search for: mobos

I''ve currently got a Xen 2 system running on a CL10000 VIA system. I''d like to upgrade to Xen 3 and make use of the hardware virtualization support in Xen (sometimes). My requirements then: 1) Cheap CPU. AMD or Intel. Must have Xen3 hardware VM support. Any speed. 2) Lower power consumption from the CPU 3) Cheap mobo to support the chip. 4) Decent raid-1 SATA support on the

I'm looking for a small formfactor mobo for an install that needs to handle 25 phone sets (no transcoding). I found a new dual atom 1.66GHz mobo - anyone know what kinds of call volume that will handle? MD

List, I want to reshape my data, but I'm not sure how to do it... it might be a simple task, but don't know which package does this. "occ.data" (see below) is how my original data are arranged, and I know that with melt() I can reshape it like "y" (see below). However, I just want to build a matrix like the "y" matrix, but with only 2 dimensions. Something

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

Anyone know a good distro for an Epia Mobo with the C3 chip? I have been trying to get Debian and Gentoo installed (new to me) and so far having little luck. Does anyone know a good install for this processor/mobo combo? Thanks Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL:

Had to replace dying cpu and mobo, so also replaced IDE with new SATA drive. Installed from latest ISO onto SATA and can't get networking to lease an IP address from my ISP (Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my

Hi! We (an astronomical center) are building a small cluster for our number-crunching. The problem is that we have 12 mobos A7V600 by Asus (for athlons) - 1 server + 11 diskless nodes. And here comes the trouble... hardware: mobo: a7v600 net: 1 gigabit by 3com - 3c940, integrated in mobo the problem is: dhcp - works fine tftp - works fine pxelinux.0 - downloads fine (I hope) linux kernel - downloads and... and here...

We have 4 systems supported by ASUS M2V mobos with AMD2 cpus on board. No we haven't gotten CentOS of any flavor to work yet. Yes, we did load Fedora Core 6 and it worked, with respect to the SATA driver only. There is a RAID, Audio and LAN driver for Linux that comes on the M2V mobo CD. The audio driver installs and works fine on FC6....

Hi list, i have seen a lot of questions about VT-d on recent intel mobos. however, it seems that all tests are done on the newer socket 775-based xeon''s or core2''s, and not the 5000 series (socket 771 based). i was planning on getting a intel S5000V chipset, but found out that it does not support VT-d. Can anyone confirm a mobo that has this enabled a...

Hi people. I had finally cross my USB to my DomU windows XP, justs 1 issue: USB 2.0 not working only 1.1 is working. I would to confirm with others that have the MoBo ASUS M4A89TD Pro/USB3 if u have been able to passthrough the USB ports to HVM windows? I had try different settings on my BIOS, different settings on Xen 4.1, this under Centos x64 AMD Athlon II 640. I receive the

Hi, I cannot get * to run on my VIA 800 mini-itx MOBO. I keep getting "ouch...broken pipe" errors. I have downloaded mpg123-0.59r and compiled it, so I know that the problem isn't there. I edited *'s Makefile and uncommented the VIA processor section before I compiled Asterisk. Can someone that's been successful with * and the VIA 800 mobo help me out? Thanks, Mike C.

HI All, I have a dilemma and I would appreciate advice 1. Get a good size case, mobo, processor, etc and put 8 hard drives it in and RAID them. (yes an 8 port SATA mobo). Running CentOS. or 2. Get an eSATA enclosure that has room for 8 or 10 drives and just connect it to box? I know that RAID is not a full proof backup, but I am looking for a solution to store all of my data, projects, music,

On Dec 7, 2019, at 7:01 PM, Gene Heskett <gheskett at shentel.net> wrote: > > What driver do I now put in /etc/nut/ups.conf? hid-generic doesn't seem > to want to talk to it, and the original name _(usbhid-ups) doesn't work > from new mobo. Oh wait, I can't spell. But that didn't help, and a > restart gets this error: ... > Dec 07 18:49:46 coyote

Hi, I would like to ask if anyone had a success running Windows as VMX guest on a motherboard with Intel 8xx, Sis 661FX or Via P4M800 or P4M800 Pro chipsets for socket 775. I briefly succeded running Windows XP on PCChips P21G motherboard with Pentium D 930 but now starting WMX guest freezes the machine. I think it has something to do with the motherboard becaue I was not able to boot from IDE

Hi. I got a asus SABERTOOTH 990FX, reading about vt-d, I read the MoBo that support IOMMU and there was chip 990FX, them I pick this MoBo, the BIOS that came with the board was 0402 05/11. I follow the xen wiki, I''m running Xen 4.1.1 from Gitco on Centos 5.7 x64, by default the MoBo have the IOMMU disable, I enable the feature IOMMU = 64MB, save the bios settings, restart, turn off

We recently bought a 32-bit Xeon system with a 12-port 3Ware RAID card and a dozen 500GB drives. We wanted to create 4TB drive arrays; however, we soon discovered that there is about a 2.2TB drive array size limit on 32-bit hardware. Does that sound correct? Would replacing the 32-bit mobo/cpu with a 64-bit mobo/cpu allow us to use drive arrays larger than 2.2TB? Thanks.

Hi Charles; Had a fire on the mobo of my old server, replaced it all with about 10x the hardware. dmesg now says this: 71068.842780] usb 1-9: new full-speed USB device number 10 using xhci_hcd [71069.012577] usb 1-9: New USB device found, idVendor=051d, idProduct=0003 [71069.012579] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [71069.012579] usb 1-9: Product:

Greetings all. I am facing serious problems running ZFS on a storage server assembled out of commodity hardware that is supposed to be Solaris compatible. Although I am quite familiar with Linux distros and other unices, I am new to Solaris so any suggestions are highly appreciated. First I tried SXDE 1/08 creating the following pool: -bash-3.2# zpool status -v tank pool: tank state:

On Sunday 08 December 2019 09:25:29 Roger Price wrote: ls -lF /var/run/nut/ total 8 -rw-r--r-- 1 nut nut 5 Dec 7 18:49 upsd.pid -rw-r--r-- 1 root root 5 Dec 7 18:52 upsmon.pid No permission if I look as gene(me) Now, I do have a /home/nut ls -l /home root at coyote:Daily$ ls -l /home total 16 drwx------ 53 amanda backup 4096 Jul 8 12:22 amanda drwxr-xr-x 72 gene gene 4096 Dec 8 12:17

On Sunday 08 December 2019 22:17:39 Gene Heskett wrote: > On Sunday 08 December 2019 21:48:03 Charles Lepple wrote: > > On Dec 7, 2019, at 7:01 PM, Gene Heskett <gheskett at shentel.net> wrote: > > > What driver do I now put in /etc/nut/ups.conf? hid-generic doesn't > > > seem to want to talk to it, and the original name _(usbhid-ups) > > >