search for: muted

While working on the mge-hid subdriver, I wanted to add the 'beeper.mute' command. Unfortunately, the description I intended to use was used already by the 'beeper.off' instcmd: CMDDESC beeper.off "Temporarily mute the UPS beeper" Now of course we could add another instcmd 'beeper.reallyoff', but instead I would prefer to bite the buller and do the following:

...9;t found anyone with the same issue as this. Anyhow, I was using a Plantronics analog headset and box plugged into a Digium TDM card, dialed out over my VoIP provider's IAX channel to the PSTN. I was in a conference call which is running on an Avaya PBX (which shouldn't matter), and so I muted myself with the mute button on the headset box. After a minute or two, I was asked to speak again, and so I unmuted, but no one could hear me. I tried hitting mute a bunch more times, but still nothing. It was making a difference in the headset though; I could hear myself a little bit when unmuted,...

...command line so for muting conference participants I had to create a small workaround (letting the user leave the conference by letting his AGI background script finish) and then rejoin him using the 'm' flag so that he can keep listening but is not allowed to talk. Now, while the user is muted, I can not read any DTMF tones in the AGI background script. "Okay," you might say, "the user is muted. It makes sense that his DTMF tones do not come through." But I say, "the muting, i.e. the nullification of any incoming audio is done somewhere within Asterisk, why is th...

While researching Areski's new Web-MeetMe management gui, I found some odd (from what I expected) behaviour). Using the CLI to set un/mute status works but does not update the flags, or so it appears. Starting with a fresh conference (1 user) *CLI> meetme list 3456 User #: 1 Channel: OH323/R61 Using the CLI to mute the caller (no change in the user status0 *CLI> meetme mute 3456 1

Hi I'm having a very odd phenomenon happening on our production server (1.4.17 and using realtime). Sometimes a call will disconnect 30 seconds after the SIP phone hits the mute button but it doesn't happen all the time. I've done a sip debug while watching this happen and that doesn't show anything other than a BYE message being sent out of the blue. The rtptimeout and

On Jul 26, 2014, at 9:58 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can mute the beeper temporarily (and this works) but that most UPSs do not allow you to permanently turn it off (I tried using upsrw but it said beeper.status was read only). Can you send the variable list

Daniel Ballenger wrote: > Easy, open up the volume control panel and turn the line in down/mute it I wouldn't fiddle with the fader as some cards use the same setting for playback and record level. But you should be able to mute it just fine by checking the mute checkbox for the line in. Geoff.

One of the features that I thought would be popular with the Web-MeetMe suite is the ability to start all non-admin callers in a muted state and selectively unmute them. For example any large conference that is of an announcment nature with a Q&A session. It's probably a feature I should have tested better, but I just discovered that a caller that is joined to a MeetMe with the |m flag cannot be unmuted with command *cli...

I have a brand new Eaton 5E UPS purchased in Australia. Details: Eaton 5E Model: 5E650iUSB-AU Date: best I can find is the shipping date to supplier on box label - May 2014 OS: Ubuntu 14.04 Server edition Nut 2.7.1 Installed via apt-get install nut I have two problems I would like to fix. First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can

Hi, One of our customers has an issue with the callee not being able to hear them. It seems to happen very frequently on one number in particular where there are about 3 IVR menus to dial through before getting to a live person. However, this does not happen on every call. Running tcpdump on the RTP packets, I can see that RTP is setting sent, but the values in the packet are all very close to

Hi list, I am in need of a "special" asterisk conference room with the following constraints: - there is one admin / moderator and several "normal" callers. - the callers must not hear any other caller, only the moderator - the moderator must be able to mute and unmute any caller at any time - the moderator must be able to talk to all callers or to a specific caller. - the

I have a CyberPower PR3000LCDRTXL2U with a BP48V75ART2U expansion chassis, which I am monitoring using NUT 2.8.0 (on Gentoo Linux). TThe UPS appears to be telling me that the batteries need replacement due to age. CyberPower support has confirmed that for me and told me how i should be able to mute the alarm from the front panel until I can replace the batteries, but it doesn't appear

Dear R-helpers, I am using confint() within a function, and I want to turn off the message it prints: x <- rnorm(100) y <- x^1.1+rnorm(100) nlsfit <- nls(y ~ g0*x^g1, start=list(g0=1,g1=1)) > confint(nlsfit) Waiting for profiling to be done... 2.5% 97.5% g0 0.4484198 1.143761 g1 1.0380479 2.370057 I cannot find any way to turn off 'Waiting for. .." I tried

Hi all, When the Dahdi driver detects DTMF, it seems it's not muting the first 5-15 ms and sometimes the last 2-10 ms of the DTMF tone. This shows up in recorded voicemail greetings -- you hear a very short DTMF '#', or sometimes two blips, at the end of the recording. I have a Mitel SX-200 connected to Asterisk 1.6.0.1 by a couple of Digium cards: a TE420 w/Octasic and pri_net

Hi all! Using C6 on an Asus M5A99X EVO R2.0 motherboard with AMD six core FX6300. That board uses Realtek ALC892 audio chipset. For the first time since I got that motherboard I tried plugging in headphones to the front panel speaker output. I was somewhat displeased to note that the speakers don't mute when that happens. I recall seeing info on that in Fedora, but not Centos, and

Hello, Has anybody been able to get the Mute button work on grandstream? it simply does nothing. Only Hold is avalable, which is not that good. Thanks -- Anton Yurchenko<phila@dg.net.ua> Digital Generation

On Thu, Mar 21, 2024 at 12:23?PM Phil Stracchino via Nut-upsuser < nut-upsuser at alioth-lists.debian.net> wrote: > I have a CyberPower PR3000LCDRTXL2U with a BP48V75ART2U expansion > chassis, which I am monitoring using NUT 2.8.0 (on Gentoo Linux). TThe > UPS appears to be telling me that the batteries need replacement due to > age. CyberPower support has confirmed that for

I have this problem with the game, I posted it in another thread about the game but I got no replies. I also tried searching this problem but I couldn't fine a solution to it.

On 15 March 2008 Johnny Hughes johnny at centos.org wrote: Sat Mar 15 15:25:13 UTC 2008 >In the Gnome mixer, make sure that the "Microphone" and the "capture" >microphone icons are NOT MUTED (a red is is muted) .. also change >devices to the OSS Mixer and in the capture tab, check the microphone >icon for microphone is also not muted there. Johnny: Thank you for replying! I will check those things, ASAP and report back here! Lanny On 15 March 2008, Anne Wilson cannewilson at...

How can I mute the message "please enter the number you wish to call and press the # key" in a2billing??? I tried use_dnid = YES but still I keep getting the message prompt... thanks