for the answer because the archives are gone. Executive summary: I am trying to install and configure nut 2.0.1 on Fedora Core. I have a SmartUPS Pro plugged into a USB port. Upsmon is logging "UPS myups@localhost is unavailable" to syslog and via wall when it starts up and periodically afterwards. I don't understand why, since upsd says that upsmon is successfully connecting to upsd. Here's what I see when I run "service ups start": Starting hidups: Network UPS Tools:...

...ured it as mentioned in /usr/share/doc/packages/nut/README.SUSE. on starting nut using "rcupsd start" i get following: # Starting NUT UPS monitor done Broadcast Message from root at pane (somewhere) at 22:27 ... Communications with UPS myups at localhost lost Broadcast Message from root at pane (somewhere) at 22:27 ... UPS myups at localhost is unavailable # syslog: Oct 18 22:27:29 pane upsmon[13329]: Startup successful Oct 18 22:27:29 pane upsmon[13330]: UPS [myups at localhost]: connect failed: Connection failure: Connect...

...i7 upsd[2226]: fopen /var/lib/ups/upsd.pid: No such file or directory Oct 26 21:02:56 i7 upsd[2226]: listening on ::1 port 3493 Oct 26 21:02:56 i7 upsd[2226]: listening on ::1 port 3493 Oct 26 21:02:56 i7 upsd[2226]: listening on 127.0.0.1 port 3493 Oct 26 21:02:56 i7 upsd[2226]: Connected to UPS [myups]: usbhid-ups-myups Oct 26 21:02:56 i7 upsd[2226]: listening on 127.0.0.1 port 3493 Oct 26 21:02:56 i7 upsd[2226]: Connected to UPS [myups]: usbhid-ups-myups Oct 26 21:02:56 i7 upsd[2227]: Startup successful Oct 26 21:02:56 i7 upsmon[2228]: fopen /var/run/upsmon.pid: No such file or directory Oct 2...

...done -> Starting upsd: Network UPS Tools upsd 2.0.2 done -> Starting upsmon: Network UPS Tools upsmon 2.0.2 UPS: myups@10.133.1.51 (master) (power value 1) Using power down flag file /etc/killpower stat /etc/ups/upsd.conf: No such file or directory Broadcast Message from nobody@server (somewhere) at 15:35 ... Communications with UPS myups@10.133.1.51 lost...

...own.return, [NULL]) > instcmd: FAILED > Shutdown failed! > Driver failed to start (exit status=1) > > This time /var/log/syslog doesn't register anything about the UPS after > issuing the command above. Instead, It logged some errors after a > upscmd -u admin -p mypass myups shutdown.return 360 > > These logs are reported in my second mail of this thread. > Oct 6 19:03:07 debianBunker upsmon[3115]: UPS myups at localhost on > battery > Oct 6 19:03:07 debianBunker upsd[2946]: Instant command: admin at > 127.0.0.1 did shutdown.return with...

Hello, I have been following the details in this article to configure my UPS: http://rogerprice.org/NUT.html However the system won't shutdown although file permissions look ok: ls -alF /usr/sbin/ups* -rwxr--r-- 1 upsd daemon 64984 Oct 15 2014 /usr/sbin/upsd* -rwxr--r-- 1 upsd daemon 48584 Oct 15 2014 /usr/sbin/upsmon* -rwxr--r-- 1 upsd daemon 31536 Oct 15 2014 /usr/sbin/upssched*

Hi, I have an OEM of KStar UDC9101S which is Megatec protocol rs232 capable unit. So I use blazer_ser protocol=megatec /dev/ttyUSB0 with no issue to get NUT running. Please direct me what command should I issue to collect the data in order to include the UPS to device database? P.S. tryed /lib/nut/blazer_ser -DD... but no difference from a regular output has being added by the driver.

After updating from NUT 2.0.3 to 2.0.5 I got this error from upsd during startup: Can't connect to UPS [myups] (myups): No such file or directory The problem was that newhidups created a pipe on /var/run/nut/newhidups-auto while upsd was looking for /var/run/nut/myups. The solution to the problem was to add the option "-a myups" to the newhidups command line in the init script. This option was...

...but am > still a little confused on how to do this exactly. This assumes that you use the Bash shell in your default environment. It will need adaption if you use Dash. In .bashrc define function getUPSstatus # Update variable UPSstatus and export to environment # Usage getUPSstatus <myups> function getUPSstatus { export UPSstatus="[$( upsc $1 ups.status 2>/dev/null )]:$( upsc $1 battery.charge 2>/dev/null )" } The SHUTDOWNCMD declaration now simplifies to SHUTDOWNCMD "getUPSstatus <myups> ; logger -t upsmon.conf \"UPS status is $UPSsta...

On Wed, 14 Oct 2015, Davide Baldini wrote: > the full output of upsc ${myups} is at https://pastebin.mozilla.org/8849188 ; > in particular: > > ups.delay.shutdown: 30 > ups.delay.start: 180 > > However, the UPS does not shut down, not immediately nor well after the > timeout of the command: upscmd -u admin -p mypass myups shutdown.return 360 What d...

