search for: multcount

...SecP PriP]) Subsystem: VIA Technologies, Inc. Unknown device 0581 Flags: bus master, medium devsel, latency 32 I/O ports at fc00 [size=16] Capabilities: [b0] Power Management version 2 Which I think is the VIA part. when I do "hdparm /dev/hdc" I get /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 15733/16/63, sectors = 15858864, start = 0 when I do "hdparm -d1 /dev/dhc" I get /dev/hdc: setting usin...

...DOWNLOAD MICROCODE cmd HW reset results: CBLID- above Vih Device num = 1 /sbin/hdparm -Tt /dev/hdd /dev/hdd: Timing buffer-cache reads: 128 MB in 0.95 seconds =134.74 MB/sec Timing buffered disk reads: 64 MB in 2.43 seconds = 26.34 MB/sec /sbin/hdparm /dev/hdd /dev/hdd: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 3684/240/63, sectors = 55704096, start = 0 /etc/samba/smb.conf socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIV...

...I/O ports at 3428 [size=8] I/O ports at 341c [size=4] I/O ports at 3420 [size=8] I/O ports at 3418 [size=4] I/O ports at 30f0 [size=16] I/O ports at 30e0 [size=16] Capabilities: [70] Power Management version 3 # hdparm /dev/hda /dev/hda: multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 24792/255/63, sectors = 203928109056, start = 0 # hdparm /dev/sda /dev/sda: HDIO_GET_MULTCOUNT failed: Inappropriat...

...t. Not sure how or if this is related to the new harddisk settings but we made the changes last friday and this (seriuos) problem happened tuesday and thursday (today) this week. The settings we have now in our harddisks is using udma2 with the following settings as show with hdparm: dev/hda: multcount = 16 (on) IO_support = 3 (32-bit w/sync) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 4865/255/63, sectors = 78165360, start = 0 Does anybody have any suggestions or any idea in what could be the...

...is no more than 10% during this). However if the destination partition for the cp is mounted as ext2, the ls command responds almost immediately. Is there some setting that can be tuned to avoid such a behaviour? I'm currently running RedHat 7.2, kernel 2.4.9-21 hdparm /dev/hda: /dev/hda: multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 2343/240/63, sectors = 35433216, start = 0 And from dmesg: hda: IBM-DARA-218000, ATA DISK dri...

Hi folks, I have an HP Proliant 140DL G2 server with what appears to be an IDE drive in non-DMA mode. Performance on the server is extremely bad when large amounts of disk activity is taking place. I think the problem is that my drive is not in DMA mode: # hdparm /dev/hda /dev/hda: multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 16383/255/63, sectors = 80026361856, start = 0 ...but I can't set it on: # hdparm -d1 /dev/hda /dev/hd...

...rd Video= AGP S3 Trio, w/8MB RAM, PS/2 mouse. Realtek 8029 pci bus network card. Award BIOS 56K external modem on /dev/ttyS1. PS/2 mouse. /dev/hda=2.5 Gig Maxtor 82560A4 drive(windoze 95) /dev/hdb=6.4 Gig Fujitsu MPC 3064AT Drive Unused usb ports. [root@genius /root]# hdparm /dev/hdb /dev/hdb: multcount = 2 (on) I/O support = 1 (32-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 784/255/63, sectors = 12594960, start = 0 I have 2 large partitions on /dev/hdb for linux w...

...rCHS=4047/16/255, CurSects=-217054981, LBA=yes, LBAsects=160086528 tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2 IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4 UDMA modes: mode0 mode1 mode2 mode3 mode4 *mode5 mode6 [ct_sys@installed TEST]# hdparm /dev/hda /dev/hda: multcount = 16 (on) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 9964/255/63, sectors = 160086528, start = 0 Kernel 2.4.20 & 21 both output same d...

...ything. dmesg doesn't show any errors either. Below is the `time` output for each command. If you need anymore information let me know.. The CPU is a PIII866 with 512MB RAM. $ uname -a Linux dev-01 2.4.19-pre10-ac2 #3 Sun Jun 30 18:56:04 EDT 2002 i686 unknown $ hdparm /dev/hda /dev/hda: multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 busstate = 1 (on) $ cat /proc/mounts /dev/hda...

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

...rg 2.4.18-10 #1 Wed Aug 7 11:39:21 EDT 2002 i686 unknown root@arsozah root]# hdparm -Tt /dev/hda /dev/hda: Timing buffer-cache reads: 128 MB in 0.49 seconds =261.22 MB/sec Timing buffered disk reads: 64 MB in 3.12 seconds = 20.51 MB/sec [root@arsozah root]# hdparm -iv /dev/hda /dev/hda: multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 2495/255/63, sectors = 40088160, start = 0 Model=IBM-DPTA-372050, FwRev=P76OA30A, SerialNo=JM...

Hello Folks, We have 2 (identical hardware) busy public 2U rack servers, both have several hundred users & peak email (for example) deliveries at 300/5min during the daytime. Both servers run RAID1 over 2 EIDE disk drives. One server is fine - it never has problems - it is running RH7.3 and CPU loads are normal. The other server has constant disk activity & kjournald at CPU load of