search for: memsiz

Use %d to parse them as int (since the variables for them as int) instead of %u, even if they both need to be at least > 0. --smp was already checked to be >= 1 while --memsize not, so check that the specified memory size is not < 128 (which is semi-arbitrary, but enough as a minimum threshold). --- rescue/rescue.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/rescue/rescue.c b/rescue/rescue.c index dc56d4b..1c556e5 100644 --- a/re...

Hi, I finally updated the Debian libguestfs packages: http://honk.sigxcpu.org/con/Libguestfs__Virtual_Machine_Image_Swiss_Army_Knife.html Sine we can't run the fuse tests easily in a chroot (since we might be unable to load the module) I'm using the attached patch to skip the tests if /dev/fuse doesn't exist. This probably isn't clean enough to go upstream though. The other

As you know, HVM save/restore broke recently because restored config miss guest memsize that used by xc_hvm_restore to locate some pfn. After discussion, we decided to remove the pfn deduction logic from restore side by adding a general memory layout. I have a patch for it. But then qemu broke, because it also require the memsize to locate the share page. We can''t use th...

...sing this command. I specifically am trying to understand the loadable segments of this ELF file. I ran readelf -a <filename> to get the information that I need. Below shows the details of the loadable segments in a much better format :- Loading ELF header #1. offset: 1320 filesize: 655360 memsize: 655360 vaddr: 0 paddr: 0 align: 0 flags: 0 Loading ELF header #2. offset: 656680 filesize: 65536 memsize: 65536 vaddr: 0 paddr: a0000 align: 0 flags: 0 Loading ELF header #3. offset: 722216 filesize: 1072955392 memsize: 1072955392 vaddr: 0 paddr: c0000 align: 0 flags: 0 Loading ELF header #4. off...

...stomize/customize_main.ml b/customize/customize_main.ml index e161e82..13d40bc 100644 --- a/customize/customize_main.ml +++ b/customize/customize_main.ml @@ -166,9 +166,8 @@ read the man page virt-customize(1). (* Connect to libguestfs. *) let g = let g = open_guestfs () in - - (match memsize with None -> () | Some memsize -> g#set_memsize memsize); - (match smp with None -> () | Some smp -> g#set_smp smp); + may g#set_memsize memsize; + may g#set_smp smp; g#set_network network; (* Make sure to turn SELinux off to avoid awkward interactions * betwee...

...h is 8960, if divided by 1024, so at least it''s consistent. However... > The machine has 8G of memory, running xen 4.3 rc6, with dom0_mem=1024M. ''xl > info --numa'' says > > total_memory : 8190 > ... > numa_info : > node: memsize memfree distances > 0: 8960 7116 10 > > Why is the node memsize > total_memory? Mmm... Interesting question. I really never paid attention to this... Jan (or anyone else), is that something known and/or expected? I went checking this down in Xen, and here...

...ecifically am trying to understand the loadable segments of this ELF >file. > >I ran readelf -a <filename> to get the information that I need. Below shows >the details of the loadable segments in a much better format :- > >Loading ELF header #1. offset: 1320 filesize: 655360 memsize: 655360 vaddr: >0 paddr: 0 align: 0 flags: 0 >Loading ELF header #2. offset: 656680 filesize: 65536 memsize: 65536 vaddr: >0 paddr: a0000 align: 0 flags: 0 >Loading ELF header #3. offset: 722216 filesize: 1072955392 memsize: >1072955392 vaddr: 0 paddr: c0000 align: 0 flags: 0 >Lo...

...@@ let main () = (* Now mount the output disk so we can make changes. *) message (f_"Opening the new disk"); let g = - let g = new G.guestfs () in - if trace () then g#set_trace true; - if verbose () then g#set_verbose true; + let g = open_guestfs () in (match memsize with None -> () | Some memsize -> g#set_memsize memsize); (match smp with None -> () | Some smp -> g#set_smp smp); diff --git a/customize/customize_main.ml b/customize/customize_main.ml index 49d510c..e161e82 100644 --- a/customize/customize_main.ml +++ b/customize/customize_main....

...r than what would get with ld.gold or ld.bfd. # readelf -l test.bfd Elf file type is EXEC (Executable file) Entry point 0x4000b0 There are 2 program headers, starting at offset 64 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000000000 0x0000000000400000 0x0000000000400000 0x00000000000000c0 0x00000000000000c0 R E 0x200000 GNU_STACK 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000000000...

