search for: mkaganer

B.H. Hello, all. We have noticed many calls on our PBX get "stuck" - the other end sends BYE, and our side sends ACK but the call remains active (no hangup event on AMI, the call is listed in 'core show channels') and it's impossible to hang up until asterisk is restarted. Asterisk's log shows lots of messages like this: chan_sip.c: Autodestruct on dialog .... with

B.H. Hello! We have several Asterik boxes that are connected to PSTN using PRI cards and they are interconnected using IAX2 trunks so that incoming calls are delivered from PSTN to the servers they belong to. In past we were using asterisk 1.4 on the server that is receiving IAX connections and everything worked as expected. Recently, we have switched to a newer box with asterisk 1.8.22 and

B.H. Hello, i'm using AMI Originate action (with async=true) to send outgoing calls to a SIP trunk (using asterisk-java library to connect to AMI). The problem is that in case of failed originate, OriginateResponse event is returning only the reason code which is sometimes not sufficient to determine the real cause of failure. Also, there's no way to link between the channel that was

B.H. Hello, all :-) We have some OPENVOX D410P PRI cards and we are successfully using them with Asterisk boxes which are based on stock ubuntu 12.04 DAHDI and Asterisk packages. The card is recognized by DAHDI as 'Wildcard TE410P (2nd Gen)' and it uses wct4xxp driver. Now, i'm trying to run this hardware with DAHDI 2.6.2 package which is available from asterisk.org site and looks

B.H. Hello, all I'm using Asterisk 11.7, connected to PSTN using SIP trunk. I'm looking for a way to get data from INVITE's SDP. Specifically, i would like to get a value of o= for incoming call from PSTN because it contains data about the operator that the call originates from. I have googled for a solution and found this patch:

B.H. Hello, all. We have a dialer software that runs outgoing telephony campaigns. We have been using it successfully with PRI cards, now we're evaluating it's use also with a SIP trunk. Most of the things run perfectly good without a need to change anything except for dial string, but there's some strange problem with asterisk interpreting SIP result codes. Our software is written

B.H. Hello, all :-) We have a cluster of Asterisk (v. 11.9) servers that host IVR applications. The servers work behind SIP proxy (kamailio) for load balancing. All servers are in 2 processor configuration, 8-10 cores per CPU. When a particular server gets about 500 concurrent calls, the sound quality begins to degrade, the sound plays slowly and with clicks. As far as i understand, it's