Displaying 20 results from an estimated 45 matches for "mxps".
Did you mean:
maps
2007 Mar 11
1
Problem in Mounting Exaclibur 4GB USB Pen Drive on Centos4.0
...-1:1.0/host2/target2:0:0/2:0:0:0
sg3-utils are also installed on the system but sg_scan -i returns nothing
Output of /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS=...
2006 Jan 16
0
USB Problem
...in.
I am running an up to date Centos 4.2 albeit with the 2.6.9-27 SMP
kernel. Here are the devices on the USB:
# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 27/900 us ( 3%), #Int= 2, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.9-27.ELsmp ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:02:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS=...
2013 Oct 29
1
c6.4: D-Link USB network device (2001:1a02) not work.
Hi, I have plug in this USB network device:
> Bus 001 Device 002: ID 2001:1a02 D-Link Corp.
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=2001 ProdID=1a02 Rev= 0.01
> S: Manufacturer=D-Link
> S: Product=DUB-E100
> S: SerialNumber=E5ECEB
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=200mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=(none)
> E: Ad=81(I) Atr=03(Int.)...
2012 Oct 04
1
APC Smart-UPS 1200
...Is the subject UPS model supported? I believe so, but I don't have a unit to test with. Any comments on this model? I'm trying to advise a colleague. Thank you, as always.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=051d ProdID=0003 Rev= 1.06
S: Manufacturer=American Power Conversion
S: Product=Smart-UPS 1200 FW:UPS 09.2 / ID=20
S: SerialNumber=AS1203239749
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(...
2005 Jul 12
1
Tripplite and newhidups
...)
Opening new device (0000/0000)
found 0 (-1)
No USB/HID UPS found
stuart@tyro:~+ cat /proc/bus/usb/devices=20
T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 MxC=
h=3D 2
B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06
S: Manufacturer=3DLinux 2.6.10 uhci_hcd
S: Product=3DIntel Corp. 82801BA/BAM USB (Hub #2)
S: SerialNumber=3D0000:00:1f.4
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3Dc0 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00...
2006 Dec 01
1
cyberpower 685avr problems with FC5
...39;t seem to get newhidups to detect my UPS..
i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling
my own)
here is the entry for the UPS in /proc/bus/usb/devices
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0764 ProdID=0501 Rev= 0.01
S: Manufacturer=CPS
S: Product=UPS BF700
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
trimmed output of:
# newhidups -DD -u root -x ve...
2005 Sep 26
2
Help with USB support for a Kebo UPS-650D
...s the Kebo ones.
I have been able to get Linux to detect the USB device. Catting
/proc/bus/usb/devices provides the following output:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-1.770_FC3smp uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(I...
2005 Dec 18
1
psp on SuSE 10.0: free(): invalid pointer
...-2.0.2-4
- Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz.
lsusb shows:
Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS
less /proc/bus/usb/devices shows for bus 2 device 3:
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0463 ProdID=ffff Rev= 0.01
S: Manufacturer=MGE UPS SYSTEMS
S: Product=ellipse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms
I followed the User's Guide for this...
2006 Jun 07
3
MGE Evolution, USB and linux
...wMaxPacketSize = 0008
bInterval = 14
--------------------------------------------------
cat /proc/bus/usb/devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f88bb000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01...
2006 Apr 20
1
Powerware 3105 - SuSE 10.0
...-
user = nut
[pw3105]
driver = bcmxcp_usb
port = auto
----------------------------------------------
Other related information
----------- cat /proc/bus/usb/devices --------------------
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0592 ProdID=0002 Rev= 0.80
S: Manufacturer=Powerware
S: Product=Powerware UPS
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms
------------------------------------------...
2005 Sep 23
11
trying to use powerware 3110 USB with NUT
Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says
this
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=06da ProdID=0002 Rev= 0.01
S: Manufacturer=POWERWARE
S: Product=Powerware UPS
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms
why does it say driver=none? how do i get it to...
2011 Mar 31
0
reliance netconnect as on a Linux system ( centos5.5 ) Modem not responding.
...(
cent os ) , i am able to the detect the device /dev/ttyUSB0
these are the following steps I did :
Check your card is recognized by the kernel
# cat /proc/bus/usb/devices
.....
.....
T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=fff5 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=USB Storage
S: SerialNumber=000000000002
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usbserial_generic
E: Ad=89(I) Atr=02(Bulk) MxPS= 64 Ivl=...
2006 Sep 11
3
new ups for database?
...------- 1 root root 442, 6144 Sep 9 15:32 /dev/usbdev4.1_ep81
###########################################################
[root@luggage usb]# cat /proc/bus/usb/devices
<snipped>
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0001 ProdID=0000 Rev= 1.00
S: Manufacturer=MEC
S: Product=MEC0002
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
--
Cheers,
Dave
2012 Nov 28
1
Issues with USB connectivity
...oundation 1.1 root hub
Bus 002 Device 002: ID 051d:0003 American Power Conversion UPS
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
joavma01:/usr/local/ups/bin # usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=02.06
S: Manufacturer=Linux 2.6.32.54-0.3-default ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:02:03.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 P...
2018 Mar 27
0
problem with nut APC BackUPS RS 1500 (white)
...002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
=============================================
usb-devices returns this:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.10
S: Manufacturer=Linux 3.10.0-693.el7.x86_64 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:02:01.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 P...
2018 Mar 27
0
problem with nut APC BackUPS RS 1500 (white)
...002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
=============================================
usb-devices returns this:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.10
S: Manufacturer=Linux 3.10.0-693.el7.x86_64 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:02:01.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 P...
2018 Mar 27
2
Nut-upsuser Digest, Vol 153, Issue 13
...002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
=============================================
usb-devices returns this:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.10
S: Manufacturer=Linux 3.10.0-693.el7.x86_64 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:02:01.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 P...
2007 Jul 01
3
ST7 RS232 USB Bridge (STMicroelectronics) UPS
..."TS-Shara" which uses the megatec
serial protocol and it works perfectly. Now I have another one from the
same brand (TS-Shara) and it uses a USB cable. I found the following:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0483 ProdID=0035 Rev= 2.00
S: Manufacturer=STMicroelectronics
S: Product=ST7 RS232 USB BRIDGE
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
E: Ad=02(O) Atr=03(Int.)...
2010 Apr 23
1
Liebert powersure psp
Hi,
I have a Liebert POWERSURE PSP connected via USB. Cleanly built and
installed from source nut-2.4.3.tar.gz
using kernel 2.6.30.5
#cat /proc/bus/usb
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=10af ProdID=0003 Rev= 0.00
S: Manufacturer=Liebert
S: Product=Liebert PSP 350 FW: 02
S: SerialNumber=0404200536BT019
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms
# ./upsdr...
2010 Jul 03
0
No subject
...
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=06da ProdID=0002 Rev= 1.00
S: Manufacturer=Powerware
S: Product=Powerware UPS
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 60mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms
...
Should the kernel usb module driver be...