search for: megaraids

List, I have attempted to make my own megaraid driver disk for a Dell PowerEdge 2300. The procedure I'm using is detailed at the end of this message. In short, I followed samples that I collected after Googling around. The problem I face is that the CentOS 4 installer can't seem to mount the driver disk after I have created it. It gives no information other than, "Cannot

Have you checked the compile time in the boot messages to see you''re actually booting the kernel you think you are? The compile warnings are nothing to do with Xen. Ian > -----Original Message----- > From: xen-users-bounces@lists.xensource.com > [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of > Navid Khalili > Sent: 09 August 2005 02:48 > To:

A gentle reminder on this issue Please can any one help on this problem? ________________________________ From: Manyam, Ramesh Sent: Wednesday, November 19, 2008 7:46 PM To: xen-devel@lists.xensource.com Subject: megaraid sas driver failing in Xen-3.4 unstable version On Xen-3.4 (unstable version), I have created CentOS HVM guest & WS2K8 HVM guest and dedicated MegaRAID SAS controller but

Hi all, I''ve been using Xen for a while and I am trying to install it onto a Dell Poweredge 2950. The 2850 uses a PERC4/Di raid on motherboard, which requires the LSI Legacy SCSI Raid driver to be compiled into the 2.6.11-xen0 kernel. I''ve been recompiling the kernel by: 1. Go into the linux-2.6.11-xen0 directory. Select the driver using "make ARCH=xen

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

Hallo, I have to try install xen-4 on dell pe2850 (Raid: perc4). booterror: megaraid Couldn''t register IRQ 7! But megaraid works with linux-2.6.18.8. Enclosed my tests: 1. Compile xen-4.0 + linux-2.6.32 snapshot (Jeremy) from [8] (test 1). cd /usr/src/xen-b29254c make all modules modules_install 2>&1 | tee make.out cp -p ./arch/x86/boot/bzImage /boot/vmlinux-2.6.32 #

Hi, what to do, if the kernel hangs on boot time with: megaraid: ABORTING-1 cmd=12 <c=0 t=0 l=0> megaraid: ABORTING-1[d7] fw owner Konrad Naumann _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Hello, I''m trying to install Xen3 on a server, but I can''t make the MegaRAID driver work. I''ve installed Debian Sarge, the stock kernel (2.6.8.2) works perfectly with the hardware. The SCSI RAID driver is megaraid. Hardware is : - IBM eServer xSeries 330 server - Dell PowerEdge RAID II controller I''ve recompiled the xen dom0 kernel (2.6.12.6) to include

On Xen-3.3.0, domain0 Megaraid SAS (SAS 1068 controller) driver is not loading correctly if vtd support in Xen is enabled. It fails at the point of initializing firmware. I wasn''t seeing this error with Xen-3.2.2-rc3 (Unstable version), though with vtd disabled in Xen-3.3.0, it is working. Looks like a degrade problem. Any clues? Thx, Venkat

On Xen-3.4 (unstable version), I have created CentOS HVM guest & WS2K8 HVM guest and dedicated MegaRAID SAS controller but I am not able to see the disk which is connected to MegaRAID SAS controller when I do fdisk -l (vtd support is enabled in Xen). Looks like the pci device(MegaRAID SAS controller) is getting dedicated successfully as I can see the device in the list of pci devices shown by

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

I've been googling, and haven't yet found the answer: does anyone here know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger than 2TB? mark

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID

Hi, I'm trying to install Centos 4.3 x86 on a PE 1400SC but the install doesn't find any HD's. So then I get the option to load a module, so I choose for the megaraid_mbox module for the LSI LOGIC 4CH PERC but my RAID5 still doesn't get recognised. Had the same problem 2 years ago with FC3 wich was due to the megaraid module wich got obsolete in the 2.6 kernel but somebody filed

Hello, Problem: Debian(linux-image-xen-686) Dom0 does not boot from LSI MegaRaid I''m sorry, because I don''t know if I''m at the right place to ask for a solution for my problem, because it might be Debian related. Nethertheless I try: Xen Kernel are in Debian Unstable for a month or so. I''m running an Etch (testing) machine here and I wanted to try out

Does anyone have the 'MegaRAID Storage Manager' GUI working on CentOS 5.5? I can run it, but it won't let me log in. The docs state that it requires the local root username and password - but it always rejects this with "Message = Login failed: Invalid username or password!" Thanks James Pearson

Release notes say no support for the RAID card in a box I just picked up...is there no hope for this box running 2.6 kernel? http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/release- notes/as-x86/ The kernel shipped with Red Hat Enterprise Linux 4 includes the new megaraid_mbox driver from LSI Logic, which replaces the megaraid driver. The megaraid_mbox driver has an improved design,