...ar List, The driver usbhid-ups does not detect my MGE Ellipse 1500. I'm running openSuSE Linux 10.3, kernel 2.6.22 with mgeups-psp-3.0.4-2, nut-2.2.0-20 installed from MGE's rpm's. (Merci MGE!) lsusb shows: Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS /etc/ups/ups.conf says: [myups] driver = usbhid-ups port = auto desc = "Local UPS" vendorid = 0463 I launched upsdrvctl in debug mode: pastis: # /usr/lib/ups/driver/upsdrvctl -DDDDD start Network UPS Tools - UPS driver controller 2.2.0- Starting UPS: myups exec: /usr/lib/ups/driver/us...

On Mon, 3 Aug 2020, Todd Benivegna wrote: > Thank you!  Sorry for another bonehead question…. Do I replace <myups> with > the IP address of the NUT Server/Synology?  I’m assuming I would use this > version for use in Dash with Ubuntu, correct? Yes, you replace <myups> with the address of your UPS, for example "ups at 192.168.x.y". Are you using Dash or Bash? If it's Dash, th...

On Sunday 12 May 2019 02:41:02 pm Charles Lepple wrote: > /lib/nut/usbhid-ups -a myups -DD gene at coyote:~$ /lib/nut/usbhid-ups -a myups -DD Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 Can't open /etc/nut/ups.conf: Can't open /etc/nut/ups.conf: Permission denied lemme see who owns that. huh? amandabackup:nut what the h? Who is suppos...

...a TrippLite SMART2200RM2UN UPS. I have installed and configured NUT as instructed on the website, and am able to monitor the status of the UPS without much problem. The only problem I am seeing is that I cannot get the machine to actually send a Low Battery ( LB ) signal. When I run "upsc myups at localhost", the "battery.charge.low" is "10". My current "battery.charge" is "6". However, when I type "upsc myups at localhost ups.status", it only shows OB and DISCHRG, not LB. If I understand the NUT process correctly, it looks for t...

...t; > seem to want to talk to it, and the original name _(usbhid-ups) > > doesn't work from new mobo. Oh wait, I can't spell. But that didn't > > help, and a restart gets this error: > > ... > > > Dec 07 18:49:46 coyote upsd[3259]: Can't connect to UPS [myups] > > (hidraw-myups): No such file or directory > > Hi Gene, > > Might be simpler to start with the contents of your /etc/nut/ups.conf > file? > > Mine looks like this: > > [apc] > driver = usbhid-ups > port = auto # USB > > Yours should probably look...

...Warning: This is an experimental driver. Some features may not function correctly. Detected MicroDowell B.Box BP 1000 2.102 on /dev/ttyUSB0 # /usr/local/ups/sbin/upsd Network UPS Tools upsd 2.0.5-pre1 /var/state/ups is world readable /usr/local/ups/etc/upsd.conf is world readable Connected to UPS [myups]: myups /usr/local/ups/etc/upsd.users is world readable Synchronizing...done # /usr/local/ups/bin/upsc myups@localhost ups.status OL # /usr/local/ups/bin/upsc myups@localhost battery.charge: 100.0 battery.runtime: 36:00 driver.name: cpsups driver.parameter.port: /dev/ttyUSB0 driver.version: 2.0.5-...

On Monday 22 June 2020 09:50:50 Larry Fahnoe wrote: > On Mon, Jun 22, 2020 at 8:27 AM Gene Heskett <gheskett at shentel.net> wrote: > > > On Jun 22, 2020, at 8:52 AM, Gene Heskett wrote: > > > > pi at rpi4:~ $ upscmd myups *test.battery.start.quick* > > > > Username (pi): > > > > Password: > > > > Unexpected response from upsd: ERR ACCESS-DENIED > > > > [pi] > > password = xxxxxxxxxxxxx > > instcmds = *test.battery....

I here is some information I could have provided previously. Here is what I am seeing: ==================================================================== Broadcast message from nut at localhost.localdomain (Fri May 13 22:31:35 2016): UPS myups at localhost on battery upsc myups at localhost battery.charge: 3 battery.charge.low: 10 battery.charge.warning: 30 battery.runtime: 93 battery.temperature: 32.9 battery.type: PbAC battery.voltage: 46.4 battery.voltage.nominal: 48.0 device.mfr: Tripp Lite device.model: TRIPP LITE SMART2200RM2UN de...

...voltage.nominal: 220 output.voltage: 228.2 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 63 ups.productid: 5161 ups.status: OL ups.type: offline / line interactive ups.vendorid: 0665 upsrw Output (I can confirm that the username and password were correct): $ upsrw -s beeper.status=disabled myups Username (backend): xxxxxxx Password: Unexpected response from upsd: ERR ACCESS-DENIED upscmd Output (as above username and password were correct): upscmd myups beeper.toggle Username (backend): xxxxxxx Password: Unexpected response from upsd: ERR ACCESS-DENIED Shutdown testing sequence: Sorry,...