search for: msk0

Hi Yonghyeon and All, >From time to time I use a notebook and boot FreeBSD from USB stick. FreeBSD 9.2-i386 works OK. So I tried to use FreeBSD 10.0-i386 BETA2 and the network adapter works for some 10-15 seconds and then stops with diagnostic message "msk0:watchdog timeout". I've found similar case at freebsd-current@ with no workaround. Yes, there is an interrupt storm as well. Here is some additional info: ----- mskc0 at pci0:3:0:0: class=0x020000 card=0xff501179 chip=0x435511ab rev=0x12 hdr=0x00 vendor = 'Marvell Techno...

Monitoring a tcpdump between two systems, a FreeBSD 9.1 system has the following interface: msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c011b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,VLAN_HWTSO,LINKSTATE> ether 00:11:2f:2a:c7:03 inet 10.0.1.199 netmask 0xffffff00 broadcast 10.0.1.255 inet6 fe80::211:2fff:fe2a:c703%msk0 prefixlen 64 scope...

...splays no data, etc. I'm also using Linux and Windows XP on the same machine, and the same sites are loaded very quickly. Note I'm not using a proxy. My NIC is: mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xcdefc000-0xcdefffff irq 17 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0 msk0: Ethernet address: 00:11:2f:37:d5:19 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0...

Hi, Whilst doing some QA work on XORP on my desktop, which has fxp0 and msk0, fxp0 got totally hosed. I was running PIM-SM and IGMPv2 router-mode on the box at the time. I wonder if this is related to the problems with fxp multicast transmission I saw back in April. I'm a bit concerned about this as fxp is still a very widespread and useful network chip. I am runnin...