Displaying 6 results from an estimated 6 matches for "methodofflowcontrol".
2011 May 17
3
Powercom issues in NUT (was: PowerCom BNT2000AT ups on nut 2.6.0 - second try)
...; > > ups.conf looks like this! Okay so APC1 is not and APC!
> > >
> > > [APC1]
> > >
> > > driver = powercom
> > > type = BNT
> > > port = /dev/ttyS1
> > > numOfBytesFromUPS = 16
> > > methodOfFlowControl = no_flow_control
> > > validationSequence = {{11,0x42},{8,0},{8,0}}
> > > shutdownArguments = {{1,30},y}
> > > modelname = BNT2000APT
> > > serialnumber = 2233445566
> > > desc = Computer Room Small UPS
> > >...
2007 Dec 29
1
Odd Values For Powercoms
...-- Wierd
driver.name: powercom
driver.parameter.batteryPercentage: {5.0000,0.3268,-825.00,0.46511,0}
driver.parameter.frequency: {0.00020997,0.0}
driver.parameter.linevoltage: 110
driver.parameter.loadPercentage: {6.1343,-0.3808,1.075,0.1811}
driver.parameter.manufacturer: PowerCom
driver.parameter.methodOfFlowControl: dtr0rts1
driver.parameter.numOfBytesFromUPS: 16
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/cuaa0
driver.parameter.shutdownArguments: {{0,10},n}
driver.parameter.type: KIN2200AP
driver.parameter.validationSequence: {{7,0},{8,0},{8,0}}
driver.parameter.voltage: {1.9216,-0.0977,0.82...
2011 May 13
1
PowerCom BNT2000AT ups on nut 2.6.0 - second try
...test nut-2.6.0 emerged today.
Linux kernel version is 2.6.36
UPS is PowerCom BNT2000AT
"Driver" is powercom
ups.conf looks like this! Okay so APC1 is not and APC!
[APC1]
driver = powercom
type = BNT
port = /dev/ttyS1
numOfBytesFromUPS = 16
methodOfFlowControl = no_flow_control
validationSequence = {{11,0x42},{8,0},{8,0}}
shutdownArguments = {{1,30},y}
modelname = BNT2000APT
serialnumber = 2233445566
desc = Computer Room Small UPS
I running /lib/nut/powercom -a APC1 -DDDDDDDDDD (Okay so the debugs are
overboard...
2011 Jul 08
2
Ubuntu 10.04 Ultra 700VA UPS Setup Nut
...v1.00 Device [POWERCOM
Co.,LTD HID UPS Battery] on usb-0000:00:1d.0-1/input0
Here's my etc/nut/ups.conf file:
Code:
# /etc/nut/ups.conf
[Ultra]
driver = powercom
port = port=/dev/hidraw1
linevoltage = 120
manufacturer = Ultra
modelname = ULTRA 700VA
type = Trust
methodOfFlowControl=dtr0rts1
shutdownArguments = {{7,10},y}
Here's what I get when I run sudo upsdrvctl start:
Code:
eric at eric-desktop:~$ sudo upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.4.3)
Unable to open port=/dev/hidraw1:...
2005 Dec 30
2
BNT600AP
Hi,
I have a little problem with PowerCom BNT600AP after running driver I
see: root@rask> powercom -D /dev/ttyS1
Network UPS Tools - PowerCom and similars protocol UPS driver $
Revision: 0.5 $ (2.0.2)
debug level is '1'
Values of arguments:
manufacturer : 'PowerCom'
model name : 'Unknown'
serial number : 'Unknown'
line
2011 May 09
0
PowerCom BNT2000AT ups on nut 2.6.0
...test nut-2.6.0 emerged today.
Linux kernel version is 2.6.36
UPS is PowerCom BNT2000AT
"Driver" is powercom
ups.conf looks like this! Okay so APC1 is not and APC!
[APC1]
driver = powercom
type = BNT
port = /dev/ttyS1
numOfBytesFromUPS = 16
methodOfFlowControl = no_flow_control
validationSequence = {{11,0x42},{8,0},{8,0}}
shutdownArguments = {{1,30},y}
modelname = BNT2000APT
serialnumber = 2233445566
desc = Computer Room Small UPS
I running /lib/nut/powercom -a APC1 -DDDDDDDDDD (Okay so the debugs are
overboard...