search for: mdma1

...16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 AdvancedPM=no WriteCache=enabled Drive conforms to: unknown: * signifies the current active mode So from recommendation on website I did this to match MaxMultiSect: hdparm -m16 /dev/hda then tried this to turn MultSect off: hdparm -m0 /dev/hda Still get...

We run several RH7.2/7.3 servers & recently 2 of them, although still working fine, have started to show kjournald as generally using over 50% cpu% on 'top' - virtually continuously. Free cpu% generally less than 25% now! Both machines are also using software RAID5 EIDE ....... otherwise are standard server installs. Any info on what kjournald is & why it should have recently

Hello Folks, We have 2 (identical hardware) busy public 2U rack servers, both have several hundred users & peak email (for example) deliveries at 300/5min during the daytime. Both servers run RAID1 over 2 EIDE disk drives. One server is fine - it never has problems - it is running RH7.3 and CPU loads are normal. The other server has constant disk activity & kjournald at CPU load of

...55704096 device size with M = 1024*1024: 27199 MBytes Capabilities: LBA, IORDY(can be disabled) Buffer size: 512.0kB Queue depth: 1 Standby timer values: spec'd by Standard R/W multiple sector transfer: Max = 16 Current = 16 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRIT...

...6/63, TrkSize=0, SectSize=0, ECCbytes=34 BuffType=DualPortCache, BuffSize=1961kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=40088160 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 AdvancedPM=no Drive Supports : ATA/ATAPI-4 T13 1153D revision 17 : ATA-1 ATA-2 ATA-3 ATA-4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 4:15pm up 14 days, 23:58, 2 users, load average: 10.72, 7.41, 6.20 vmstat 5 procs...

...ize=32256, SectSize=512, ECCbytes=4 BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=73400320 IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 published, ANSI NCITS 340-2000: * signifies the current active mode The bonnie numbers show for sequential output: Good Machine Host: 76,857K/Sec My Machine Host: 72,561K/Sec Good Machine Cent...

...Size=579, ECCbytes=4 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=58605120 IORDY=yes, tPIO={min:400,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 udma5 AdvancedPM=yes: mode=0x80 (128) Drive Supports : ATA/ATAPI-5 T13 1321D revision 3 : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 [root@inspiron root]# hdparm -i /dev/hdb /dev/hdb: Model=LG DVD-ROM DRN-8080B, FwRev=2.01, SerialNo=2001/08/20 Config={ Fixed Rem...

...Size=57600, SectSize=600, ECCbytes=74 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 * signifies the current active mode Any suggestions welcomed. Thanks! --Chris

...TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=7898kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78140160 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: 2 3 4 5 BTW I set udma2 (hdparm -X udma2 /dev/hda) otherwise there was no star. No difference in performance (below). --------------------------------...

My apologies in advance for asking such an elementary question. I called myself searching the Installation Guide and Deployment Guide, with no success. The situation is that I bought a Lite-On ATAPI iHAP122 that will not burn DVDs unless I use hdparm to turn dma off. I bought that drive because it was a rare beige drive. Until I can find a decent DVD burner and/or get a Windows machine put

...6/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=66055248 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive Supports : Reserved : Reserved : Reserved : ATA/ATAPI-6 T13 1410D revision 1 : Reserved : Reserved : Reserved : ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ----------------- The initial problem I encountered with the drive is th...

...TrkSize=57600, SectSize=600, ECCbytes=40 BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=20044080 IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 *udma4 AdvancedPM=no WriteCache=enabled Drive conforms to: device does not report version: 1 2 3 4 /sbin/lspci= 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [K...

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

root at five-72 ~ # dd if=/dev/zero of=/dev/sdb bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 8.67101 s, 121 MB/s root at five-72 ~ # parted /dev/sdb GNU Parted 2.1 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mklabel gpt (parted) print Model: ATA ST3000DM001-1CH1 (scsi) -->

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

Hello, With reference to the problems listed below. I too am having incredibly long start up times. I''m talking minutes here (around 5 minutes). My configuration is not complex I don''t think. We are you using ldap too and the settings are bellow. The network is up as I''m restarting shorewall whilst the machine is running. Any suggestions? Is there no way to

When I copy a file(13Megs) from /home/ to /tmp/, sync takes almost 2 minutes. When I copy the same file to /usr/local/, sync returns almost right away. Both filesystems are ext3 and are on the same harddrive. When sync is running, the harddrive light stays on but I don't hear it doing anything. dmesg doesn't show any errors either. Below is the `time` output for each command. If you