...size%s%s%s --output-format %s%s%s %s %s" @@ -608,7 +609,8 @@ let main () = msg (f_"Opening the new disk"); let g = let g = new G.guestfs () in - if verbose then g#set_trace true; + if trace then g#set_trace true; + if verbose then g#set_verbose true; (match memsize with None -> () | Some memsize -> g#set_memsize memsize); (match smp with None -> () | Some smp -> g#set_smp smp); -- 2.1.0

...of RAM to decrypt the block device, which is considerably larger than the default available in the libguestfs appliance. To make it possible to open these encrypted disks we need to make the appliance larger. This could be done as a one-off, and the current workaround is simply to set LIBGUESTFS_MEMSIZE=2048 or a similar amount. However since we don't know in advance whether we could be dealing with an encrypted disk, partition, etc. or what PBKDF it uses, the only way to deal with this in all circumstances is to increase the default memsize. This commit increases it quite a lot (768 ->...

...all.h" + +/* write SMBIOS tables starting at ''start'', without writing more + than ''max_size'' bytes. + + Return the number of bytes written +*/ +static size_t +write_smbios_tables(void *start, size_t max_size, + uint32_t vcpus, uint64_t memsize, + uint8_t uuid[16], char *xen_version, + uint32_t xen_major_version, uint32_t xen_minor_version); + +static void +get_cpu_manufacturer(char *buf, int len); +static size_t +smbios_table_size(uint32_t vcpus, const char *xen_version, + const cha...

...e resulting binary (and what ld.bfd produces) is that no ELF headers are allocated in the address space, e.g. Elf file type is EXEC (Executable file) Entry point 0x80001a0f There are 1 program headers, starting at offset 52 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0x001000 0x80000000 0x80000000 0x08284 0x08284 RWE 0x1000 Section to Segment mapping: Segment Sections... 00 .text .rodata .eh_frame .data However, what ldd does is different. (To create a single segment I use --omagic argument, it works fine and is unrelate...

I?ve got a 512M machine and a 330M ( uncompressed ) initrd image. How can I mount the ramdisk? Normal booting seems to want to copy the entire initrd image into a Ramdisk, thus requiring 2X the memory. So what happens is the kernel boots correctly and I get, RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 330000 blocks [ 1 disk ] into ram disk And then I never see the light of day after

I?ve got a 512M machine and a 330M ( uncompressed ) initrd image. How can I mount the ramdisk? Normal booting seems to want to copy the entire initrd image into a Ramdisk, thus requiring 2X the memory. So what happens is the kernel boots correctly and I get, RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 330000 blocks [ 1 disk ] into ram disk And then I never see the light of day after

...the terms of the GNU General Public License as published by @@ -77,11 +77,7 @@ let remove_duplicates index = let main () = (* Command line argument parsing - see cmdline.ml. *) - let mode, arg, - arch, attach, cache, check_signature, curl, - delete_on_failure, format, gpg, list_format, memsize, - network, ops, output, size, smp, sources, sync = - parse_cmdline () in + let cmdline = parse_cmdline () in (* If debugging, echo the command line arguments and the sources. *) if verbose () then ( @@ -91,29 +87,29 @@ let main () = iteri ( fun i (source, fingerprint) -...

Hi, I tried to rewrite virt-rescue from C to OCaml. Goals were feature parity with C implementation, smaller codebase and hopefully better maintainability. I still don't know if I've covered everything right. So, please check it out. PS: my git send-email seems to be broken, so I'm sending it from thunderbird Thanks! maros

--autosysroot option uses suggestions to user on how to mount filesystems and change root suggested by --suggest option in virt-rescue. Commands are passed on kernel command line in format guestfs_command=command;. Command ends with a semicolon and there can be multiple commands specified. These are executed just before bash starts. On successfull run user is presented directly with bash in

...type : string; + size : int64; + root_label : string option; + install_type : string; + image_cache : string option; + compressed : bool; + qemu_img_options : string option; + mkfs_options : string option; + is_ramdisk : bool; + ramdisk_element : string; + extra_packages : string list; + memsize : int option; + network : bool; + smp : int option; + delete_on_failure : bool; + formats : string list; + arch : string; + envvars : string list; +} + +let parse_cmdline () = let usage_msg = sprintf (f_"\ %s: run diskimage-builder elements to generate images @@ -220,8 +250,15...

On Monday, 18 July 2016 09:38:43 CEST Richard W.M. Jones wrote: > On Mon, Jul 18, 2016 at 10:13:30AM +0200, Pino Toscano wrote: > > Since we are using gnulib already, make use of xstrtol to parse the > > integer arguments to avoid extra suffixes, etc. > > > > Fixes commit 0f7bf8f714898c606e5d5015fff5b7803dcd1aee. > > --- > > mllib/getopt-c.c | 34